A Physics-Based Integrated Model of a Spark Ignition Engine and a Three-Way Catalyst

REFERENCES

• Annand , W. 1963 . Heat transfer in the cylinders of reciprocating internal combustion engines . Proc. Inst. of Mech. Eng. , 177 ( 36 ), 973 – 990 .
   Google Scholar
• Aquino , C. 1981 . Transient A/F control characteristics of the 5 liter central fuel injection engine . SAE Paper 810494 .
   Google Scholar
• Arsie , I. , Pianese , C. , and Rizzo , G. 1998 . Models for the prediction of performance and emissions in a spark ignition engine—A sequentially structured approach . SAE Paper 980779 .
   Google Scholar
• Auckenthaler , T. 2005 . Modeling and control of three-way catalytic converters . PhD thesis, Swiss Federal Institute of Technology, Zurich .
   Google Scholar
• Balenovic , M. 2002 . Modeling and Model-Based Control of a Three-Way Catalytic Converter . Ph.D. thesis, Technical University of Eindhoven .
   Google Scholar
• Benz , M. , Onder , C. , and Guzzella , L. 2010 . Engine emissions modeling using a mixed physics and regression approach . J. Eng. Gas Turbines Power , 132 , 042803-1 – 042803-11 .
   Web of Science ®Google Scholar
• Bérard , F. , Cotta , A. , Stokes , J. , Thring , R. , and Wheals , J. 2000 . An integrated powertrain (IPT) model—stage one . SAE Paper 2000-01-0864.
   Google Scholar
• Brandt , E. , Wang , Y. , and Grizzle , J. 2000 . Dynamic modeling of a three-way catalyst for SI engine exhaust emission control . IEEE Trans. Control Syst. Technol. , 8 , 767 – 776 .
   Web of Science ®Google Scholar
• Cho , D. , and Hedrick , J. 1989 . Automotive powertrain modeling for control . J. Dyn. Syst. Meas. Cont. , 111 , 568 – 576 .
   Web of Science ®Google Scholar
• Cohen , A. , Randall , K. , Tether , C. , VanVoorhies , K. , and Tennant , J. 1984 . Optimal control of cold automobile engines . SAE Paper 840544 .
   Google Scholar
• Delphi . 2009 . Worldwide Emissions Standards—Passenger Cars and Light Duty Trucks. Website, http://www.delphi.com/.
   Google Scholar
• Fiengo , G. , Glielmo , L. , Santini , S. , and Serra , G. 2002 . Control-oriented models for TWC-equipped spark ignition engines during the warm-up phase. Presented at the American Control Conference, Anchorage, AK, May 8–10 , pp. 1761 – 1766 .
   Google Scholar
• Fuller , E. , Schettler , P. , and Giddings , J. 1966 . A new method for prediction of binary gas-phase diffusion coefficients . Ind. Eng. Chem. , 58 .
   Google Scholar
• Fussey , P. , Goodfellow , C. , Oversby , K. , Porter , B. , and Wheals , J. 2001 . An integrated powertrain (IPT) model—Stage 2: Systems integration, supervisory control and simulation of emissions control technology . SAE Paper 2001-01-0938 .
   Google Scholar
• Groppi , G. , Belloli , A. , Tronconi , E. , and Forzatti , P. 1995 . A comparison of lumped and distributed models of monolith catalytic combustors . Chem. Eng. Sci. , 50 , 2705 – 2715 .
   Web of Science ®Google Scholar
• Guzzella , L. , and Onder , C. 2004 . Introduction to Modeling and Control of Internal Combustion Engine Systems , Springer .
   Google Scholar
• Hart , E. , and Elkin , W. 1946 . Welding fine thermocouple wires . J. Sci. Instrum. , 23 , 17 – 18 .
   Google Scholar
• Hawthorn , R. 1974 . Afterburner catalysts effects of heat and mass transfer between gas and catalyst surface . In American Institute of Chemical Engineers Symposium Series , Vol. 70 , pp. 428 – 438 .
   Google Scholar
• Hayes , R. , and Kolaczkowski , S. 1994. Mass and heat transfer effects in catalytic monolith reactors. Chem. Eng. Sci. , 49, 3587–3599.
   Web of Science ®Google Scholar
• Heck , R. , Wei , J. , and Katzer , J. 1976 . Mathematical modeling of monolithic catalysts . AIChE J. , 22 , 477 – 484 .
   Web of Science ®Google Scholar
• Hendricks , E. 1997 . Engine modeling for control applications: A critical survey . Meccanica , 32 ( 5 ), 387 – 396 .
   Web of Science ®Google Scholar
• Heywood , J. 1988 . Internal Combustion Engine Fundamentals . McGraw-Hill .
   Google Scholar
• Hirsch , M. , Alberer , D. , and del Re , L. 2008 . Grey-box control oriented emissions models. In Proceedings of the 17th IFAC World Congress , pp. 8514 – 8519 .
   Google Scholar
• Holder , R. , Bollig , M. , Anderson , D. , and Hochmuth , J. 2006 . A discussion on transport phenomena and three-way kinetics of monolithic converters . Chem. Eng. Sci. , 61 , 8010 – 8027 .
   Web of Science ®Google Scholar
• Keynejad , F. , and Manzie , C. 2011 . Cold start modeling of spark ignition engines . Control Eng. Pract. , 19 , 912 – 925
   Web of Science ®Google Scholar
• Koltsakis , G. , Konstantinidis , P. , and Stamatelos , A. 1997 . Development and application range of mathematical models for 3-way catalytic converters . Appl. Catal. B: Env. , 12 , 161 – 191 .
   Web of Science ®Google Scholar
• Lavoie , G. , and Blumberg , P. 1980 . A fundamental model for predicting fuel consumption, NOx and HC emissions of the conventional spark-ignited engine . Combust. Sci. Technol. , 21 , 225 – 258 .
   Web of Science ®Google Scholar
• Lide , D. 2007 . CRC Handbook of Chemistry and Physics . CRC Press , Boca Raton , FL , Internet version: http://www.hbcpnetbase.com/.
   Google Scholar
• Lumsden , G. 2004 . Characterizing engine emissions with spark efficiency curves . SAE Paper 2004-01-3055 .
   Google Scholar
• Moskwa , J. 1988 . Automotive Engine Modeling for Real Time Control . Ph.D. thesis, Massachusetts Institute of Technology.
   Google Scholar
• Oh , S. , and Cavendish , J. 1982 . Transients of monolithic catalytic converters: Response to step changes in feedstream temperature as related to controlling automobile emissions . Ind. Eng. Chem. Prod. Res. Devel. , 21 , 29 – 37 .
   Web of Science ®Google Scholar
• Pattas , K. , Stamatelos , A. , Pistikopoulos , P. , Koltsakis , G. , Konstandinidis , P. , Volpi , E. , and Leveroni , E. 1994 . Transient modeling of 3-way catalytic converters . SAE Paper 940934 .
   Google Scholar
• Petzold , L. 1982 . A description of DASSL: A differential/algebraic system solver. Presented at International Mathematics and Computers Simulation Congress on Systems Simulation and Scientific Computation, Montreal, Canada, August 9 .
   Google Scholar
• Pontikakis , G. , and Stamatelos , A. 2004 . Identification of catalytic converter kinetic model using a genetic algorithm approach . Proc. Inst. Mech. Eng. , 218 , 1455 – 1472 .
   Web of Science ®Google Scholar
• Sanketi , P. , Zavala , J. , Hedrick , J. 2006a . Automotive engine hybrid modeling and control for reduction of hydrocarbon emissions . Int. J. Control , 79 , 449 – 464 .
   Web of Science ®Google Scholar
• Sanketi , P. , Zavala , J. , Hedrick , J. , Wilcutts , M. , and Kaga , T. 2006b . A simplified catalytic converter model for automotive coldstart applications with adaptive parameter fitting. Presented at the 8th International Symposium on Advanced Vehicle Control, Taipei, Taiwan, August 20–24.
   Google Scholar
• Shaw , B. , Fischer , G. , and Hedrick , J. 2002 . A simplified coldstart catalyst thermal model to reduce hydrocarbon emissions. Presented at the 15th Triennial World Congress of the International Federation of Automatic Control, Barcelona, Spain.
   Google Scholar
• Shayler , P. , and Belton , C. 1999 . In-cylinder fuel behavior and exhaust emissions during the cold operation of a spark ignition engine . Proc. Inst. Mech. Eng. , 213 , 161 – 174 .
   Web of Science ®Google Scholar
• Shayler , P. , Darnton , N. , and Ma , T. 1997 . Factors influencing drive cycle emissions and fuel consumption . SAE Paper 971603 , pp. 11 – 21 .
   Google Scholar
• Subramaniam , B. , and Varma , A. 1985 . Reaction kinetics on a commercial three-way catalyst: The CO-NO-O2-H2O system . Ind. Eng. Chem. Prod. Res. Devel. , 24 , 512 – 516 .
   Web of Science ®Google Scholar
• Voltz , S. , Morgan , C. , Liederman , D. , and Jacob , S. 1973 . Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts . Ind. Eng. Chem. Prod. Res. Devel. , 12 , 294 – 301 .
   Web of Science ®Google Scholar