Insight into the performance of composite binder with high-volume steel slag, blast furnace slag and desulfurization gypsum

Abstract

The performance of composite binders with high-volume steel slag (SS), granulated blast furnace slag (GBFS) and desulfurization gypsum (DG) were systematically investigated. The results show that the synergistic effects of high volume (40–60%) of SS with GBFS and less than 15% of DG could perform adequate setting time, higher strength, well volume stability and soundness as well as dense microstructure. The higher compressive strengths exceeding 70 MPa at 28 days and up to 80 MPa at 90 days could be obtained for composite pastes with high-volume SS, which exhibit tight relationships with [CaO]·[SO₃]/[Al₂O₃]·[SiO₂] and [CaO]·[Al₂O₃]/[SO₃]² molar ratios. More (15–19%) AFt and less (about 1%) portlandite produced during the hydration of composite binders. C–S–H gels and calcite crystals were formed. The composite binder possesses lower energy consumption, high carbon reduction and low cost compared with Portland cement in favor of the low-carbon cementitious material production and effective utilization of SS.

Keywords:

• Steel slag
• composite cementitious material
• compressive strength
• volume stability
• low carbon

Disclosure statement

No potential conflict of interest was reported by the author(s).

Additional information

Funding

This research work was supported by the National Key R&D Program of China (2021YFB3802002) and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).