The mechanical properties of austempered 1.75Ni-1.5Cu-0.5Mo alloyed PM steels

References

• Erden MA, Yaşar N, Korkmaz ME, et al. Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method. Int J Adv Manuf Technol. 2021;114(9):2811–2827.
   Web of Science ®Google Scholar
• Samal P, Newkirk J. Powder metallurgy methods and applications. ASM Handb Powder Metall. 2015;7.
   Google Scholar
• Karwan-Baczewska J. The properties of Fe-Ni-Mo-Cu-B materials produced via liquid phase sintering. Arch Metall Mater. 2011;56(3):789–796.
   Web of Science ®Google Scholar
• Asthana R, Kumar A, Dahotre B. Powder metallurgy and ceramic forming. Mater Process Manuf Sci. 2006: 167–245.
   Google Scholar
• Putatunda SK, Martis C, Boileau J. Influence of austempering temperature on the mechanical properties of a low carbon low alloy steel. Mater Sci Eng A. 2011;528(15):5053–5059. doi:10.1016/j.msea.2011.03.038
   Web of Science ®Google Scholar
• Tekeli S, Güral A. Effect of intercritical annealing and quenching plus tempering heat treatments on microstructure of Ni added powder metallurgy steels. Mater Des. 2007;28(4):1353–1357.
   Web of Science ®Google Scholar
• Altuntaş O, Güral A, Tekeli S. Microstructure engineering for superior wear and impact toughness strength of hypereutectoid powder metallurgy steel. Powder Metall. 2022;65(2):101–111.
   Web of Science ®Google Scholar
• Campos M, Sicre-Artalejo J, Munoz J. Effect of austempering conditions on the microstructure and tensile properties of low alloyed sintered steel. Metall Mater Trans A. 2010;41(7):1847–1854.
   Google Scholar
• Li Z, Chai F, Zhang Z. Effect of intercritical heat treatment on microstructure, nano-size precipitation and mechanical properties of Fe–Ni–Cu–Al low carbon steel. Mater Sci Eng A. 2022: 144033.
   Google Scholar
• Shukla N, Roy H, Show BK. Effect of prior austempering heat treatment on the microstructure, mechanical properties and high-stress abrasive wear behaviour of a 0·33% C dual-phase steel. Can Metall Q. 2016;55(1):13–22.
   Web of Science ®Google Scholar
• Khorsand H, Habibi SM, Yoozbashizadea H. The role of heat treatment on wear behavior of powder metallurgy low alloy steels. Mater Des. 2002;23(7):667–670.
   Web of Science ®Google Scholar
• Caballero FG, Bhadeshia HKDH, Mawella KJA. Very strong low temperature bainite. Mater Sci Technol. 2002;18(3):279–284.
   Web of Science ®Google Scholar
• Suh MS, Nahm SH, Suh CM. Tribology characteristics and UNSM effects of bainite and martensite spring steels. Metals. 2022;12(6):901.
   Web of Science ®Google Scholar
• Cinar Z, Asmael M, Zeeshan Q. Developments in plasma arc cutting (PAC) of steel alloys: a review. J Kejurut. 2018;30(1):7–16.
   Web of Science ®Google Scholar
• Heidarshenas B, Hussain G, Asmael MBA. Development of a TiC/Cr23C6 composite coating on a 304 stainless steel substrate through a tungsten inert gas process. Coatings. 2017;7(6):80.
   Web of Science ®Google Scholar
• Wang K, Tan Z, Gao G. Microstructure-property relationship in bainitic steel: the effect of austempering. Mater Sci Eng A. 2016;675:120–127. doi:10.1016/j.msea.2016.08.026
   Web of Science ®Google Scholar
• Güral A, Altuntaş O. Improving the impact toughness properties of high carbon powder metallurgy steels with novel spherical cementite in the bainitic matrix (SCBM) microstructures. Mater Chem Phys. 2021;259:124203. doi:10.1016/j.matchemphys.2020.124203
   Web of Science ®Google Scholar
• Saxena A, Prasad SN, Goswami S. Influence of austempering parameters on the microstructure and tensile properties of a medium carbon–manganese steel. Mater Sci Eng A. 2006;431(1-2):53–58. doi:10.1016/j.msea.2005.06.018
   Web of Science ®Google Scholar
• Putatunda SK, Martis C, Boileau J. Influence of austempering temperature on the mechanical properties of a low carbon low alloy steel. Mater Sci Eng A. 2011;528(15):5053–5059. doi:10.1016/j.msea.2011.03.038
   Web of Science ®Google Scholar
• Garcia-Mateo C, Caballero FG. Development of hard bainite. ISIJ Int. 2003;43(8):1238–1243. doi:10.2355/isijinternational.43.1238
   Web of Science ®Google Scholar
• Chakraborty J, Bhattacharjee D, Manna I. Austempering of bearing steel for improved mechanical properties. Scr Mater. 2008;59(2):247–250. doi:10.1016/j.scriptamat.2008.03.023
   Web of Science ®Google Scholar
• Ahmadabadi MN, Ghasemi HM, Osia M. Effects of successive austempering on the tribological behavior of ductile cast iron. Wear. 1999;231(2):293–300. doi:10.1016/S0043-1648(99)00163-5
   Web of Science ®Google Scholar
• Shaeri MH, Saghafian H, Shabestari SG. Effects of austempering and martempering processes on amount of retained austenite in Cr-Mo steels (FMU-226) used in mill liner. J Iron Steel Res Int. 2010;17(2):53–58. doi:10.1016/S1006-706X(10)60059-3
   Web of Science ®Google Scholar
• Salman S, Fındık F, Topuz P. Effects of various austempering temperatures on fatigue properties in ductile iron. Mater Des. 2007;28(7):2210–2214. doi:10.1016/j.matdes.2006.06.017
   Web of Science ®Google Scholar
• Rementeria R, Aranda MM. Improving wear resistance of steels through nanocrystalline structures obtained by bainitic transformation. Mater Sci Technol. 2016;32(4):308–312. doi:10.1080/02670836.2015.1132048
   Web of Science ®Google Scholar
• Ibrahim KM, Ismail A. Influence of hot deformation and austempering process on microstructure and mechanical properties of high Si-Mn steel. Can Metall Q. 2005;4:489–494.
   Google Scholar
• Sista V, Nash P, Sahay SS. Accelerated bainitic transformation during cyclic austempering. J Mater Sci. 2007;42(21):9112–9115.
   Web of Science ®Google Scholar
• Hasan HS, Peet M, Bhadeshia HKDH, et al. Temperature cycling and the rate of the bainite transformation. Mater Sci Technol. 2010;26(4):453–456.
   Web of Science ®Google Scholar
• Ramachandran DC, Moon J, Lee CH. Role of bainitic microstructures with MA constituent on the toughness of an HSLA steel for seismic resistant structural applications. Mater Sci Eng A. 2021;801:140390.
   Web of Science ®Google Scholar
• Katiyar PK, Misra S, Mondal K. Comparative corrosion behavior of five microstructures (pearlite: bainite, spheroidized, martensite, and tempered martensite) made from a high carbon steel. Metall Mater Trans A. 2019;50(3):1489–1501.
   Google Scholar
• Gobber FS, Bidulská J, Fais A, et al. Innovative densification process of a Fe-Cr-C powder metallurgy steel. Metals. 2021;11(4):665.
   Web of Science ®Google Scholar
• Glodež S, Vučković K, Šori M, et al. The influence of thermal treatment on the low-cycle fatigue behaviour of Cu-Ni-Mo sintered steel. Mech Mater. 2019;129:57–62.
   Web of Science ®Google Scholar
• Chawla N, Murphy TF, Narasimhan KS, et al. Axial fatigue behavior of binder-treated versus diffusion alloyed powder metallurgy steels. Mater Sci Eng A. 2001;308:180–188.
   Web of Science ®Google Scholar
• Andrew KW. Empirical formulae for the calculation of some transformation temperatures. J Iron Steel Inst. 1965;203:721–727.
   Google Scholar
• Sheikhi Moghaddam K, Solimanjad N. Effects of sinter hardening technology on homogeneous and heterogeneous microstructures. Powder Metall. 2013;56(3):245–250.
   Web of Science ®Google Scholar
• Wu MW, Hwang KS, Chuang KH. Improved distribution of nickel and carbon insintered steels through addition of chromium and molybdenum. Powder Metall. 2008;51(2):160–165.
   Web of Science ®Google Scholar
• Morawiec M, Ruiz-Jimenez V, Garcia-Mateo C, et al. Study of the isothermal bainitic transformation and austenite stability in an advanced Al-rich medium-Mn steel. Arch Civil Mech Eng. 2022;22:152.
   Web of Science ®Google Scholar
• Nasr El-Din H, Nofal AA, Ibrahim KM, et al. Ausforming of austempered ductile iron alloyed with nickel. Int J Cast Met Res. 2006;9(3):137–150.
   Google Scholar
• Callister WD, Rethwisch DG. Materials science and engineering: an introduction. New York: Wiley; 2018.
   Google Scholar
• Badini C, Gianoglio C, Pradelli G. The effect of carbon: chromium and nickel on the hardness of borided layers. Surf Coat Technol. 1987;30(2):157–170.
   Web of Science ®Google Scholar
• Wang Y, Liu B, Pan Q. Effect of austempering on mechanical properties of Nb/V microalloyed bainitic bearing steel. Crystals. 2022;12(7):1001.
   Web of Science ®Google Scholar
• Garcia-Mateo C, Caballero FG. Low temperature bainite. J Phys. 2003;112:285–288.
   Google Scholar
• Uthaisangsuk V, Muenstermann S, Prahl U. A study of microcrack formation in multiphase steel using representative volume element and damage mechanics. Comput Mater Sci. 2011;4:1225–1232.
   Google Scholar
• Zhao N, Roy A, Wang W. Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel. Mech Mater. 2019;130:29–38.
   Web of Science ®Google Scholar
• Murathan ÖF, Kılıçlı V. Nano bainitic steels. J Polytech. 2016;19(2):115–128.
   Google Scholar
• Kumar A, Singh A. Mechanical properties of nanostructured bainitic steels. Materialia. 2021;15:101034.
   Google Scholar