Preparation of metallic iron powder from copper slag by carbothermic reduction and magnetic separation

References

• X. L. Sun, B. Z. Chen, X. Y. Yang and Y. Y. Liu: ‘Technological conditions and kinetics of leaching copper from complex copper oxide ore’, J. Cent. South Univ., 2009, 16, (2), 926–941.
   Google Scholar
• K. Zhao, X. L. Cheng and Y. H. Qi: ‘Analysis of copper slag treatment process and new technology of comprehensive utilization’, China Nonferrous Metall., 2012, 1, 56–60. (in Chinese)
   Google Scholar
• B. Gorai and R. K. Jana Premchand: ‘Characteristics and utilisation of copper slag-a review’, Resour. Conserv. Recycl., 2003, 39, 299–313. doi: 10.1016/S0921-3449(02)00171-4
   Web of Science ®Google Scholar
• D. Busolic, F. Parada and R. Parra: ‘Recovery of iron from copper flash smelting slags’, Miner. Process. Extr. Metall. (Trans. Inst. Min. Metall. C), 2011, 120, 32–36. doi: 10.1179/037195510X12772935654945
   Web of Science ®Google Scholar
• E. Rudnik, L. Burzynska and W. Gumowska: ‘Hydrometallurgical recovery of copper and cobalt from reduction-roasted copper converter slag’, Miner. Eng., 2009, 22, 88–95. doi: 10.1016/j.mineng.2008.04.016
   Web of Science ®Google Scholar
• C. Arslana and F. Arslana: ‘Recovery of copper, cobalt, and zinc from copper smelter and converter slag’, Hydrometallurgy, 2002, 67, (1/3), 1–7. doi: 10.1016/S0304-386X(02)00139-1
   Web of Science ®Google Scholar
• A. N. Banza, E. Gock and K. Kongolo: ‘Base metals recovery from Copper smelter slag by oxidizing leaching and solvent extraction’, Hydrometallurgy, 2002, 67, (1/3), 63–69. doi: 10.1016/S0304-386X(02)00138-X
   Web of Science ®Google Scholar
• J. H. Hu, H. Wang and H. L. Liu: ‘Polycrystalline structure of Copper slag at different calcining temperature’, J. Hunan Univ. Sci. Technol. (Nat. Sci. Ed.), 2011, 2, 97–99. (in Chinese)
   Google Scholar
• L. N. Zhang: ‘Study on selective precipitation valuable constituent in copper smelting slags’, PhD thesis, Northeastern University, 2005, 60–75. (in Chinese)
   Google Scholar
• H. Y. Cao, N. X. Fu and C. G. Wang: ‘Selective precipitation and separation of Fe components from copper smelting slags’, Mutipurpose Util. Miner. Resour., 2009, 2, 8–11. (in Chinese)
   Google Scholar
• L. Li, J. G. Hu and H. Wang: ‘Study on smelting reduction ironmaking of copper slag’, Chin. J. Process Eng., 2011, 1, 1–66. (in Chinese)
   Google Scholar
• X. L. Cheng, K. Zhao, Y. H. Qi, X. F. Shi and C. L. Zhen: ‘Direct reduction experiment on iron-bearing waste slag’, J. Iron. Steel Res. Int., 2013, 20, (3), 24–35. doi: 10.1016/S1006-706X(13)60064-3
   Web of Science ®Google Scholar
• T. J. Chun, D. Q. Zhu, J. Pan and Z. He: ‘Preparation of metallic iron powder from red mud by sodium salt roasting and magnetic separation’, Can. Metall. Q., 2014, 53, (2), 183–189. doi: 10.1179/1879139513Y.0000000114
   Web of Science ®Google Scholar
• T. J. Chun, H. M. Long and J. X. Li: ‘Alumina-iron separation of high Alumina Iron ore by carbothermic reduction and magnetic separation’, Sep. Sci. Technol., 2015, 50, (5), 760–766. doi: 10.1080/01496395.2014.959601
   Web of Science ®Google Scholar
• T. J. Chun, D. Q. Zhu and J. Pan: ‘Simultaneously roasting and magnetic separation to treat low grade siderite and hematite ores’, Miner. Process. Extr. Metall. Rev., 2015, 36, (4), 223–226. doi: 10.1080/08827508.2014.928620
   Web of Science ®Google Scholar
• D. Q. Zhu, T. J. Chun, J. Pan, L. M. Lu and Z. He: ‘Upgrading and dephosphorization of Western Australian Iron ore using reduction roasting by adding sodium carbonate’, Int. J. Miner. Metall. Mater., 2013, 20, (6), 505–513. doi: 10.1007/s12613-013-0758-8
   Web of Science ®Google Scholar
• H. L. Liu, J. H. Hu and H. Wang: ‘Phase transformation during the reduction process of copper-containing slag with hydrogen’, Chin. J. Process Eng., 2012, 2, 265–269. (in Chinese)
   Google Scholar
• S. K. Wei: ‘Metallurgical thermodynamics’, Chapter 3, 145; 1990, Shanghai, Shanghai Science and Technology Press.
   Google Scholar
• A. Muan and E. F. Osaborn: ‘Phase equilibria among oxides in steelmaking’, 203, 1965, Pergamon, Addison-Wesley Publishing Company INC.
   Google Scholar
• D. Q. Zhu, T. J. Chun, J. Pan and J. L. Zhang: ‘Influence of basicity and MgO content on metallurgical performances of Brazilian specularite pellets’, Int. J. Miner. Process., 2013, 125, 51–60. doi: 10.1016/j.minpro.2013.09.008
   Web of Science ®Google Scholar
• X. H. Huang: ‘Principles of steel metallurgy’, 209, 2002, Beijing, Metallurgical Industry Press.
   Google Scholar