References
- Kon M, Ishikawa K, Kuwayama N. Effects of zirconia addition on fracture toughness and bending strength of dental porcelains. Dent Mater J 1990; 9: 181–92
- Handan Y, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics. J Prosthet Dent 2007; 98: 120–8
- Giordano R 2nd. A comparison of all-ceramic restorative systems: part 2. Gen Dent 2000;48:38–40, 43–5.
- Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004; 92: 557–62
- Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995; 8: 239–46
- Teixeira EC, Piascik JR, Stoner BR, Thompson JY. Dynamic fatigue and strength characterisation of three ceramic materials. J Mater Sci – Mater Med 2007; 18: 1219–24
- Tinschert J, Zwez D, Marx R, Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 2000; 28: 529–35
- Tinschert J, Natt G, Mautsch W, Augthum M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina- and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001; 14: 231–8
- Guazzato M, Proos K, Quach L, Swain MV. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 2004; 25: 5045–52
- Curtis AR, Wright AJ, Fleming GJP. The influence of simulated masticatory loading regimes on the bi-axial flexure strength and reliability of a Y-TZP dental ceramic. J Dent 2006; 34: 317–25
- Pittayachawan P, McDonald A, Petrie A, Knowles JC. The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic. Dent Mater 2007; 23: 1018–29
- Kosmač T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999; 15: 426–33
- Jung YG, Peterson IM, Kim DK, Lawn BR. Lifetime-limiting strength degradation from contact fatigue in dental ceramics. J Dent Res 2000; 79: 722–31
- Fischer H, Weber M, Marx R. Lifetime prediction of all-ceramic bridges by computational methods. J Dent Res 2003; 82: 238–42
- Milleding P, Karlsson S, Nyborg L. On the surface elemental composition of non-corroded and corroded dental ceramic materials in vitro. J Mater Sci – Mater Med 2003; 14: 557–66
- Crispin BJ, Okamoto SK, Globe H. Effect of porcelain crown sub-structures on visually perceivable value. J Prosthet Dent 1991; 66: 209–12
- Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: Core materials. J Prosthet Dent 2002; 88: 4–9
- Ardlin BI. Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 2002; 18: 590–5
- ISO Standard No. 6872, Dental ceramic, 2nd edn. Geneva: International Organization for Standardization; 1995. p. 1–9.
- Gallister WD. Materials science and engineering – an introduction7th edn. John Wiley & Sons, New York 2007; 155–60
- Garvie RC, Nicholson PS. Phase analysis in zirconia systems. J Am Ceram Soc 1972; 55: 303–5
- Sobrinho LC, Glover RH, Knowles JC, Cattell MJ. Comparison of the wet and dry fatigue properties of all ceramic crowns. J Mater Sci Mater Med 1998; 9: 517–12
- Itinoche KM, Özcan M, Bottino MA, Oyafuso D. Effect of mechanical cycling on the flexural strength of densely sintered ceramics. Dent Mater 2006; 22: 1029–34
- Hsueh CH, Luttrell CR, Becher PF. Analyses of multilayered dental ceramics subjected to biaxial flexure tests. Dent Mater 2006; 22: 460–9
- Luthardt RG, Holzhüter M, Sandkuhl O, Herold V, Schnapp JD, Kuhlisch E, et al. Reliability and properties of ground Y-TZP-Zirconia ceramics. J Dent Res 2002; 81: 487–91
- Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999; 20: 1–25