Publication Cover
Canadian Metallurgical Quarterly
The Canadian Journal of Metallurgy and Materials Science
Volume 54, 2015 - Issue 4
138
Views
1
CrossRef citations to date
0
Altmetric
Mineral Processing

Modelling and simulation of vacuum filtration of ore slurry: a case study on limestone-hosted Indian uranium ore

, &
Pages 406-414 | Received 18 Jan 2015, Accepted 22 Sep 2015, Published online: 19 Jan 2016

References

  • A. Adamantiades and I. Kessides: ‘Nuclear power for sustainable development: current status and future prospects’, Energy Policy, 2009, 37, (12), 5149–5166. doi: 10.1016/j.enpol.2009.07.052
  • T. Sreenivas, K. C. Rajan and J. K. Chakravartty: ‘Application of resin in pulp technique for ion exchange separation of uranium from alkaline leachate’, Paper presented at URAM, IAEA, Vienna, 2014, IAEA-CN-216–014.
  • Anon: ‘Uranium extraction technology, IAEA Technical Report Series No. 359’, IAEA, Vienna, Austria, 1993, 137.
  • R. C. Merritt: ‘The extractive metallurgy of uranium’, 50–70; 1971, Boulder, CO, Colorado School of Mines, Johnson Publishing Co.
  • Anon: ‘Manual on laboratory testing of uranium ore processing. Technical Reports Series No. 313’. International Atomic Energy Agency, Vienna, 1990, 48–60.
  • L. Svarovsky, ‘Solid liquid separation’ in ‘Butterworths monographs in chemistry and chemical engineering’, (ed. L.Svarovsky), 242–249; 1981, London, Butterworth and Co Publishers Ltd.
  • Stanley M. Walas: ‘Chemical process equipment, selection and design, Butterworth, Heinemann series’ in ‘Chemical engineering’, (ed. Howard Brenner), 305–334; 1990, Boston, Butterworth-Heinemann, A Division of Reed Publishing (USA) Inc.
  • S. K. Jain: ‘Inevitability of nuclear power in the Asian region’, J. Nucl. Power, 2011, 24 (3–4), 55–65.
  • S. Banerjee: ‘BARC Newsletter’, 2011, 32, 6–9. http://www.dae.gov.indin2010.html. (accessed 28.02.14).
  • A. Chaki: ‘Uranium occurrences and exploration experience in India’, in ‘Proc. of the 3rd Int. Conf. on Uranium’, (ed. E.K.Lan, et al.), Vol. 1, 25–34; 2010, Canada, Metsoc, Saskatoon.
  • R. Gupta and A. K. Sarangi: ‘Overview of Indian uranium production scenario in coming decades’, Energy Proced., 2011, 7, 146–152. doi: 10.1016/j.egypro.2011.06.019
  • A. Chaki, A. Panneerselvam and S. J. Chavan: ‘Uranium exploration in the upper Proterozoic Bhima basin, Karnataka, India: a new target area’, in ‘Proc. of Int. Symp. on ‘Uranium Production and Raw Materials for the Nuclear Fuel Cycle, Supply and Demand, Economics, the Environment and Energy Security’’, 183–194; 2005, Vienna, International Atomic Energy Agency (IAEA), (IAEA-CN-128).
  • A. K. Suri, N. P. H. Padmanabhan, T. Sreenivas, K. Anand Rao, A. K. Singh, K. T. Shenoy, T. Mishra and S. K. Ghosh: ‘Process development studies for low-grade uranium deposit in alkaline host rocks of Tummalapalle’, in ‘Proc. IAEA Tech. Meeting on Low-grade Uranium Deposits at Vienna’, 29–31; 2010, Vienna, Austria, International Atomic Energy Agency.
  • A. K. Suri, T. Sreenivas, K. Anand Rao, K. C. Rajan, K. Srinivas, A. K. Singh, K. T. Shenoy, T. Mishra, N. P. H. Padmanabhan and S. K. Ghosh: ‘Process development studies for the recovery of uranium and sodium sulphate from a low grade dolo stone hosted strata bound type uranium ore deposit’, Min. Process. Extract. Metall., 2014, 123, (2), 104–115. doi:10.1179/1743285514Y.0000000054
  • G. Ramadevi, T. Sreenivas, A. S. Navale and N. P. H. Padmanabhan: ‘Solvent extraction of uranium from lean grade acidic sulfate leach liquor with alamine 336 reagent’, J. Radioanal. Nucl. Chem., 2012, 294, 13–18. doi: 10.1007/s10967-011-1507-y
  • K. Mirjalili and M. Roshani: ‘Resin-in-pulp method for uranium recovery from leached pulp of low-grade uranium ore’, Hydrometallurgy, 2007, 85, 103–109. doi: 10.1016/j.hydromet.2006.08.006
  • Y. Ling, N. Durupt and N. Banton: ‘RIP studies at AREVA: R & D and applications for Niger and Canada projects’, in ‘Proc. of the 3rd Int. Conf. on Uranium’, (eds. E. K. Lan, J. W. Rawson, E. Ozberk), Vol. II, 27–38; 2010, Canada, Metsoc, Saskatoon.
  • A. K. Sarangi: ‘Development of carbonate hosted uranium mineralization in India’. Paper presented at URAM, IAEA, Vienna, 2014, IAEA-CN-216–212.
  • D. Van Tonder: ‘Comparison of resin-in-pulp and direct precipitation for recovery of uranium in alkaline leach circuits’, CIM, 2012, 3, (2), 131–139.
  • T. Sreenivas and K. C. Rajan: ‘Studies on the separation of dissolved uranium from alkaline carbonate leach slurries by resin-in-pulp process’, Separ. Purif. Technol., 2013, 112, 54–60. doi: 10.1016/j.seppur.2013.03.050
  • Anand Rao Kacham and A. K. Suri: ‘Application of a topochemical reaction model to predict leaching behavior of high carbonate uranium ores in alkaline solutions: an experimental case study’, Hydrometallurgy, 2014, 141, 67–75. doi: 10.1016/j.hydromet.2013.10.005
  • A. K. Suri: ‘Uranium processing – a new alkaline route’, Trans. Ind. Inst. Met., 2008, 61, (1), 1–6. doi: 10.1007/s12666-008-0057-7
  • S. C. Amarante, A. C. Araujo, G. E. S. Valadao and A. E. C. Peres: ‘Cake dewatering of some iron ore industrial products’, Min. Metall. Process., 2002, 19, (3), 161–164.
  • L. Besra, B. P. Singh, P. S. R. Reddy, D. K. Sengupta and S. K. Bhoumik: ‘Effect of flocculant on settling and filtration of iron-ore sludge’, Min. Metall. Process., 1996, 13 (2), 402–406.
  • L. Besra, B. P. Singh, P. S. R. Reddy and D. K. Sengupta: ‘Influence of surfactants on filter cake parameters during vacuum filtration of flocculated iron ore sludge’, Powder Technol., 1998, 96, 240–247. doi: 10.1016/S0032-5910(97)03379-2
  • G. E. S. Valadao, A. E. C. Peres and R. V. G. Silva: ‘Development of empirical models for the filtration of pellet feed’, in ‘Proc. of the XX Int. Miner’, 83–90; 1997, Aachen, Process. Cong., IMPC.
  • R. G. Holdich: ‘Rotary vacuum filter scale-up calculations – and the use of computer spreadsheets’, Filtrat. Separat., 1990, 27, (6), 435–439. doi: 10.1016/0015-1882(90)80538-V
  • D. Mihoubi, J. Vaxelaire, F. Zagrouba and A. Bellagi: ‘Mechanical dewatering of suspension’, Desalination, 2003, 158, 259–265. doi: 10.1016/S0011-9164(03)00461-2
  • A. Rushton, A. S. Ward and R. G. Holdich, ‘Solid-liquid filtration and separation technology’, 33; 1996, Germany, VCH, Weinheim.
  • R. G. Holdich: ‘Solid–liquid separation equipment selection and modelling’, Miner. Eng., 2003, 16, 75–83. doi: 10.1016/S0892-6875(02)00178-4
  • I. N. Bhattacharya: ‘Settling and filtration characteristics of fine alumina trihydrate slurry’, Int. J. Miner. Process.,1997, 49, 107–118. doi: 10.1016/S0301-7516(96)00032-4
  • Md. Serajuddin and T. Sreenivas: ‘Optimization studies on flocculant aided filtration of very-fine grained alkaline leach slurry using central composite rotatable design’, Adv. Mater. Res., 2014, 828, 21–32. doi:10.4028/www.scientific.net/AMR.828.21
  • R. E. Finch and R. H. Scala: ‘ Carbonate leach uranium ore processing with sodium polyacrylate flocculant’, U.S. Patent, 4024216, 1977.
  • T. K. Rout, L. Besra, B. P. Singh, A. R. Prasad, P. S. R. Reddy and D. K. Sengupta: ‘Improved dewatering characteristics of uranium industry leach pulp using flocculants and surfactants’, Miner. Metal. Process., 2001, 18, (1), 54–60.
  • H. L. Ford, N. M. Levine and A. R. Risdon: ‘ Filtration aids in uranium ore processing’, U.S. Patent, 3932276, 1976.
  • Md. Serajuddin and T. Sreenivas: ‘Application of response surface method of optimization in flocculant assisted filtration of uranium bearing alkaline leach slurry of limestone origin’, Min. Process. Extract. Metall., 2015, Accepted manuscript. Accepted 06 March 2015, doi:10.1179/1743285515Y.0000000003.
  • S. P. Usher, R. G. de Kretser and P. J. Scales: ‘Validation of a new filtration technique for dewaterability characterization’, AIChE J., 2001, 47, (7), 1561–1570. doi: 10.1002/aic.690470709

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.