295
Views
12
CrossRef citations to date
0
Altmetric
Articles

Study on the effect of flame offset on water wall tube temperature in 600°C and 700°C ultra-supercritical boiler

, , , , &
Pages 472-490 | Received 11 Oct 2017, Accepted 17 Jul 2018, Published online: 10 Oct 2018

References

  • Beér, J. 2007. High efficiency electric power generation: The environmental role. Prog. Energy Combustion Sci., 33(2), 107–134.
  • Bugge, J., Kjær, S., and Blum, R. 2006. High-efficiency coal-fired power plants development and perspectives. Energy, 31(10–11), 1437–1445.
  • Chen, D., Fan C., Yang Y., Zhang F., and Zhu C. 2013. Study on water wall temperature and heat load distribution in 1000 MW tower-type once-through boilers. J. Chin. Soc. Power Eng., 33(5), 329–334.
  • Ebrahimi, H., Zamaniyan, A., Mohammadzadeh, J., and Khalili, A. 2013. Zonal modeling of radiative heat transfer in industrial furnaces using simplified model for exchange area calculation. Appl. Math. Model., 37(16–17), 8004–8015.
  • Fu, C., Anantharaman, R., Jordal, K, and Gundersen, T. 2015. Thermal efficiency of coal-fired power plants: From theoretical to practical assessments. Energy Convers. Manage., 105, 530–544.
  • Hurt, R., Sun, J., and Lunden, M. 1998. A Kinetic Model of Carbon Burnout in Pulverized Coal Combustion. Combust. Flame, 113(1–2), 181–197.
  • Hottel, H., and Cohen, E. 1958. Radiant heat exchange in a gas-filled enclosure: Allowance for nonuniformity of gas temperature. AIChE J., 4(1), 3–14.
  • Kobayashi, H., Howard, J., and Sarofim, A. 1977. Coal devolatilization at high temperatures. Symp. Combust., 16(1), 411– 425.
  • Metais, B., and Eckert, E. 1964. Forced, Mixed, and Free Convection Regimes. J. Heat Transfer, 86(2), 295–296.
  • Natesan, K., and Park, J. 2007. Fireside and steamside corrosion of alloys for USC plants. Int. J. Hydrogen Energy, 32(16), 3689–3697.
  • Noble, J. 1975. The zone method: Explicit matrix relations for total exchange areas. Int. J. Heat Mass Transfer, 18(2), 261–269.
  • Pan, J., Wu, G., and Yang, D. 2015. Thermal-hydraulic calculation and analysis on water wall system of 600 MW supercritical CFB boiler. Appl. Therm. Eng., 82, 225–236.
  • Park, H., Baek, S., Kim, Y., Kim, T., Kang, D., and Kim, D. 2013. Numerical and experimental investigations on the gas temperature deviation in a large scale, advanced low NOx, tangentially fired pulverized coal boiler. Fuel, 104, 641–646.
  • Qin, M., Liu, D., Wu, S., and Cao, Q. 2017. Numerical Simulations on Flow Characteristics of Flue Gas in Furnace with Four-Wall Tangential Firing. Combust. Sci. Technol., 189(12), 2135–2153.
  • Sha, L., Liu, H., Xu, L., Cao, Q., Li, Q., and Wu, S. 2012. Research on the elliptic aerodynamic field in a 1000 MW dual circle tangential firing single furnace ultra-supercritical boiler. Energy, 46(1), 364–373.
  • Shen, Y., Yang, D., Shen, Z., Xie, B., and Wang, L. 2016. Modeling and analysis of flow instability of the water wall in a 600 MW supercritical W-shaped boiler. Appl. Therm. Eng., 99, 325–333.
  • Stein-Brzozowska, G., Flórez, D., Maier, J., and Scheffknecht, G. 2013. Nickel-base superalloys for ultra-supercritical coal-fired power plants: Fireside corrosion. Laboratory studies and power plant exposures. Fuel, 108, 521–533.
  • Vellini, M., and Gambini, M. 2015. CO2 capture in advanced power plants fed by coal and equipped with OTM. Int. J. Greenhouse Gas Control, 36, 144–152.
  • Viswanathan, R., Sarver, J., and Tanzosh, J. 2006. Boiler Materials for Ultra-Supercritical Coal Power Plants-Steamside Oxidation. J. Mater. Eng. Perform., 15(3), 255–274.
  • Wang, W., Zhu, X., Bi, Q., Wu, G., and Huang, J. 2012. Heat sensitivity of vertical water wall at low mass velocity in supercritical pressure W-shaped flame boiler. Int. J. Therm. Sci., 53, 202–208.
  • Wu, T., Yan, X., Fu, H., Chen, Z., and Ye, Z. 2013. Analysis of water wall’s tube explosion in 600MW W-flame supercritical boiler. J. Changsha Univ. Sci. Technol., 10(4), 86–92.
  • Wu, W., Cai, X., Lin, S., Fu, W., and Che, D. 2007. Effect of flame kernel deviation on boiler slagging. Shanxi Electric Power, 18(12), 29–33.
  • Xu, G., Liang, F., Wu, Y., Yang, Y., Zhang, K., and Liu, W. 2015. A new proposed approach for future large-scale de-carbonization coal-fired power plants. Appl. Therm. Eng., 87, 316–327.
  • Yan, L., He, B., Yao, F., Yang, R., Pei, X., Wang, C., and Song, J. 2012. Numerical Simulation of a 600 MW Utility Boiler with Different Tangential Arrangements of Burners. Energy Fuels, 26(9), 5491–5502.
  • Yan, Y., Lu, G., and Colechin, M. 2002. Monitoring and characterisation of pulverized coal flames using digital imaging techniques. Fuel, 81(5), 647–655.
  • Yang, M., Shen, Y., Xu, H., Zhao, M., Shen, S., and Huang, K. 2015. Numerical investigation of the nonlinear flow characteristics in an ultra-supercritical utility boiler furnace. Appl. Therm. Eng., 88, 237–247.
  • Yang, Y., Guo, X., and Wang, N. 2010. Power generation from pulverized coal in China. Energy, 35(11), 4336–4348.
  • Zhang, D. 2013. Ultra-supercritical Coal Power Plants: Materials, Technologies and Optimization, Woodhead Publishing, Cambridge, UK.
  • Zheng, S., Luo, Z., Zhang, X., and Zhou, H. 2011. Distributed parameters modeling for evaporation system in a once-through coal-fired twin-furnace boiler. Int. J. Therm. Sci., 50(12), 2496–2505.
  • Zhu, X., Wang, W., and Xu, W. 2015. A study of the hydrodynamic characteristics of a vertical water wall in a 2953t/h ultra-supercritical pressure boiler. Int. J. Heat Mass Transfer, 86, 404–414.
  • Zima, W., Nowak-Ocłoń, M., and Ocłoń, P. 2015. Simulation of fluid heating in combustion chamber waterwalls of boilers for supercritical steam parameters. Energy, 92, 117–127.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.