http://orcid.org/0000-0002-9386-3053
References
- Angrisani, G., Bizon, K., Chirone, R., Continillo, G., Fusco, G., Lombardi, S., Marra, F.S., Miccio, F., Roselli, C., Sasso, M., Solimene, R., Tariello, F., and Urciuolo, M. 2013. Development of a new concept solar-biomass cogeneration system. Energy Convers. Manag., 75, 552.
- Cardozo, E., Erlich, C., Malmquist, A., and Alejo, L. 2014. Integration of a wood pellet burner and a stirling engine to produce residential heat and power. Appl. Thermal Eng., 73 1, 671.
- Carlsen, H., Ammundsen, N., and Traerup, J. 1996. 40 kW stirling engine for solid fuel. Proc. Energy Conversion Eng. Conf., 2, 337.
- Crema, L., Alberti, F., Bertaso, A., and Bozzoli, A. 2011. Development of a pellet boiler with stirling engine for M-CHP domestic application. Energy, Sustainability and Society, 1 5.
- Jensen, N., Werling, J., Carlsen, H., and Henriksen, U.B., 2002, CHP from updraft gasifier and stirling engine. In Proceedings of 12th European Biomass Conference, Amsterdam, The Netherlands, 726.
- Katsura, S., Ohiwa, N., Ishikawa, A., Shimojima, H., Nishiyama, A., and Moriya, Y. 2008. Development of small-scale CHP plant with a wood powder-fueled stirling engine. J. Power Energy Syst., 2 5, 1221.
- Kongtragool, B., and Wongwises, S. 2006. Thermodynamic analysis of a Stirling engine including dead volumes of hot space, cold space and regenerator. Renew. Energy, 31 3, 345.
- Lane, N.W., and Beale, W.T., 1997. Micro-biomass electric power generation. Third Biomass Conference of the Americas, Montreal, Quebec, Canada, 72.
- Leu, J.H. 2010. Biomass power generation through direct integration of updraft gasifier and stirling engine combustion system. Adv. Mechanical Eng., 2, 1.
- Marra, F.S., Miccio, F., Solimene, R., Urciuolo, M., Chirone, R., Continillo, G., Lombardi, S., and Fusco, G., 2014, Setup of an integrated Stirling Engine - Fluidized Bed (SE-FB) experimental system. In Proc of 16th ISEC International Stirling Engine Conference, Bilbao, Spain, 399.
- Miccio, F. 2013. On the integration between fluidized bed and stirling engine for micro-generation. Appl. Therm Eng., 52 1, 46.
- Molerus, O., Burschka, A., and Dietz, S. 1995. Particle migration at solid surfaces and heat transfer in bubbling fluidized beds – II. Prediction Heat Transfer Bubbling Fluidized Beds. Chem. Eng. Sci., 50 5, 879.
- Nishiyama, A., Shimojima, H., Ishikawa, A., Itaya, Y., Kambara, S., Moritomi, H., and Mori, S. 2007. Fuel and emissions properties of stirling engine operated with wood powder. Fuel, 86 15, 2333.
- Oka, S.N. 2004. Fluidized Bed Combustion, New York, CRC press.
- Podesser, E. 1999. Electricity production in rural villages with a biomass stirling engine. Renew. Energy, 16 1–4, 1049.
- Sørensen, B. 2004. Renewable Energy. Its Physics Engineering, Use, Environmental Impacts, Economy and Planning Aspects, Elsevier Academic Press, Burlington, MA, USA.
- Wu, F., Chen, L., and Sun, F. 1998. Optimum performance of irreversible Stirling engine with imperfect regeneration. Energy Convers Manage., 39 8, 727.
- Yang, W.C. 2003. Handbook of Fluidization and Fluid-Particle Systems, CRC press, New York.
- Yaqi, L., Yaling, H., and Weiwei, W. 2011. Optimization of solar-powered Stirling heat engine with finite-time thermodynamics. Renew. Energy, 36, 421.