Open access
4,188
Views
9
CrossRef citations to date
0
Altmetric
Research Article
Hydrogel-elastomer-based stretchable strain sensor fabricated by a simple projection lithography method
Zhenqing Lia Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
, Xiangnan Hea Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
, Jianxiang Chenga Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
, Honggeng Lia Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
, Yuan-Fang Zhangc Digital Manufacturing and Design Centre, Singapore University of Technology and Design, SingaporeCorrespondence[email protected]
View further author information
, View further author information
Xiaojuan Shid Department of Mechanical Engineering, University of Colorado Denver, Denver, CO, USA;e National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin, P. R. ChinaView further author information
, Kai Yud Department of Mechanical Engineering, University of Colorado Denver, Denver, CO, USAView further author information
, Hui Ying Yangc Digital Manufacturing and Design Centre, Singapore University of Technology and Design, SingaporeView further author information
& Qi Gea Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaCorrespondence[email protected]
View further author information
show allView further author information
Pages 256-268
|
Received 01 May 2021, Accepted 29 Jun 2021, Published online: 22 Jul 2021
Reprints and Permissions
This is an open access article distributed under the terms of the Creative Commons CC BY license, which permits unrestricted use, distribution, reproduction in any medium, provided the original work is properly cited.
You are not required to obtain permission to reuse this article in part or whole.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.