Energy Balance Analysis to Assess Efficiency Improvements with Low Heat Rejection Concepts Applied to Low Temperature Combustion

References

• Bittle, J.A., Knight, B.M., and Jacobs, T.J. 2010. Biodiesel effects on cycle-to-cycle variability of combustion characteristics in a common-rail medium-duty diesel engine. SAE Technical Paper 2010-01-0867.
   Google Scholar
• Bittle, J.A., Knight, B.M., and Jacobs, T.J. 2011. Two-stage ignition as an indicator of low-temperature diesel combustion. Combust. Sci. Technol., 183(9), 947–966.
   Web of Science ®Google Scholar
• Brunt, M.F.J., and Platts, K.C. 1999. Calculation of heat release in direct injection diesel engines. SAE Int. J. Engines, 108, 161–175.
   Google Scholar
• Caton, J.A. 2011. Thermodynamic advantages of low temperature combustion (LTC) engines using low heat rejection (LHR) concepts: Results from a thermodynamic cycle simulation. SAE Technical Paper 2011-01-0312.
   Google Scholar
• Ciniviz, M., Hasimoglu, C., Sahin, F., and Salman, M. 2008. Impact of thermal barrier coating application on the performance and emissions of a turbocharged diesel engine. J. Autom. Engines, 222, 2447–2455.
   Web of Science ®Google Scholar
• Dempsey, A.B., Walker, N.R., Gingrich, E., and Reitz, R.D. 2014. Comparison of low temperature combustion strategies for advanced compression ignition engines with a focus on controllability. Combust. Sci. Technol., 186(2), 210–241.
   Web of Science ®Google Scholar
• Depcik, C., Jacobs, T., Hagena, J., and Assanis, D., 2007. Instructional use of a single-zone, premixed charge, spark-ignition engine heat release simulation. Int. J. Mech. Eng. Educ., 35(1), 1–31.
   Google Scholar
• Donn, C., Zulehner, W., Ghebru, D., Spicher, U., and Honaen, M. 2011. Experimental heat flux analysis of an automotive diesel engine in steady-state operation and during warm-up. SAE Technical Paper 2011-24-0067
   Google Scholar
• Esquivel, J., Tompkins, B.T., and Jacobs, T.J. 2008. The development of a diesel engine experimental research facility for biodiesel combustion studies. 2008 Technical Meeting of the Central States Section of the Combustion Institute, Tuscaloosa, AL, April 20–22.
   Google Scholar
• Figliola, R., and Beasley, D. 2000. Theory and Design for Mechanical Measurements, John Wiley & Sons, Inc., New York.
   Google Scholar
• Foster, D.E. 1985. An overview of zero-dimensional thermodynamic models for IC engine data analysis. SAE Technical Paper 852070.
   Google Scholar
• Hendricks, T.L., Splitter, D.A., and Ghandhi, J.B. 2014. Experimental investigation of piston heat transfer under conventional diesel and reactivity-controlled compression ignition combustion regimes. Int. J. Eng. Res., 15(6), 684–705.
   Web of Science ®Google Scholar
• Henein, N.A., Kastury, A., Natti, K., and Bryzik, W. 2008. Advanced low temperature combustion (ALTC): Diesel engine performance, fuel economy and emissions. SAE Technical Paper 2008-01-0652.
   Google Scholar
• Hohenberg, G.F. 1979. Advanced approaches for heat transfer calculations. SAE Trans., 88, 2788–2806.
   Google Scholar
• Incropera, F.P., DeWitt, D.P., Bergman, T.L., and Lavine, A.S. 2007. Introduction to Heat Transfer, John Wiley & Sons, Inc., Hoboken, NJ.
   Google Scholar
• Jacobs, T.J., and Assanis, D.N. 2007. The attainment of premixed compression ignition low-temperature combustion in a compression ignition direct injection engine. Proc. Combust. Inst., 31(Part 2), 2913–2920.
   Web of Science ®Google Scholar
• Jacobs, T.J., Bohac, S.V., Assanis, D., and Szymkowicz, P.G. 2005. Lean and rich premixed compression ignition combustion in a light-duty diesel engine. SAE Int. J. Engines, 114, 382–393.
   Google Scholar
• Jaichandar, S., and Tamilporai, P. 2003. Low heat rejection engines—An overview. SAE Technical Paper 2003-01-0405.
   Google Scholar
• Khan, I.M. 1969–1970. Formation and combustion of carbon in a diesel engine. Proc. Inst. Mech. Eng., 184(Part 3J), 36–43.
   Google Scholar
• Kline, S.J., and McClintock, F.A. 1953. Describing uncertainties in single-sample experiments. Mech. Eng., 75(1), 3–8.
   Google Scholar
• Knight, B.M., Bittle, J.A., and Jacobs, T.J. 2010. Efficiency considerations of later-phased low temperature diesel combustion. Presented at the ASME Internal Combustion Engine Division 2010 Fall Technical Conference, San Antonio, TX, September 12–15.
   Google Scholar
• Liu, H., Ma, S., Zhang, Z., Zheng, Z., and Yao, M. 2015. Study of the control strategies on soot reduction under early-injection conditions on a diesel engine. Fuel, 139, 472–481.
   Web of Science ®Google Scholar
• Liu, H., Zheng, Z., Yao, M., Zhang, P., Zheng, Z., He, B., and Qi, Y. 2012. Influence of temperature and mixture stratification on HCCI combustion using chemiluminescence images and CFD analysis. Appl. Therm. Eng., 33–34, 135–143.
   Web of Science ®Google Scholar
• Mamalis, S., Babajimopoulos, A., Assanis, D., and Borgnakke, C. 2014. A modeling framework for second law analysis of low-temperature combustion engines. Int. J. Eng. Res., 15(6), 641–653.
   Web of Science ®Google Scholar
• McBride, B.J., and Gordon, S. 1992. Computer program for calculating and fitting thermodynamic functions. NASA Report No. RP-1271.
   Google Scholar
• Penny, M.A. 2014. Efficiency improvements with low heat rejection concepts applied to low temperature combustion. Master of Science, Texas A&M University, College Station, TX.
   Google Scholar
• Penny, M.A., and Jacobs, T.J. 2016. Efficiency improvements with low heat rejection concepts applied to diesel low temperature combustion. Int. J. Eng. Res. 17(6), 631–645.
   Web of Science ®Google Scholar
• Ra, Y., Reitz, R.D., and Diwakar, R. 2009. Analysis of mixing and thermal effects on low-temperature combustion in IC engine operation. Combust. Sci. Technol., 181(2), 274–309.
   Web of Science ®Google Scholar
• Reddy, C.S., Domingo, N., and R. L. Graves, R.L. 1990. Low heat rejection engine research status: Where do we go from here? SAE Technical Paper 900620.
   Google Scholar
• Singh, S., Garg, A., Gupta, A., and Permude, A. 2013. Analysis of thermal balance of diesel engine and identification of scope for waste heat recovery. SAE Technical Paper 2013-01-2744.
   Google Scholar
• Smith, L.A., Preston, W.H., Dowd, G., Taylor, O., and Wilkinson, K.M. 2009. Application of a first law heat balance method to a turbocharged automotive diesel engine. SAE Technical Paper 2009-01-2744.
   Google Scholar
• Taymaz, I. 2006. An experimental study of energy balance in low heat rejection diesel engine. Energy, 31, 364–371.
   Web of Science ®Google Scholar
• Tompkins, B.T., Esquivel, J., and Jacobs, T.J. 2009. Performance parameter analysis of a biodiesel-fuelled medium duty diesel engine. SAE Technical Paper 2009-01-0481.
   Google Scholar
• Tree, D.R., and Svensson, K.I. 2007. Soot processes in compression ignition engines. Prog. Energy Combust. Sci., 33(3), 272–309.
   Web of Science ®Google Scholar
• Tuner, M. 2009. Studying the potential efficiency of low heat rejection HCCI engines with a stochastic reactor model. SAE Paper No. 2009-24-0032. Presented at the 9th International Conference on Engines and Vehicles, Capri, Naples, Italy, September 13–19.
   Google Scholar
• Yang, C., Ma, P., Jing, F., and Tang, D. 2003. Excess molar volumes, viscosities, and heat capacities for the mixtures of ethylene glycol + water from 273.15 K to 353.15 K. J. Chem. Eng. Data, 48(4), 836–840.
   Web of Science ®Google Scholar