REFERENCES
- Chen, R.H., Suryanarayana, C., and Chaos, M. 2006. Combustion characteristics of mechanically alloyed ultrafine-grained Al-Mg powders. Adv. Energy Mater., 8, 563–567.
- Conkling, J.A., and Mocella, C. 2011. Chemistry of Pyrotechnics: Basic Principles and Theory, 2nd ed. CRC Press, Boca Raton, FL, Chap. 2., pp. 50–54.
- Czerwinski, F. 2002. The oxidation behaviour of an AZ91D magnesium alloy at high temperatures. Acta Mater., 50, 2639–2654.
- Dreizin, E.L. 2000. Phase changes in metal combustion. Prog. Energy Combust., 26, 57–78.
- Dreizin, E.L., Shoshin, Y.L., Mudryy, R.S., and Hoffmann, V. K. 2002. Constant pressure flames of aluminum and aluminum-magnesium mechanical alloy aerosols in microgravity. Combust. Flame, 130, 381–385.
- Gromov, A.A., Pautova, Y.I., Lider, A.M., Korotkikh, A.G., Teipel, U., Chaplina, E.V., and Sigfusson, T.I. 2011. Interaction of powdery Al, Zr and Ti with atmospheric nitrogen and subsequent nitride formation under the metal powder combustion in air. Powder Technol., 214, 229–236.
- Jafari, H., Idris, M.H., and Ourdjini, A. 2011. High temperature oxidation of AZ91D magnesium alloy granule during in-situ melting. Corrosion Sci., 53, 655–663.
- Kim, D.G., Kaneko, J., and Sugamata, M. 1995. Preferential oxidation of Mg in mechanically alloyed Al-Mg-O based systems. Mater. Trans., 36, 305–311.
- Koch, C.C. 1996. Amorphization of single composition powders by mechanical milling. Scr. Mater., 34, 21–27.
- Liao, X.Z., Huang, J.Y., Zhu, Y.T., Zhou, F., and Lavernia, E.J. 2003. Nanostructures and deformation mechanisms in a cryogenically ball-milled Al-Mg alloy. Philos. Mag., 83, 3065–3075.
- Oleszak, D., and Shingu, P.H. 1996. Nanocrystalline metals prepared by low energy ball milling. J. Appl. Phys., 79, 2975–2980.
- Ouyang, D.H., Pan, G.P., Guan, H., Zhu, C.G., and Chen, X. 2011. Effect of different additives on the thermal properties and combustion characteristics of pyrotechnic mixtures containing the KClO4/Mg-Al alloy. Thermochim. Acta, 513, 119–123.
- Pourmortazavi, S.M., Hajimirsadeghi, S.S., Kohsari, I., Fathollahi, M., and Hosseini, S.G. 2008a. Thermal decomposition of pyrotechnic mixtures containing either aluminum or magnesium powder as fuel. Fuel, 87, 244–251.
- Pourmortazavi, S.M., Hosseini, S.G., Hajimirsadeghi, S.S., and Alamdari, R.F. 2008b. Investigation on thermal analysis of binary zirconium/oxidant pyrotechnic systems. Combust. Sci. Technol., 180, 2093–2102.
- Razavi-Tousi, S.S., and Szpunar, J.A. 2013. Effect of structural evolution of aluminum powder during ball milling on hydrogen generation in aluminum-water reaction. Int. J. Hydrogen Energy, 38, 795–806.
- Schoenitz, M., and Dreizin, E.L. 2004. Oxidation processes and phase changes in metastable Al-Mg Alloys, J. Propul. Power, 20, 1064–1068.
- Schoenitz, M., Dreizin, E.L., and Shtessel, E. 2003. Constant volume explosions of aerosols of metallic mechanical alloys and powder blends. J. Propul. Power, 19, 405–412.
- Scudino, S., Sakaliyska, M., Stoica, M., Surreddi, K.B., Ali, F., Vaughan, G., Yavari, A.R., and Eckert, J. 2008. In-situ X-ray diffraction of mechanically milled β-Al3Mg2 powders. Phys. Status Solidi RRL, 2, 272–274.
- Scudino, S., Sakaliyska, M., Surreddi, K.B., and Eckert, J. 2009. Mechanical alloying and milling of Al-Mg alloys. J. Alloys Compd., 483, 2–7.
- Shamsipur, M., Pourmortazavi, S.M., Roushani, M., and Miran Beigi, A.A. 2013. Thermal behavior and non-isothermal kinetic studies on titanium hydride-fueled binary pyrotechnic compositions. Combust. Sci. Technol., 185, 122–133.
- Shih, T.S., Wang, J.H., and Chong, K.Z. 2004. Combustion of magnesium alloys in air. Mater. Chem. Phys., 8, 302–309.
- Shortridge, R.G., Wilharm, C.K., and Yamamoto, M.C.M. 2007. Elimination of perchlorate oxidizers from pyrotechnic flare compositions. SERDP Final Technical report WP-1280-FR.
- Shoshin, Y.L., Mudryy, R.S., and Dreizin, E.L. 2002. Preparation and characterization of energetic Al-Mg mechanical alloy powders. Combust. Flame, 128, 259–269.
- Shoshin, Y.L., Trunov, M.A., Zhu, X., Schoenitz, M., and Dreizin, E.L. 2006. Ignition of aluminum-rich Al-Ti mechanical alloys in air. Combust. Flame, 144, 688–697.
- Umbrajkar, S.M., Schoenitz, M., Jones, S.R., and Dreizin, E.L. 2005. Effect of temperature on synthesis and properties of aluminum-magnesium mechanical alloys. J. Alloys Compd., 402, 70–77.
- Varin, R.A., Czujko, T., and Wronski, Z. 2006. Particle size, grain size and γ-MgH2 effects on the desorption properties of nanocrystalline commercial magnesium hydride processed by controlled mechanical milling. Nanotechnology, 17, 3856–3865.
- Wang, Y., Jiang, W., Zhang, X.F., Liu, H.Y., Liu, Y.Q., and Li, F.S. 2011. Energy release characteristics of impact-initiated energetic aluminum-magnesium mechanical alloy particles with nanometer-scale structure. Thermochim. Acta, 512, 233–239.
- Williamson, G.K., and Hall, W.H. 1953. X-ray line broadening from filed aluminum and wolfram. Acta Metall., 1, 22–31.
- Yabe, H., and Kuji, T. 2007. Thermal stability and hydrogen absorption/desorption properties of Mg17Al12 produced by bulk mechanical alloying. J. Alloys Compd., 433, 241–245.
- Zhou, P.H., Deng, L.J., Xie, J.L., Liang, D.F., Chen, L., and Zhao, X.Q. 2005. Nanocrystalline structure and particle size effect on microwave permeability of FeNi powders prepared by mechanical alloying. J. Magn. Magn. Mater., 292, 325–331.