References
- Dashunin NV, Manilova EP, Rybnikov AI. Phase and structural transformations in 12% chromium steel EP428 due to long term operation of moving blades. J Met Sci Heat Treat. 2007;47:23–29.
- Zhanga JM, Gao ZY, Zhuang JY, et al. Grain growth model of IN718 during holding period after hot deformation. J Mater Proce Tech. 2000;101:25–30. doi: 10.1016/S0924-0136(99)00437-9
- Mirzadeh H, Najafizadeh A. Hot deformation and dynamic recrystallization of 17-4 PH stainless steel. ISIJ Int. 2013;53:680–689. doi: 10.2355/isijinternational.53.680
- Huang J, Xu Z. Evolution mechanism of grain refinement based on dynamic recrystallization in multiaxially forged austenite. Mater Lett. 2006;60:1854–1858. doi: 10.1016/j.matlet.2005.12.110
- Chen X, Lin YC, Chen M, Li H, et al. Microstructural evolution of a nickel-based superalloy during hot deformation. J Mater Des. 2015;77:41–49. doi: 10.1016/j.matdes.2015.04.004
- Djaic RAP, Jonas JJ. Recrystallization of high carbon steel between intervals of high temperature deformation. Metall Trans. 1973;4:621–624. doi: 10.1007/BF02648720
- Mataya MC. Effect of multiple reductions on grain refinement during hot working of alloy 718. Sup Met App TMS. 1989;1:155–178.
- Domblesky JP, Jackman LA, Shivpuri R, et al. Prediction of grain size during multiple pass radial forging of alloy 718. Miner Metal Materi Soci. 1994;12:263–272.
- Zeng Z, Chen L, Zhuand F, et al. Static recrystallization behavior of a martensitic heat-resistant stainless steel 403Nb. Acta Metall Sin (Engl Lett). 2011;24:381–389.
- Shafiei E, Goodarzi N, Dehghani K, et al. A new constitutive equation to to predict single peak flow stress curves at high temperatures: a comprehensive study on different steels. Canad Metall Quart. 2016;56:104–112. doi: 10.1080/00084433.2016.1273567
- Ebrahimi GR, Keshmiri H, Mazinani M, et al. Multi-stage thermomechanical behavior of AISI410 martensitic steel. Mater Sci Eng A. 2013;559:520–527. doi: 10.1016/j.msea.2012.08.136
- Cao Y, Di H, Yi X, et al. On the hot deformation behavior of AISI420 stainless steel based on constitutive analysis and CSL model. Mater Sci Eng A. 2014;593:111–119. doi: 10.1016/j.msea.2013.11.030
- Liu J, Liu YG, Lin H, et al. The metadynamic recrystallization in the two-stage isothermal compression of 300M steel. Mater Sci Eng A. 2013;565:126–131. doi: 10.1016/j.msea.2012.11.116
- Soleymani V, Eghbali B. Grain refinement in alow carbon steel through multidirectional forging. J Iro Ste Rea Int. 2012;19:74–78. doi: 10.1016/S1006-706X(12)60155-1
- Abad R, Fernandez AI, Lopez B, et al. Effect of initial austenite microstructure on the softening precipitation interaction in a Low Nb microalloyed steel. ISIJ Int. 2001;41:1373–1382. doi: 10.2355/isijinternational.41.1373
- Zouari M, Bozzolo N, Loge RE. Mean field modeling of dynamic and post-dynamic recrystallization during hot deformation of Inconel718 in the absence of δ phase particles. Mater Sci Eng A. 2016;655:408–424. doi: 10.1016/j.msea.2015.12.102
- Bapari A, Najafizadeh A, Moazeny M, et al. Simulation of radial forging conditions by third hits hot compression tests. Mater Sci Eng A. 2008;491:258–265. doi: 10.1016/j.msea.2008.01.087
- Sakai T, Belyakov A, Kaibyshev R, et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Pro Mate Sci. 2014;60:130–207. doi: 10.1016/j.pmatsci.2013.09.002
- Fanga Y, Chenb X, Madiganc B, et al. Effects of strain rate on the hot deformation behavior and dynamicrecrystallization in China low activation martensitic steel. Fusion Eng Des. 2016;103:21–30. doi: 10.1016/j.fusengdes.2015.11.036
- Tchizhik AA, Tchizhik TA, Tchizhi AA. Optimization of the heat treatment for steam and gas turbine parts manufactured from 9–12% Cr steels. J Mater Pro Tech. 1998;77:226–232. doi: 10.1016/S0924-0136(97)00421-4
- Wang LL, Li RB, Liao YG, et al. Study on characterization of hot deformation of 403 steel. Mater Sci Eng A. 2013;567:84–88. doi: 10.1016/j.msea.2012.12.063
- Ren F, Chen J, Chen F. Constitutive modeling of hot deformation behavior of X20Cr13 martensitic stainless steel with strain effect. Trans Nonferrous Met Soc China. 2014;24:1407–1413. doi: 10.1016/S1003-6326(14)63206-4
- Belyakov A, Miura H, Sakai T. Dynamic recrystallization in ultra-fine-grained 304 stainless steel. Scr Mater. 2000;43:21–26. doi: 10.1016/S1359-6462(00)00373-0
- Hutchinson B, Hagstro J, Karlsson O. Microstructures and hardness of as-quenched martensites (0.1–0.5%C). Acta Materi. 2011;59:5845–5858. doi: 10.1016/j.actamat.2011.05.061
- Fernandez AL, Lopez B, Rodriguez-Ibabe JM. Relationship between the austenite recrystallized fraction and the softening measured from the interrupted torsion test technique. Scr Mater. 1999;40:543–549. doi: 10.1016/S1359-6462(98)00452-7
- Fernández AI, López B, Rodriguez-Ibabe JM. Static recrystallization mechanisms in a coarse-grained Nb-microalloyed austenite. Metal Mater Trans A. 2002;33:3089–3098. doi: 10.1007/s11661-002-0293-0
- Johnson WA, Mehl RF. Reaction kinetics in process of nucleation and growth. Trans AIME. 1939;135:416–458.
- Avrami M. Kinetics of phase change. I general theory. J Chem Phys. 1939;7:1103–1112. doi: 10.1063/1.1750380
- Kolmogorov AN. Probability theory and mathematical statistics. Izv Akad Nauk SSSR. 1937;3:355–368. Ser. Matem.
- Dehghan-Manshadi A, Barnett MR, Hodgson PD. Hot deformation and recrystallization of austenitic stainless steel: part II. Post-deformation recrystallization. Metal Mater Trans A. 2008;39:1371–1381. doi: 10.1007/s11661-008-9513-6
- Cheng MY, Du H, Wei Y, et al. Metadynamic recrystallization behavior and workability characteristics of HR3C austenitic heat-resistant stainless steel with processing. J Mater Proc Tech. 2016;235:134–142. doi: 10.1016/j.jmatprotec.2016.04.026
- Llanos L, Pereda B, Lopez B. Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels. Metal Mater Trans A. 2015;46:5248–5265. doi: 10.1007/s11661-015-3066-2