References
- Abdulkareem, Haval A. 2016. “Thermal Comfort Through the Microclimates of the Courtyard. A Critical Review of the Middle-Eastern Courtyard House as a Climatic Response.” Procedia - Social and Behavioral Sciences 216: 662–674. doi:https://doi.org/10.1016/j.sbspro.2015.12.054.
- Abo Einan, Osama, Merhan Mohamed Shahda, and Rash Adil. 2019. “Effect of Mass Formation on Indoor Thermal Performance in the Arab Region.” Port-Said Engineering Research Journal 23 (1): 1–9. doi:https://doi.org/10.21608/pserj.2019.32530.
- Aboeinen, Osama, Naglaa Megahed, and Rana El-Reialy. 2017. “High-Performance Façade: Design Methods and Technologies.” Port-Said Engineering Research Journal 21 (2): 28–36. doi:https://doi.org/10.21608/pserj.2017.33230.
- Agyenim, Francis, Neil Hewitt, Philip Eames, and Mervyn Smyth. 2010. “A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS).” Renewable and Sustainable Energy Reviews 14 (2): 615–628. doi:https://doi.org/10.1016/j.rser.2009.10.015.
- Ahangari, Mohamad, and Mehdi Maerefat. 2019. “An Innovative PCM System for Thermal Comfort Improvement and Energy Demand Reduction in Building Under Different Climate Conditions.” Sustainable Cities and Society 44: 120–129. doi:https://doi.org/10.1016/j.scs.2018.09.008.
- Akeiber, Hussein, Payam Nejat, Muhd Zaimi Abd Majid, Mazlan A. Wahid, Fatemeh Jomehzadeh, Iman Zeynali Famileh, John Kaiser Calautit, Ben Richard Hughes, and Sheikh Ahmad Zaki. 2016. “A Review on Phase Change Material (PCM) for Sustainable Passive Cooling in Building Envelopes.” Renewable and Sustainable Energy Reviews 60: 1470–1497. doi:https://doi.org/10.1016/j.rser.2016.03.036.
- Al-Absi, Zeyad Amin, Mohd Isa Mohd Hafizal, Mazran Ismail, Ahmad Mardiana, and Azhar Ghazali. 2020. “Peak Indoor air Temperature Reduction for Buildings in hot-Humid Climate Using Phase Change Materials.” Case Studies in Thermal Engineering 22: 100762. doi:https://doi.org/10.1016/j.csite.2020.100762.
- Al-Janabi, Ali, and Miroslava Kavgic. 2019. “Application and Sensitivity Analysis of the Phase Change Material Hysteresis Method in EnergyPlus: A Case Study.” Applied Thermal Engineering 162: 114222. doi:https://doi.org/10.1016/j.applthermaleng.2019.114222.
- Al-Yasiri, Qudama, and Márta Szabó. 2021. “Influential Aspects on Melting and Solidification of PCM Energy Storage Containers in Building Envelope Applications.” International Journal of Green Energy 18 (9): 966–986. doi:https://doi.org/10.1080/15435075.2021.1890082.
- Alawadhi, Esam M., and Hashem J. Alqallaf. 2011. “Building Roof with Conical Holes Containing PCM to Reduce the Cooling Load: Numerical Study.” Energy Conversion and Management 52 (8): 2958–2964. doi:https://doi.org/10.1016/j.enconman.2011.04.004.
- Al horr, Yousef, Mohammed Arif, Martha Katafygiotou, Ahmed Mazroei, Amit Kaushik, and Esam Elsarrag. 2016. “Impact of Indoor Environmental Quality on Occupant Well-Being and Comfort: A Review of the Literature.” International Journal of Sustainable Built Environment 5 (1): 1–11. doi:https://doi.org/10.1016/j.ijsbe.2016.03.006.
- Alqallaf, Hashem J., and Esam M. Alawadhi. 2013. “Concrete Roof with Cylindrical Holes Containing PCM to Reduce the Heat Gain.” Energy and Buildings 61: 73–80. doi:https://doi.org/10.1016/j.enbuild.2013.01.041.
- Arivazhagan, R., S. Arun Prakash, P. Kumaran, S. Sankar, Ganesh Babu Loganathan, and A. Arivarasan. 2020. “Performance Analysis of Concrete Block Integrated with PCM for Thermal Management.” Materials Today: Proceedings 22: 370–374. doi:https://doi.org/10.1016/j.matpr.2019.06.714.
- Ascione, Fabrizio, Nicola Bianco, Rosa Francesca De Masi, Filippo de’ Rossi, and Giuseppe Peter Vanoli. 2014. “Energy Refurbishment of Existing Buildings Through the use of Phase Change Materials: Energy Savings and Indoor Comfort in the Cooling Season.” Applied Energy 113: 990–1007. doi:https://doi.org/10.1016/j.apenergy.2013.08.045.
- Auzeby, Marine, Shen Wei, Chris Underwood, Chao Chen, Haoshu Ling, Song Pan, Bobo Ng, Jess Tindall, and Richard Buswell. 2017. “Using Phase Change Materials to Reduce Overheating Issues in UK Residential Buildings.” Energy Procedia 105: 4072–4077. doi:https://doi.org/10.1016/j.egypro.2017.03.861.
- BAPPU-evo. n.d. “Technical Specifications.” Accessed 2 August 2021. https://www.bappu.de/de/komponenten/technische-daten.
- Barzin, Reza, John J. J. Chen, Brent R. Young, and Mohammed M. Farid. 2015. “Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling.” Applied Energy 158: 412–421. doi:https://doi.org/10.1016/j.apenergy.2015.08.088.
- Bastani, Arash, Fariborz Haghighat, and Celia Jalon Manzano. 2015. “Investigating the Effect of Control Strategy on the Shift of Energy Consumption in a Building Integrated with PCM Wallboard.” Energy Procedia 78: 2280–2285. doi:https://doi.org/10.1016/j.egypro.2015.11.365.
- Belmonte, J. F., P. Eguía, A. E. Molina, and J. A. Almendros-Ibáñez. 2015. “Thermal Simulation and System Optimization of a Chilled Ceiling Coupled with a Floor Containing a Phase Change Material (PCM).” Sustainable Cities and Society 14: 154–170. doi:https://doi.org/10.1016/j.scs.2014.09.004.
- Bolteya, Ahmed M., Mohamed A. Elsayad, and Adel M. Belal. 2021. “Thermal Efficiency of PCM Filled Double Glazing Units in Egypt.” Ain Shams Engineering Journal 12 (2): 1523–1534. doi:https://doi.org/10.1016/j.asej.2020.12.004.
- Cabeza, Luisa F., Lidia Navarro, Anna Laura Pisello, Lorenzo Olivieri, Cesar Bartolomé, José Sánchez, Servando Álvarez, and Jose Antonio Tenorio. 2020. “Behaviour of a Concrete Wall Containing Micro-Encapsulated PCM After a Decade of its Construction.” Solar Energy 200: 108–113. doi:https://doi.org/10.1016/j.solener.2019.12.003.
- Chhugani, Bharat, Felix Klinker, Helmut Weinlaeder, and Michaela Reim. 2017. “Energetic Performance of two Different PCM Wallboards and Their Regeneration Behavior in Office Rooms.” Energy Procedia 122: 625–630. doi:https://doi.org/10.1016/j.egypro.2017.07.360.
- Chow, Tin-Tai, and Yuanli Lyu. 2017. “Numerical Analysis on the Advantage of Using PCM Heat Exchanger in Liquid-Flow Window.” Applied Thermal Engineering 125: 1218–1227. doi:https://doi.org/10.1016/j.applthermaleng.2017.07.098.
- Cui, Weilin, Guoguang Cao, Jung Ho Park, Qin Ouyang, and Yingxin Zhu. 2013. “Influence of Indoor air Temperature on Human Thermal Comfort, Motivation and Performance.” Building and Environment 68: 114–122. doi:https://doi.org/10.1016/j.buildenv.2013.06.012.
- Cunha, Sandra, José B. Aguiar, and António Tadeu. 2016. “Thermal Performance and Cost Analysis of Mortars Made with PCM and Different Binders.” Construction and Building Materials 122: 637–648. doi:https://doi.org/10.1016/j.conbuildmat.2016.06.114.
- de Gracia, Alvaro, Lidia Navarro, Albert Castell, and Luisa F. Cabeza. 2015. “Energy Performance of a Ventilated Double Skin Facade with PCM Under Different Climates.” Energy and Buildings 91: 37–42. doi:https://doi.org/10.1016/j.enbuild.2015.01.011.
- Devaux, Paul, and Mohammed Mehdi Farid. 2017. “Benefits of PCM Underfloor Heating with PCM Wallboards for Space Heating in Winter.” Applied Energy 191: 593–602. doi:https://doi.org/10.1016/j.apenergy.2017.01.060.
- Dinçer, İ, and M. A. Rosen. 2010. “Thermal Energy Storage (TES) Methods.” In Thermal Energy Storage.
- El-Ahwal, Mostafa, Ashraf Abd Elfattah Elmokadem, Naglaa Megahed, and Dalia EL-Gheznawy. 2016. “Methodology for the Design and Evaluation of Green Roofs in Egypt.” Port-Said Engineering Research Journal 20 (1): 35–43. doi:https://doi.org/10.21608/pserj.2016.33631.
- El-Bastawisy, Magdy, Wagih Fawzy, Ashraf El-Moqadem, and Arch Naglaa. 2004. “Guidelines and Criteria for Enhancing Thermal Comfort in Residential Areas, Port-Fouad, Egypt.” Port-Said Engineering Research Journal 8 (1): 273–293.
- Elarga, Hagar, Francesco Goia, Angelo Zarrella, Andrea Dal Monte, and Ernesto Benini. 2016. “Thermal and Electrical Performance of an Integrated PV-PCM System in Double Skin Façades: A Numerical Study.” Solar Energy 136: 112–124. doi:https://doi.org/10.1016/j.solener.2016.06.074.
- Elgheznawy, Dalia, and Sara Eltarabily. 2021. “The Impact of sun Sail-Shading Strategy on the Thermal Comfort in School Courtyards.” Building and Environment 202: 108046. doi:https://doi.org/10.1016/j.buildenv.2021.108046.
- Elmokadem, Ashraf A., Naglaa A. Megahed, and Dina S. Noaman. 2016. “Towards a Computer Program for Building-Integrated Wind Technologies.” Energy and Buildings 117: 230–244. doi:https://doi.org/10.1016/j.enbuild.2016.02.022.
- Evola, G., L. Marletta, and F. Sicurella. 2014. “Simulation of a Ventilated Cavity to Enhance the Effectiveness of PCM Wallboards for Summer Thermal Comfort in Buildings.” Energy and Buildings 70: 480–489. doi:https://doi.org/10.1016/j.enbuild.2013.11.089.
- Fateh, Amirreza, Davide Borelli, Francesco Devia, and Helmut Weinläder. 2018. “Summer Thermal Performances of PCM-Integrated Insulation Layers for Light-Weight Building Walls: Effect of Orientation and Melting Point Temperature.” Thermal Science and Engineering Progress 6: 361–369. doi:https://doi.org/10.1016/j.tsep.2017.12.012.
- Figueiredo, António, Romeu Vicente, José Lapa, Claudino Cardoso, Fernanda Rodrigues, and Jérôme Kämpf. 2017. “Indoor Thermal Comfort Assessment Using Different Constructive Solutions Incorporating PCM.” Applied Energy 208: 1208–1221. doi:https://doi.org/10.1016/j.apenergy.2017.09.032.
- Gao, Yanna, Fan He, Xi Meng, Ziyun Wang, Ming Zhang, Hanting Yu, and Weijun Gao. 2020. “Thermal Behavior Analysis of Hollow Bricks Filled with Phase-Change Material (PCM).” Journal of Building Engineering 31: 101447. doi:https://doi.org/10.1016/j.jobe.2020.101447.
- Goia, Francesco, Marco Perino, and Matthias Haase. 2012. “A Numerical Model to Evaluate the Thermal Behaviour of PCM Glazing System Configurations.” Energy and Buildings 54: 141–153. doi:https://doi.org/10.1016/j.enbuild.2012.07.036.
- Guo, Rui, Yue Hu, Mingzhe Liu, and Per Heiselberg. 2019. “Influence of Design Parameters on the Night Ventilation Performance in Office Buildings Based on Sensitivity Analysis.” Sustainable Cities and Society 50: 101661. doi:https://doi.org/10.1016/j.scs.2019.101661.
- Hamidi, Youssef, Zakaria Aketouane, Mustapha Malha, Denis Bruneau, Abdellah Bah, and Rémy Goiffon. 2021. “Integrating PCM Into Hollow Brick Walls: Toward Energy Conservation in Mediterranean Regions.” Energy and Buildings 248: 111214. doi:https://doi.org/10.1016/j.enbuild.2021.111214.
- Han, Yilong, and John E. Taylor. 2016. “Simulating the Inter-Building Effect on Energy Consumption from Embedding Phase Change Materials in Building Envelopes.” Sustainable Cities and Society 27: 287–295. doi:https://doi.org/10.1016/j.scs.2016.03.001.
- Hichem, Necib, Settou Noureddine, Saifi Nadia, and Damene Djamila. 2013. “Experimental and Numerical Study of a Usual Brick Filled with PCM to Improve the Thermal Inertia of Buildings.” Energy Procedia 36: 766–775. doi:https://doi.org/10.1016/j.egypro.2013.07.089.
- Hu, Yue, and Per Kvols Heiselberg. 2018. “A new Ventilated Window with PCM Heat Exchanger—Performance Analysis and Design Optimization.” Energy and Buildings 169: 185–194. doi:https://doi.org/10.1016/j.enbuild.2018.03.060.
- Hu, Yue, Per Kvols Heiselberg, Hicham Johra, and Rui Guo. 2020. “Experimental and Numerical Study of a PCM Solar air Heat Exchanger and its Ventilation Preheating Effectiveness.” Renewable Energy 145: 106–115. doi:https://doi.org/10.1016/j.renene.2019.05.115.
- Hu, Jianying, and Xiong Yu. 2020. “Adaptive Building Roof by Coupling Thermochromic Material and Phase Change Material: Energy Performance Under Different Climate Conditions.” Construction and Building Materials 262: 120481. doi:https://doi.org/10.1016/j.conbuildmat.2020.120481.
- Itani, Mariam, Dalia Ghaddar, Nesreen Ghaddar, and Kamel Ghali. 2021. “Model-based Multivariable Regression Model for Thermal Comfort in Naturally Ventilated Spaces with Personalized Ventilation.” Journal of Building Performance Simulation 14 (1): 78–93. doi:https://doi.org/10.1080/19401493.2020.1850865.
- Jamil, Hasnat, Morshed Alam, Jay Sanjayan, and John Wilson. 2016. “Investigation of PCM as Retrofitting Option to Enhance Occupant Thermal Comfort in a Modern Residential Building.” Energy and Buildings 133: 217–229. doi:https://doi.org/10.1016/j.enbuild.2016.09.064.
- Jeon, Jisoo, Ji Hun Park, Seunghwan Wi, Sungwoong Yang, Yong Sik Ok, and Sumin Kim. 2019. “Latent Heat Storage Biocomposites of Phase Change Material-Biochar as Feasible eco-Friendly Building Materials.” Environmental Research 172: 637–648. doi:https://doi.org/10.1016/j.envres.2019.01.058.
- Jimenez-Bescos, Carlos. 2017. “An Evaluation on the Effect of Night Ventilation on Thermal Mass to Reduce Overheating in Future Climate Scenarios.” Energy Procedia 122: 1045–1050. doi:https://doi.org/10.1016/j.egypro.2017.07.476.
- Jindal, Aradhana. 2019. “Investigation and Analysis of Thermal Comfort in Naturally Ventilated Secondary School Classrooms in the Composite Climate of India.” Architectural Science Review 62 (6): 466–484. doi:https://doi.org/10.1080/00038628.2019.1653818.
- Karaoulis, A. 2017. “Investigation of Energy Performance in Conventional and Lightweight Building Components with the use of Phase Change Materials (PCMS): Energy Savings in Summer Season.” Procedia Environmental Sciences 38: 796–803. doi:https://doi.org/10.1016/j.proenv.2017.03.164.
- Kenzhekhanov, Sultan, Shazim Ali Memon, and Indira Adilkhanova. 2020. “Quantitative Evaluation of Thermal Performance and Energy Saving Potential of the Building Integrated with PCM in a Subarctic Climate.” Energy 192: 116607. doi:https://doi.org/10.1016/j.energy.2019.116607.
- Kheradmand, Mohammad, Miguel Azenha, José L. B. de Aguiar, and João Castro-Gomes. 2016. “Experimental and Numerical Studies of Hybrid PCM Embedded in Plastering Mortar for Enhanced Thermal Behaviour of Buildings.” Energy 94: 250–261. doi:https://doi.org/10.1016/j.energy.2015.10.131.
- Kosny, Jan. 2015. “PCM-Enhanced Building Components, An Application of Phase Change Materials in Building Envelopes and Internal Structures”.
- Kosny, Jan, Elizabeth Kossecka, Andrzej Brzezinski, Akhan Tleoubaev, and David Yarbrough. 2012. “Dynamic Thermal Performance Analysis of Fiber Insulations Containing bio-Based Phase Change Materials (PCMs).” Energy and Buildings 52: 122–131. doi:https://doi.org/10.1016/j.enbuild.2012.05.021.
- Laaouatni, Amine, Nadia Martaj, Rachid Bennacer, Mohammed Lachi, Mohamed El Omari, and Mohammed El Ganaoui. 2019. “Thermal Building Control Using Active Ventilated Block Integrating Phase Change Material.” Energy and Buildings 187: 50–63. doi:https://doi.org/10.1016/j.enbuild.2019.01.024.
- Lachheb, Mohamed, Zohir Younsi, Hassane Naji, Mustapha Karkri, and Sassi Ben Nasrallah. 2017. “Thermal Behavior of a Hybrid PCM/Plaster: A Numerical and Experimental Investigation.” Applied Thermal Engineering 111: 49–59. doi:https://doi.org/10.1016/j.applthermaleng.2016.09.083.
- Lai, Chi-ming, and Shuichi Hokoi. 2014. “Thermal Performance of an Aluminum Honeycomb Wallboard Incorporating Microencapsulated PCM.” Energy and Buildings 73: 37–47. doi:https://doi.org/10.1016/j.enbuild.2014.01.017.
- Lee, Kyoung Ok, Mario A. Medina, Xiaoqin Sun, and Xing Jin. 2018. “Thermal Performance of Phase Change Materials (PCM)-Enhanced Cellulose Insulation in Passive Solar Residential Building Walls.” Solar Energy 163: 113–121. doi:https://doi.org/10.1016/j.solener.2018.01.086.
- Li, Wei, and Wei Chen. 2019. “Numerical Analysis on the Thermal Performance of a Novel PCM-Encapsulated Porous Heat Storage Trombe-Wall System.” Solar Energy 188: 706–719. doi:https://doi.org/10.1016/j.solener.2019.06.052.
- Li, Yilin, Jo Darkwa, and Georgios Kokogiannakis. 2017. “Heat Transfer Analysis of an Integrated Double Skin Façade and Phase Change Material Blind System.” Building and Environment 125: 111–121. doi:https://doi.org/10.1016/j.buildenv.2017.08.034.
- Li, Yongcai, Shuli Liu, and Jun Lu. 2017. “Effects of Various Parameters of a PCM on Thermal Performance of a Solar Chimney.” Applied Thermal Engineering 127: 1119–1131. doi:https://doi.org/10.1016/j.applthermaleng.2017.08.087.
- Li, Chaoen, Hang Yu, Yuan Song, and Zhiyuan Liu. 2019. “Novel Hybrid Microencapsulated Phase Change Materials Incorporated Wallboard for Year-Long Year Energy Storage in Buildings.” Energy Conversion and Management 183: 791–802. doi:https://doi.org/10.1016/j.enconman.2019.01.036.
- Li, Gang, and Xuefei Zheng. 2016. “Thermal Energy Storage System Integration Forms for a Sustainable Future.” Renewable and Sustainable Energy Reviews 62: 736–757. doi:https://doi.org/10.1016/j.rser.2016.04.076.
- Li, Dong, Yumeng Zheng, Changyu Liu, and Guozhong Wu. 2015. “Numerical Analysis on Thermal Performance of Roof Contained PCM of a Single Residential Building.” Energy Conversion and Management 100: 147–156. doi:https://doi.org/10.1016/j.enconman.2015.05.014.
- Li, Shuhong, Kecheng Zhong, Yingying Zhou, and Xiaosong Zhang. 2014. “Comparative Study on the Dynamic Heat Transfer Characteristics of PCM-Filled Glass Window and Hollow Glass Window.” Energy and Buildings 85: 483–492. doi:https://doi.org/10.1016/j.enbuild.2014.09.054.
- Li, Shanshan, Na Zhu, Pingfang Hu, Fei Lei, and Renjie Deng. 2019. “Numerical Study on Thermal Performance of PCM Trombe Wall.” Energy Procedia 158: 2441–2447. doi:https://doi.org/10.1016/j.egypro.2019.01.317.
- Li, Shuhong, Kaikai Zou, Gaofeng Sun, and Xiaosong Zhang. 2018. “Simulation Research on the Dynamic Thermal Performance of a Novel Triple-Glazed Window Filled with PCM.” Sustainable Cities and Society 40: 266–273. doi:https://doi.org/10.1016/j.scs.2018.01.020.
- Liu, Jiang, Yan Liu, Liu Yang, Tang Liu, Chen Zhang, and Hong Dong. 2020. “Climatic and Seasonal Suitability of Phase Change Materials Coupled with Night Ventilation for Office Buildings in Western China.” Renewable Energy 147: 356–373. doi:https://doi.org/10.1016/j.renene.2019.08.069.
- López-Cabeza, V. P., F. J. Carmona-Molero, S. Rubino, C. Rivera-Gómez, E. D. Fernández-Nieto, C. Galán-Marín, and T. Chacón-Rebollo. 2021. “Modelling of Surface and Inner Wall Temperatures in the Analysis of Courtyard Thermal Performances in Mediterranean Climates.” Journal of Building Performance Simulation 14 (2): 181–202. doi:https://doi.org/10.1080/19401493.2020.1870561.
- Lu, Shilei, Bowen Xu, and Xiaolei Tang. 2020. “Experimental Study on Double Pipe PCM Floor Heating System Under Different Operation Strategies.” Renewable Energy 145: 1280–1291. doi:https://doi.org/10.1016/j.renene.2019.06.086.
- Mankel, Christoph, Antonio Caggiano, and Eddie Koenders. 2019. “Thermal Energy Storage Characterization of Cementitious Composites Made with Recycled Brick Aggregates Containing PCM.” Energy and Buildings 202: 109395. doi:https://doi.org/10.1016/j.enbuild.2019.109395.
- Marani, Afshin, and Morteza Madhkhan. 2018. “An Innovative Apparatus for Simulating Daily Temperature for Investigating Thermal Performance of Wallboards Incorporating PCMs.” Energy and Buildings 167: 1–7. doi:https://doi.org/10.1016/j.enbuild.2018.02.029.
- Marani, Afshin, and Moncef L. Nehdi. 2019. “Integrating Phase Change Materials in Construction Materials: Critical Review.” Construction and Building Materials 217: 36–49. doi:https://doi.org/10.1016/j.conbuildmat.2019.05.064.
- Mazzeo, Domenico, Nicoletta Matera, Cristina Cornaro, Giuseppe Oliveti, Piercarlo Romagnoni, and Livio De Santoli. 2020. “EnergyPlus, IDA ICE and TRNSYS Predictive Simulation Accuracy for Building Thermal Behaviour Evaluation by Using an Experimental Campaign in Solar Test Boxes with and Without a PCM Module.” Energy and Buildings 212: 109812. doi:https://doi.org/10.1016/j.enbuild.2020.109812.
- Mi, Xuming, Ran Liu, Hongzhi Cui, Shazim Ali Memon, Feng Xing, and Yiu Lo. 2016. “Energy and Economic Analysis of Building Integrated with PCM in Different Cities of China.” Applied Energy 175: 324–336. doi:https://doi.org/10.1016/j.apenergy.2016.05.032.
- Mohseni, Ehsan, and Waiching Tang. 2021. “Parametric Analysis and Optimisation of Energy Efficiency of a Lightweight Building Integrated with Different Configurations and Types of PCM.” Renewable Energy 168: 865–877. doi:https://doi.org/10.1016/j.renene.2020.12.112.
- Nada, S. A., D. H. El-Nagar, and H. M. S. Hussein. 2018. “Improving the Thermal Regulation and Efficiency Enhancement of PCM-Integrated PV Modules Using Nano Particles.” Energy Conversion and Management 166: 735–743. doi:https://doi.org/10.1016/j.enconman.2018.04.035.
- Navarro, Lidia, Alvaro de Gracia, Albert Castell, Servando Álvarez, and Luisa F. Cabeza. 2014. “Design of a Prefabricated Concrete Slab with PCM Inside the Hollows.” Energy Procedia 57, doi:https://doi.org/10.1016/j.egypro.2014.10.240.
- Navarro, Lidia, Alvaro de Gracia, Albert Castell, Servando Álvarez, and Luisa F. Cabeza. 2015. “PCM Incorporation in a Concrete Core Slab as a Thermal Storage and Supply System: Proof of Concept.” Energy and Buildings 103: 70–82. doi:https://doi.org/10.1016/j.enbuild.2015.06.028.
- Nouira, Meriem, and Habib Sammouda. 2018. “Numerical Study of an Inclined Photovoltaic System Coupled with Phase Change Material Under Various Operating Conditions.” Applied Thermal Engineering 141: 958–975. doi:https://doi.org/10.1016/j.applthermaleng.2018.06.039.
- Park, Ji Hun, Umberto Berardi, Seong Jin Chang, Seunghwan Wi, Yujin Kang, and Sumin Kim. 2021. “Energy Retrofit of PCM-Applied Apartment Buildings Considering Building Orientation and Height.” Energy 119877, doi:https://doi.org/10.1016/j.energy.2021.119877.
- Park, Ji Hun, Jisoo Jeon, Jongki Lee, Seunghwan Wi, Beom Yeol Yun, and Sumin Kim. 2019. “Comparative Analysis of the PCM Application According to the Building Type as Retrofit System.” Building and Environment 151: 291–302. doi:https://doi.org/10.1016/j.buildenv.2019.01.048.
- Pasupathy, A., and R. Velraj. 2008. “Effect of Double Layer Phase Change Material in Building Roof for Year Round Thermal Management.” Energy and Buildings 40 (3): 193–203. doi:https://doi.org/10.1016/j.enbuild.2007.02.016.
- Pedersen, Curtis O. 2007. “Advanced zone simulation in EnergyPlus: incorporation of variable properties and phase change material (PCM) capability.” Paper presented at the Proceedings of building simulation.
- Piselli, Cristina, Mohit Prabhakar, Alvaro de Gracia, Mohammad Saffari, Anna Laura Pisello, and Luisa F. Cabeza. 2020. “Optimal Control of Natural Ventilation as Passive Cooling Strategy for Improving the Energy Performance of Building Envelope with PCM Integration.” Renewable Energy 162: 171–181. doi:https://doi.org/10.1016/j.renene.2020.07.043.
- Prabhakar, Mohit, Mohammad Saffari, Alvaro de Gracia, and Luisa F. Cabeza. 2020. “Improving the Energy Efficiency of Passive PCM System Using Controlled Natural Ventilation.” Energy and Buildings 228: 110483. doi:https://doi.org/10.1016/j.enbuild.2020.110483.
- Putra, Jouvan Chandra Pratama. 2017. “A Study of Thermal Comfort and Occupant Satisfaction in Office Room.” Procedia Engineering 170: 240–247. doi:https://doi.org/10.1016/j.proeng.2017.03.057.
- Rahimpour, Zahra, Alice Faccani, Donald Azuatalam, Archie Chapman, and Gregor Verbič. 2017. “Using Thermal Inertia of Buildings with Phase Change Material for Demand Response.” Energy Procedia 121: 102–109. doi:https://doi.org/10.1016/j.egypro.2017.07.483.
- Ramakrishnan, Sayanthan, Xiaoming Wang, Morshed Alam, Jay Sanjayan, and John Wilson. 2016. “Parametric Analysis for Performance Enhancement of Phase Change Materials in Naturally Ventilated Buildings.” Energy and Buildings 124: 35–45. doi:https://doi.org/10.1016/j.enbuild.2016.04.065.
- Roman, Kibria K., Timothy O'Brien, Jedediah B. Alvey, and OhJin Woo. 2016. “Simulating the Effects of Cool Roof and PCM (Phase Change Materials) Based Roof to Mitigate UHI (Urban Heat Island) in Prominent US Cities.” Energy 96: 103–117. doi:https://doi.org/10.1016/j.energy.2015.11.082.
- Royon, Laurent, Laurie Karim, and André Bontemps. 2013. “Thermal Energy Storage and Release of a new Component with PCM for Integration in Floors for Thermal Management of Buildings.” Energy and Buildings 63: 29–35. doi:https://doi.org/10.1016/j.enbuild.2013.03.042.
- Royon, L., L. Karim, and A. Bontemps. 2014. “Optimization of PCM Embedded in a Floor Panel Developed for Thermal Management of the Lightweight Envelope of Buildings.” Energy and Buildings 82: 385–390. doi:https://doi.org/10.1016/j.enbuild.2014.07.012.
- Saman, W., F. Bruno, and E. Halawa. 2005. “Thermal Performance of PCM Thermal Storage Unit for a Roof Integrated Solar Heating System.” Solar Energy 78 (2): 341–349. doi:https://doi.org/10.1016/j.solener.2004.08.017.
- Sasic Kalagasidis, Angela. 2014. “A Multi-Level Modelling and Evaluation of Thermal Performance of Phase-Change Materials in Buildings.” Journal of Building Performance Simulation 7 (4): 289–308. doi:https://doi.org/10.1080/19401493.2013.764547.
- Saxena, Rajat, Dibakar Rakshit, and S. C. Kaushik. 2019. “Phase Change Material (PCM) Incorporated Bricks for Energy Conservation in Composite Climate: A Sustainable Building Solution.” Solar Energy 183: 276–284. doi:https://doi.org/10.1016/j.solener.2019.03.035.
- Sfakianaki, Aikaterini, Elli Pagalou, Konstantinos Pavlou, Mat Santamouris, and M. N. Assimakopoulos. 2009. “Theoretical and Experimental Analysis of the Thermal Behaviour of a Green Roof System Installed in two Residential Buildings in Athens, Greece.” International Journal of Energy Research 33 (12): 1059–1069. doi:https://doi.org/10.1002/er.1535.
- Shadnia, Rasoul, Lianyang Zhang, and Peiwen Li. 2015. “Experimental Study of Geopolymer Mortar with Incorporated PCM.” Construction and Building Materials 84: 95–102. doi:https://doi.org/10.1016/j.conbuildmat.2015.03.066.
- Shahda, Merhan M. 2020. “Self-Shading Walls to Improve Environmental Performance in Desert Buildings”.
- Sharifi, Naser P, Ahsan Aadil Nizam Shaikh, and Aaron R. Sakulich. 2017. “Application of Phase Change Materials in Gypsum Boards to Meet Building Energy Conservation Goals.” Energy and Buildings 138: 455–467. doi:https://doi.org/10.1016/j.enbuild.2016.12.046.
- Sheeja, R., S. Kumar, P. Chandrasekar, Abraham J. S. Jospher, and Sai Krishnan. 2020. “Numerical Analysis of Energy Savings due to the use of PCM Integrated in Lightweight Building Walls.” IOP Conference Series: Materials Science and Engineering 923: 012070. doi:https://doi.org/10.1088/1757-899x/923/1/012070.
- Silva, Tiago, Romeu Vicente, Fernanda Rodrigues, António Samagaio, and Claudino Cardoso. 2015. “Development of a Window Shutter with Phase Change Materials: Full Scale Outdoor Experimental Approach.” Energy and Buildings 88: 110–121. doi:https://doi.org/10.1016/j.enbuild.2014.11.053.
- Silva, Tiago, Romeu Vicente, Nelson Soares, and Victor Ferreira. 2012. “Experimental Testing and Numerical Modelling of Masonry Wall Solution with PCM Incorporation: A Passive Construction Solution.” Energy and Buildings 49: 235–245. doi:https://doi.org/10.1016/j.enbuild.2012.02.010.
- Soares, Nelson. 2015. “Thermal energy storage with phase change materials (PCMs) for the improvement of the energy performance of buildings”.
- Soares, Nelson, Christoph F. Reinhart, and Ali Hajiah. 2017. “Simulation-based Analysis of the use of PCM-Wallboards to Reduce Cooling Energy Demand and Peak-Loads in low-Rise Residential Heavyweight Buildings in Kuwait.” Building Simulation 10 (4): 481–495. doi:https://doi.org/10.1007/s12273-017-0347-2.
- Solgi, Ebrahim, Zahra Hamedani, Ruwan Fernando, and Behrouz Mohammad Kari. 2019. “A Parametric Study of Phase Change Material Characteristics When Coupled with Thermal Insulation for Different Australian Climatic Zones.” Building and Environment 163: 106317. doi:https://doi.org/10.1016/j.buildenv.2019.106317.
- Solgi, Ebrahim, Zahra Hamedani, Ruwan Fernando, Behrouz Mohammad Kari, and Henry Skates. 2019. “A Parametric Study of Phase Change Material Behaviour When Used with Night Ventilation in Different Climatic Zones.” Building and Environment 147: 327–336. doi:https://doi.org/10.1016/j.buildenv.2018.10.031.
- Solgi, Ebrahim, Behrouz Mohammad Kari, Rima Fayaz, and Helia Taheri. 2017. “The Impact of Phase Change Materials Assisted Night Purge Ventilation on the Indoor Thermal Conditions of Office Buildings in hot-Arid Climates.” Energy and Buildings 150: 488–497. doi:https://doi.org/10.1016/j.enbuild.2017.06.035.
- Solution, PHASECHANGE. n.d. “Brands & Product.” Accessed 30 January 2021. https://phasechange.com/biopcm/.
- Song, Mengjie, Fuxin Niu, Ning Mao, Yanxin Hu, and Shiming Deng. 2018. “Review on Building Energy Performance Improvement Using Phase Change Materials.” Energy and Buildings 158: 776–793. doi:https://doi.org/10.1016/j.enbuild.2017.10.066.
- Soudian, Shahrzad, and Umberto Berardi. 2019. “Assessing the Effect of Night Ventilation on PCM Performance in High-Rise Residential Buildings.” Journal of Building Physics 43 (3): 229–249. doi:https://doi.org/10.1177/1744259119848128.
- Sovetova, Meruyert, Shazim Ali Memon, and Jong Kim. 2019. “Thermal Performance and Energy Efficiency of Building Integrated with PCMs in hot Desert Climate Region.” Solar Energy 189: 357–371. doi:https://doi.org/10.1016/j.solener.2019.07.067.
- Spentzou, Eftychia, Malcolm J. Cook, and Stephen Emmitt. 2018. “Natural Ventilation Strategies for Indoor Thermal Comfort in Mediterranean Apartments.” Building Simulation 11 (1): 175–191. doi:https://doi.org/10.1007/s12273-017-0380-1.
- Stritih, U., V. V. Tyagi, R. Stropnik, H. Paksoy, F. Haghighat, and M. Mastani Joybari. 2018. “Integration of Passive PCM Technologies for net-Zero Energy Buildings.” Sustainable Cities and Society 41: 286–295. doi:https://doi.org/10.1016/j.scs.2018.04.036.
- Stropnik, Rok, and Uroš Stritih. 2016. “Increasing the Efficiency of PV Panel with the use of PCM.” Renewable Energy 97: 671–679. doi:https://doi.org/10.1016/j.renene.2016.06.011.
- Tabares-Velasco, Paulo Cesar, Craig Christensen, and Marcus Bianchi. 2012. “Verification and Validation of EnergyPlus Phase Change Material Model for Opaque Wall Assemblies.” Building and Environment 54: 186–196. doi:https://doi.org/10.1016/j.buildenv.2012.02.019.
- van Hoof, J. 2008. “Forty Years of Fanger's Model of Thermal Comfort: Comfort for all?” Indoor air 18 (3): 182–201. doi:https://doi.org/10.1111/j.1600-0668.2007.00516.x.
- Walsh, Brendan P., Sean N. Murray, and D. T. J. O'Sullivan. 2013. “Free-cooling Thermal Energy Storage Using Phase Change Materials in an Evaporative Cooling System.” Applied Thermal Engineering 59 (1): 618–626. doi:https://doi.org/10.1016/j.applthermaleng.2013.06.008.
- Wang, Huakeer, Wei Lu, Zhigen Wu, and Guanhua Zhang. 2020. “Parametric Analysis of Applying PCM Wallboards for Energy Saving in High-Rise Lightweight Buildings in Shanghai.” Renewable Energy 145: 52–64. doi:https://doi.org/10.1016/j.renene.2019.05.124.
- Weather-Atlas. n.d. Accessed 30 January 2021. https://www.weather-atlas.com/en/egypt/port-said-climate.
- Wi, Seunghwan, Seong Jin Chang, and Sumin Kim. 2020. “Improvement of Thermal Inertia Effect in Buildings Using Shape Stabilized PCM Wallboard Based on the Enthalpy-Temperature Function.” Sustainable Cities and Society, 102067. doi:https://doi.org/10.1016/j.scs.2020.102067.
- Wijesuriya, Sajith, Paulo Cesar Tabares-Velasco, Kaushik Biswas, and Dariusz Heim. 2020. “Empirical Validation and Comparison of PCM Modeling Algorithms Commonly Used in Building Energy and Hygrothermal Software.” Building and Environment 173: 106750. doi:https://doi.org/10.1016/j.buildenv.2020.106750.
- Xie, Jingchao, Wei Wang, Jiaping Liu, and Song Pan. 2018. “Thermal Performance Analysis of PCM Wallboards for Building Application Based on Numerical Simulation.” Solar Energy 162: 533–540. doi:https://doi.org/10.1016/j.solener.2018.01.069.
- Yang, Liu, Rong Fu, Wenfang He, Quan He, and Yan Liu. 2020. “Adaptive Thermal Comfort and Climate Responsive Building Design Strategies in dry–hot and dry–Cold Areas: Case Study in Turpan, China.” Energy and Buildings 209: 109678. doi:https://doi.org/10.1016/j.enbuild.2019.109678.
- Yao, Jian, David Hou Chi Chow, Rong-Yue Zheng, and Cheng-Wen Yan. 2016. “Occupants’ Impact on Indoor Thermal Comfort: A co-Simulation Study on Stochastic Control of Solar Shades.” Journal of Building Performance Simulation 9 (3): 272–287. doi:https://doi.org/10.1080/19401493.2015.1046492.
- Yao, Chengqiang, Xiangfei Kong, Yantong Li, Yaxing Du, and Chengying Qi. 2018. “Numerical and Experimental Research of Cold Storage for a Novel Expanded Perlite-Based Shape-Stabilized Phase Change Material Wallboard Used in Building.” Energy Conversion and Management 155: 20–31. doi:https://doi.org/10.1016/j.enconman.2017.10.052.
- Yasin, Modar, Eva Scheidemantel, Felix Klinker, Helmut Weinläder, and Stephan Weismann. 2019. “Generation of a Simulation Model for Chilled PCM Ceilings in TRNSYS and Validation with Real Scale Building Data.” Journal of Building Engineering 22: 372–382. doi:https://doi.org/10.1016/j.jobe.2019.01.004.
- Yeon, Jung Heum. 2020. “Thermal Behavior of Cement Mortar Embedded with low-Phase Transition Temperature PCM.” Construction and Building Materials 252: 119168. doi:https://doi.org/10.1016/j.conbuildmat.2020.119168.
- Zhou, Dan, and Philip Eames. 2019. “Phase Change Material Wallboard (PCMW) Melting Temperature Optimisation for Passive Indoor Temperature Control.” Renewable Energy 139: 507–514. doi:https://doi.org/10.1016/j.renene.2019.02.109.
- Zhou, Guobing, and Jing He. 2015. “Thermal Performance of a Radiant Floor Heating System with Different Heat Storage Materials and Heating Pipes.” Applied Energy 138: 648–660. doi:https://doi.org/10.1016/j.apenergy.2014.10.058.
- Zhou, D., C. Y. Zhao, and Y. Tian. 2012. “Review on Thermal Energy Storage with Phase Change Materials (PCMs) in Building Applications.” Applied Energy 92: 593–605. doi:https://doi.org/10.1016/j.apenergy.2011.08.025.
- Zhu, Na, Fuli Liu, Pengpeng Liu, Pingfang Hu, and Mengdu Wu. 2016. “Energy Saving Potential of a Novel Phase Change Material Wallboard in Typical Climate Regions of China.” Energy and Buildings 128: 360–369. doi:https://doi.org/10.1016/j.enbuild.2016.06.093.
- Zhu, Li, Yang Yang, Sarula Chen, and Yong Sun. 2018. “Numerical Study on the Thermal Performance of Lightweight Temporary Building Integrated with Phase Change Materials.” Applied Thermal Engineering 138: 35–47. doi:https://doi.org/10.1016/j.applthermaleng.2018.03.103.
- Zhuang, Chun-long, An-zhong Deng, Yong Chen, Sheng-bo Li, Hong-yu Zhang, and Guo-zhi Fan. 2010. “Validation of Veracity on Simulating the Indoor Temperature in PCM Light Weight Building by EnergyPlus.” Paper Presented at the Life System Modeling and Intelligent Computing, Berlin, Heidelberg, 2010.
- Zwanzig, Stephen D., Yongsheng Lian, and Ellen G. Brehob. 2013. “Numerical Simulation of Phase Change Material Composite Wallboard in a Multi-Layered Building Envelope.” Energy Conversion and Management 69: 27–40. doi:https://doi.org/10.1016/j.enconman.2013.02.003.