272
Views
3
CrossRef citations to date
0
Altmetric
Articles

Thermal Effect of Oil Tank Heated by External Fire with Influence of Explosion Suppression Materials

, , , &
Pages 303-312 | Received 05 Jun 2018, Accepted 30 Dec 2018, Published online: 17 Jan 2019

References

  • Baker, W.E. 1983. Explosion Hazards and Evaluation, Elsevier Scientific Pub. Co.
  • Birk, A.M. 2008. Review of expanded aluminum products for explosion suppression in containers holding flammable liquids and gases. J. Loss Prev. Process Ind., 21(5), 493–505. doi:10.1016/j.jlp.2008.04.001
  • Birk, A.M., Poirier, D., and Davison, C. 2006. On the response of 500 gal propane tanks to a 25% engulfing fire. J. Loss Prev. Process Ind., 19(6), 527–541. doi:10.1016/j.jlp.2005.12.008
  • Bosch, C.J.H.V.D., and Weterings, R.A.P.M. 1997. Methods for the calculation of physical effects – ‘Yellow Book,’ CPR 14E. Environ. Toxicol. Chem., 4(5), 587–593.
  • Chattopadhyay, D.K., and Webster, D.C. 2009. Thermal stability and flame retardancy of polyurethanes. Prog. Polym. Sci., 34(10), 1068–1133. doi:10.1016/j.progpolymsci.2009.06.002
  • Dastidar, A.G., Amyotte, P.R., and Pegg, M.J. 1997. Factors influencing the suppression of coal dust explosions. Fuel, 76(7), 663–670. doi:10.1016/S0016-2361(97)00039-2
  • Droste, B., and Schoen, W. 1988. Full scale fire tests with unprotected and thermal insulated LPG storage tanks. J Hazard. Mater., 20, 41–54. doi:10.1016/0304-3894(88)87005-5
  • Du, Y., Zhang, P., Zhou, Y., Wu, S., Xu, J., and Li, G. 2014. Suppressions of gasoline-air mixture explosion by non-premixed nitrogen in a closed tunnel. J. Loss Prev. Process Ind., 31(2), 113–120. doi:10.1016/j.jlp.2014.07.012
  • Godoy, L.A., and Batista-Abreu, J.C. 2012. Buckling of fixed-roof aboveground oil storage tanks under heat induced by an external fire. Thin Wall Struct., 52(1), 90–101. doi:10.1016/j.tws.2011.12.005
  • Godoy, L.A., and Sosa, E.M. 2003. Localized support settlements of thin-walled storage tanks. Thin Wall Struct., 41(10), 941–955. doi:10.1016/S0263-8231(03)00043-0
  • Hemmatian, B., Planas, E., and Casal, J. 2017. Comparative analysis of BLEVE mechanical energy and overpressure modelling. Process Saf. Environ. Prot., 106, 138–149. doi:10.1016/j.psep.2017.01.007
  • Heymes, F., Aprin, L., Forestier, S., et al. 2013. Impact of a distant wildland fire on an LPG tank. Fire Saf. J., 61(5), 100–107. doi:10.1016/j.firesaf.2013.08.003
  • Krasnyansky, M. 2006. Prevention and suppression of explosions in gas-air and dust-air mixtures using powder aerosol-inhibitor. J. Loss Prev. Process Ind., 19(6), 729–735. doi:10.1016/j.jlp.2006.05.004
  • Leite, R.M., and Centeno, F.R. 2017. Effect of tank diameter on thermal behavior of gasoline and diesel storage tanks fires. J Hazard. Mater, 342, 544. doi:10.1016/j.jhazmat.2017.08.033
  • McDevitt, C.A., Chan, C.K., Steward, F.R., and Tennankore, K.N. 1990. Initiation step of boiling liquid expanding vapor explosions. J. Hazard. Mater, 25(1–2), 169–180. doi:10.1016/0304-3894(90)85076-F
  • Moodie, K., Cowley, L.T., Denny, R.B., Small, L.M., and Williams, I. 1988. Fire engulfment test of a 5 tonne LPG tank. J Hazard. Mater, 20, 55–71. doi:10.1016/0304-3894(88)87006-7
  • Mudan, K.S. 1984. Thermal radiation hazards from hydrocarbon pool fires. Prog. Energ. Combust., 10(1), 59–80. doi:10.1016/0360-1285(84)90119-9
  • Pearson, D.E., Pearson, R.A., Jiao, Y., and Park, H.K. 2017. Encapsulites, and the suppression of internal gas pressure in industrial metallurgical coke blends. Fuel, 200(15), 545–554. doi:10.1016/j.fuel.2017.04.002
  • Planas, E., Pastor, E., Casal, J., and Bonilla, J.M. 2015. Analysis of the boiling liquid expanding vapor explosion (BLEVE) of a liquefied natural gas road tanker: the Zarzalico accident. J. Loss Prev. Process Ind., 34, 127–138. doi:10.1016/j.jlp.2015.01.026
  • Pötzsch, S., Krüger, S., Sklorz, C., Borch, J., Hilse, T., and Otremba, F. 2018. The fire resistance of lightweight composite tanks depending on fire protection systems. Fire. Saf. J., 100, 118–127.
  • Rakaczky, J.A. 1975. The suppression of thermal hazards from explosions of munitions: A literature survey. Interim Memorandum report No.377. Aberdeen proving ground, Marylan.
  • Ried, R.C. 1979. Possible mechanism for pressurized liquid tank explosions or BLEVEs. Sci., 203, 1263–1265. doi:10.1126/science.203.4386.1263
  • Singh, H., and Jain, A.K. 2009. Ignition, combustion, toxicity, and fire retardancy of polyurethane foams: A comprehensive review. J. Appl. Polym. Sci., 111(2), 1115–1143.
  • Tauseef, S.M., Abbasi, T., Pompapathi, V., and Abbasi, S.A. 2018. Case studies of 28 major accidents of fires/explosions in storage tank farms in the backdrop of available codes/standards/models for safely configuring such tank farms. Process Saf. Environ. Prot., 120, 331–338. doi:10.1016/j.psep.2018.09.017
  • Thomas, P.H. 1963. The size of flames from natural fires. Ninth Symposium on Combustion, 9(1), 844–859. doi:10.1016/S0082-0784(63)80091-0
  • Wang, B., Rao, Z., Xie, Q., et al. 2017. Brief review on passive and active methods for explosion and detonation suppression in tubes and galleries. J. Loss Prev. Process Ind., 49, 280–290. doi:10.1016/j.jlp.2017.07.008
  • Wang, H.H. 2009. Analytical model for determining thermal radiance of fire plumes with implication to wildland fire. Combust. Sci. Technol., 181(2), 245–263. doi:10.1080/00102200802424609
  • Zalosh, R. 2007. Deflagration suppression using expanded metal mesh and polymer foams. J. Loss Prev. Process Ind., 20(4–6), 659–663. doi:10.1016/j.jlp.2007.04.039

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.