Bibliography
- MPIF. Materials standards for pm structural parts. MPIF 35, 2016.
- Mascarenhas J. Powder Metallurgy - A major partner of the sustainable development. Mater Sci Forum. 2004;455–456(1):857–860.
- Foss JE, DeFranco D. The Northstar cam bearing caps; a new application for aluminum P/M. in SAE International Congress and Exposition, 1994, p. Technical Paper No. 940429.
- Bishop DP, Hofmann B, Couchman KR. Properties and attributes of commercially available AC2014-type aluminum P/M alloys. In: H Ferguson, DT Whychell, editor. Advances in Powder Metallurgy and particulate materials. 1st ed., Princeton, NJ: MPIF; 2000. p. 87–100.
- Boland CD, Hexemer RL, Donaldson IW, et al. Industrial processing of a novel Al-Cu-Mg powder metallurgy alloy. Mater.: Sci. Eng. A. 2013;559:902–908. doi:https://doi.org/10.1016/j.msea.2012.09.049.
- Cooke RW, Hexemer RL, Donaldson IW, et al. Press-and-sinter processing of a PM counterpart to wrought aluminum 2618. J Mater Process Technol 2016;230:72–79. doi:https://doi.org/10.1016/j.jmatprotec.2015.11.011.
- LaDelpha ADP, Neubing HC, Bishop DP. Metallurgical assessment of a 7xxx series PM alloy. Mater Sci Eng A. 2009;520:105–113.
- Smith WF. Structure and properties of engineering alloys McGraw-Hill series in materials science and engineering. 2nd ed New York: McGraw-Hill Inc; 1993.
- Ibrahim A, Bishop DP, Kipouros GJ. Sinterability and characterization of commercial aluminum powder metallurgy alloy alumix 321. Powder Technol 2015;279:106–112. doi:https://doi.org/10.1016/j.powtec.2015.04.001.
- Asgharzadeh H, Simchi A. Hot deformation of PM Al6061 alloy produced by sintering and powder extrusion. Powder Metall 2008;51(4):354–360. doi:https://doi.org/10.1179/174329008X286695.
- Asgharzadeh H, Simchi A, Kim HS. Dynamic restoration and microstructural evolution during hot deformation of a P/M Al6063 alloy. Mater Sci Eng A. 2012;542:56–63. doi:https://doi.org/10.1016/j.msea.2012.02.031.
- Sweet GAW, Williams BW, Taylor A, et al. A microstructural and mechanical property investigation of a hot upset forged 2xxx series aluminum powder metallurgy alloy reinforced with AlN. J Mater Process Technol 2020;284(April):116742), doi:https://doi.org/10.1016/j.jmatprotec.2020.116742.
- Mann RED, Hexemer RL, Donaldson IW, et al. Hot deformation of an Al-Cu-Mg powder metallurgy alloy. Mater Sci Eng A. 2011;528(16–17):5476–5483. doi:https://doi.org/10.1016/j.msea.2011.03.081.
- Ibrahim AM, Bishop DP, Kipouros GJ. Effect of swaging and rolling post sintering treatments on the corrosion behaviour of alumix 321 PM alloy. Powder Technol 2017;320:89–98. doi:https://doi.org/10.1016/j.powtec.2017.07.034.
- MacAskill IA, Ladepha ADP, Milligan JH, et al. Effects of cold and hot densification on the mechanical properties of a 7XXX series powder metallurgy alloy. Powder Metall 2009;52(4):304–310. doi:https://doi.org/10.1179/174329009X409723.
- Wilson MF, et al. Hot extrusion of a commercial aluminum powder metallurgy metal matrix composite material. Mater. Perform. Charact. 2020;9(4):498–513. doi:https://doi.org/10.1520/MPC20190161.
- Kaneko RS, Bakow L, Lee EW. Aluminum alloy 6013 sheet for new U.S. navy aircraft,”. J. Miner. Met. Mater. Soc. 1990;42(May):16–18. doi:https://doi.org/https://doi.org/10.1007/BF03220941.
- Braun R. Investigation on the long-term stability of 6013-T6 sheet. Mater Charact 2006;56(1):85–95. doi:https://doi.org/10.1016/j.matchar2005.03.006.
- MPIF. Method for determination of apparent density of metal powders using the Arnold Meter. MPIF 48, 2019.
- MPIF. Method for determination of density of compacted or sintered powder metallurgy (pm) products materials. MPIF 42, 2019.
- MPIF. Determination of green strength of compacted powder metallurgy (pm) materials. MPIF 15, 2019.
- Aluminum Association. Aluminum design manual. Arlington: Aluminum Association; 2020.
- MPIF. Standard test methods for tension testing of metallic materials. MPIF E8-M, 2021.
- MPIF. Determination of rotating beam fatigue properties of powder metallurgy (pm) materials. MPIF 56, 2019.
- German RM. Powder metallurgy science. 2nd ed Princeton (New Jersey): Metal Powder Industries Federation; 1994.
- Various. ASM handbook 7: powder metallurgy. 2nd ed. Cleveland (Ohio): ASM International; 2015.
- Huo SH, Qian M, Schaffer GB, et al. Aluminium powder metallurgy. In: RN Lumley, editor. Fundamentals of aluminium metallurgy: production, processing and applications. Woodhead Publishing Limited, Philadelphia, PA, USA; 2010. p. 655–701.
- Sweet GAW, et al. Microstructural evolution of a forged 2XXX series aluminum powder metallurgy alloy. Mater Charact 2019;151(February):342–350. doi:https://doi.org/10.1016/j.matchar.2019.03.033.
- MacAskill IA, Hexemer RL, Donaldson IW, et al. Effects of magnesium, tin and nitrogen on the sintering response of aluminum powder. J Mater Process Technol 2010;210(15):2252–2260. doi:https://doi.org/10.1016/j.jmatprotec.2010.08.018.
- M. Bauser, G. Sauer, and K. Siegert, Eds., Extrusion, 2nd ed. Materials Park, Ohio: ASM International, 2006.
- Starink MJ. Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics. Int Mater Rev 2004;49(3–4):191–226. doi:https://doi.org/10.1179/095066004225010532.
- Brooks CR. Heat treating of nonferrous alloys. In: ASM Handbook committee, editors. ASM handbook vol 4: heat treating. Materials Park, Ohio: ASM International; 1991. p. 1826–2123.
- Various, S.R.Lampman editor. ASM Handbook volume 19: fatigue and fracture. Materials Park, Ohio, USA: ASM International, 1996.
- ASM International. Atlas of stress-strain curves. 2nd ed. Materials Park (Ohio): ASM International; 2002.
- Schaffer GB, Sercombe TB, Lumley RN. Liquid phase sintering of aluminium alloys. Mater Chem Phys 2001;67(1):85–91.
- Rooy EL, Pickens JR, James RS, et al. Aluminum and aluminum alloys. In: SR Lampman, TB Zorc, SD Henry, JL Daquila, AW Ronke, editors. ASM Metals handbook, Vol 02 properties and selection: nonferrous alloys and special-purpose materials. Materials Park, Ohio: ASM International; 1990. p. 17–759.