References
- Yu Y, Zhou J, Chen J, et al. Preparation, microstructure and tribological behavior of laser cladding NiAl intermetallic compound coating. Wear. 2012;274-275:298–305. doi: 10.1016/j.wear.2011.09.011
- Mohammadnezhad M, Shamanian M, Enayati MH. Formation of nanostructured NiAl coating on carbon steel by using mechanical alloying. Appl Surf Sci. 2012;263:730–736. doi: 10.1016/j.apsusc.2012.09.151
- Noebe RD, Bowman RR, Nathal NV. Physical and mechanical properties of the B2 compound NiAl. Int Mater Rev. 1993;38:193–232. doi: 10.1179/imr.1993.38.4.193
- Enayati MH, Karimzadeh F, Jafari M, et al. Microstructural and wear characteristics of HVOF-sprayed nanocrystalline NiAl coating. Wear. 2014;309:192–199. doi: 10.1016/j.wear.2013.10.015
- Abbasi M, Verdian MM. Processing and properties of CuAl2 intermetallic coatings. Surf Eng. 2017;33:186–191. doi: 10.1080/02670844.2016.1220733
- Chen C, Lu C, Feng X, et al. Effects of annealing on Al–Si coating synthesised by mechanical alloying. Surf Eng. 2017;33:548–558. doi: 10.1080/02670844.2017.1292706
- Sasaki T, Yagi T. Two-step diffusion treatment of aluminium-coated TiAl-based alloy. Surf Eng. 2016;32:809–815. doi: 10.1179/1743294415Y.0000000032
- Azakli Y, Tarakci M. Microstructural characterisation of borided binary Fe-W alloys. Surf Eng. 2018;34:226–234. doi: 10.1080/02670844.2016.1263712
- Jafari M, Mostaghimi J, Monajatizadeh H, et al. Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method. Surf Eng. 2018;34:220–225. doi: 10.1080/02670844.2016.1259731
- Peng CT, Chen Z, Liu Q, et al. Laser resurfacing of Al–Zn–Mg–Si coatings. Surf Eng. 2016;32:902–907. doi: 10.1080/02670844.2015.1104100
- Chen Y, Hu L, Qiu C, et al. Characterisation of multiphase ceramic coatings fabricated via laser in situ reaction technology. Surf Eng. 2018;34:301–308. doi: 10.1080/02670844.2017.1315484
- Wei DB, Zhang PZ, Yao ZJ, et al. Oxidation behaviour of plasma surface alloying on Ti6Al4V alloy. Surf Eng. 2018;34:14–21. doi: 10.1179/1743294415Y.0000000095
- Tao XP, Zhang S, Wu CL, et al. In situ synthesised WC-reinforced Co-based alloy layer by vacuum cladding. Surf Eng. 2018;34:316–323. doi: 10.1080/02670844.2017.1381376
- Rafiei M, Enayati MH, Karimzadeh F. Characterization and formation mechanism of nanocrystalline (Fe,Ti)3Al intermetallic compound prepared by mechanical alloying. J Alloys Compd. 2009;480:392–396. doi: 10.1016/j.jallcom.2009.02.072
- Rafiei M, Enayati MH, Karimzadeh F. Mechanochemical synthesis of (Fe,Ti)3Al-Al2O3 nanocomposite. J Alloys Compd. 2010;488:144–147. doi: 10.1016/j.jallcom.2009.09.007
- Rafiei M, Enayati MH, Karimzadeh F. The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe-Al system. J Mater Sci. 2010;45:4058–4062. doi: 10.1007/s10853-010-4490-8
- Chen JH, Hua PH, Chen PN, et al. Characteristics of multi-element alloy cladding produced by TIG process. Mater Lett. 2008;62:2490–2492. doi: 10.1016/j.matlet.2007.12.038
- Kubaski ET, Cintho OM, Capocchi JDT. Effect of milling variables on the synthesis of NiAl intermetallic compound by mechanical alloying. Powder Technol. 2011;214:77–82. doi: 10.1016/j.powtec.2011.07.038
- Hsu SE, Hsu IC. Study on VPS-cladding of NiAl intermetallics on the TiAl-based intermetallics. Corros Sci. 1999;41:1431–1445. doi: 10.1016/S0010-938X(98)00197-8
- Kaplin C, Ivanov R, Paliwal M, et al. The effect of nanostructure on the oxidation of NiAl. Intermetallics. 2014;54:209–217. doi: 10.1016/j.intermet.2014.06.013
- Hunziker O, Kurz W. Solidification microstructure maps in Ni-Al alloys. Acta Mater. 1997;45:4981–4992. doi: 10.1016/S1359-6454(97)00194-8
- Hunziker O, Kurz W. Directional solidification and phase equilibria in the Ni-Al system. MetallMater Trans A. 1999;30:3167–3175. doi: 10.1007/s11661-999-0227-1
- Zhang JF, Shen J, Shang Z, et al. Directional solidification and characterization of NiAl-9Mo eutectic alloy. Trans Nonferrous Met Soc China. 2013;23:3499–3507. doi: 10.1016/S1003-6326(13)62894-0
- Enayati MH, Karimzadeh F, Anvari SZ. Synthesis of nanocrystalline NiAl by mechanical alloying. J Mater Process Technol. 2008;200:312–315. doi: 10.1016/j.jmatprotec.2007.09.023
- Pan XM, Jin ZP, Zhao JC. Determination of the isothermal sections of the Al-Ni-Si ternary system at 750 and 850°C. Metall Mater Trans A. 2005;36A:1757–1767. doi: 10.1007/s11661-005-0040-4
- Richter WK, Chandrasekaran K, Ipser H. The Al-Ni-Si phase diagram Part II: phase equilibria between 33.3 and 66.7 at.% Ni. Intermetallics. 2004;12:545–554. doi: 10.1016/j.intermet.2004.01.009
- Lippold JC. Welding metallurgy and weldability. Hoboken (NJ): John Wiley & Sons, Inc; 2014.
- Ogawa T, Tsunetomi E. Hot cracking susceptibility of austenitic stainless steels. Weld Res Suppl. 1982;61:82–93.
- Maroef IS, Rowe MD, Edwards GR. The effect of silicon and iron on the weldability of NIeCoeCreSi HR-160 alloy. In: Boellinghaus T, Herold H, editors. Hot cracking phenomena in welds. Berlin: Springer; 2010. p. 19–25.
- Yoo J, Han K, Park Y, et al. Effect of silicon on the solidification cracking behavior and metastable carbide formation in austenitic high Mn steel welds. Mater Chem Phys. 2014;148:499–502. doi: 10.1016/j.matchemphys.2014.08.053