References
- Chao, J. K., M. G. Yu, T. X. Chu, X. F. Han, F. Teng, and P. Li. 2019. Evolution of broken coal permeability under coupling action of stress, temperature, moisture content, and pore pressure. Rock Mech. Rock Eng. 52 (8):2803–15. doi:https://doi.org/10.1007/s00603-019-01873-x.
- Deng, J., J. Y. Zhao, Y. Xiao, Y. N. Zhang, A. C. Huang, and C. M. Shu. 2017. Thermal analysis of the pyrolysis and oxidation behaviour of 1/3 coking coal. J. Therm. Anal. Calorim. 129 (3):1779–86. doi:https://doi.org/10.1007/s10973-017-6331-3.
- Deng, J., K. Wang, X. W. Zhai, H. Wen, and Y. N. Zhang. 2014. Experimental study on the effect of high ground temperature environment on coal spontaneous combustion characteristics. Saf. Coal Mines 45 (3):13–15.
- Guo, Y. T., C. H. Yang, and H. J. Mao. 2012. Mechanical properties of Jintan mine rock salt under complex stress paths. Int. J. Rock Mech. Min. Sci. 56::54–61. doi:https://doi.org/10.1016/j.ijrmms.2012.07.025.
- He, M. C., and F. Zhao. 2013. Laboratory study of unloading rate effects on rockburst. Disaster Adv. 6 (9):11–18.
- He, M. C., W. Nie, Z. Y. Zhao, and C. Cheng. 2011. Micro- and macro-fractures of coarse granite under true-triaxial unloading conditions. Min. Sci. Technol. 21 (3):389–94.
- Iwata, N., T. Sasaki, R. Yoshinaka, and K. Kurooka. 2012. Applicability of the multiple yield model for estimating the deformation of vertical rock walls during large-scale excavations. Int. J. Rock Mech. Min. Sci. 52:171–80. doi:https://doi.org/10.1016/j.ijrmms.2012.03.014.
- Jin, Y. F., J. Guo, and H. Wen. 2015. Experimental study on the high temperature lean oxygen oxidation combustion characteristic parameters of coal spontaneous combustion. J. China Coal Soc. 40:596–602.
- Li, B., Y. P. Liang, L. Zhang, and Q. L. Zou. 2019. Experimental investigation on compaction characteristics and permeability evolution of broken coal. Int. J. Rock Mech. Min. Sci. 118:63–76. doi:https://doi.org/10.1016/j.ijrmms.2019.04.001.
- Li, J. H., Z. H. Li, Y. L. Yang, C. J. Wang, and L. T. Sun. 2018. Experimental study on the effect of mechanochemistry on coal spontaneous combustion. Powder Technol. 339:102–10. doi:https://doi.org/10.1016/j.powtec.2018.08.006.
- Liu, Z., H. Yang, W. Y. Wang, W. M. Cheng, L. Xin, et al. 2018. Experimental study on the pore structure fractals and seepage characteristics of a coal sample around a borehole in coal seam water Infusionl. Transp. Porous Media 125 (2):289–309. doi:https://doi.org/10.1007/s11242-018-1119-x.
- Ma, D., X. X. Miao, Y. Wu, H. B. Bai, J. G. Wang, M. Rezania, Y. H. Huang, and H. W. Qian. 2016a. Seepage properties of crushed coal particles. J. Pet. Sci. Eng. 146:297–307. doi:https://doi.org/10.1016/j.petrol.2016.04.035.
- Ma, L., C. K. Lei, K. Wang, and Y. Guo. 2016b. Experiment study on high geo-temperature environment affected to danger of coal spontaneous combustion. Coal Sci. Tech. 44 (1):144–56.
- Ma, L., L. F. Ren, N. G. Wang, and L. Han. 2016c. Study on coal spontaneous combustion features and pre-control method of high ground temperature coal mining face in deep depth mine. Coal Sci. Tech. 44 (10):39–43.
- Ni, G. H., H. C. Xie, Z. Li, L. X. Zhuansun, and Y. Y. Niu. 2018b. Improving the permeability of coal seam with pulsating hydraulic fracturing technique: A case study in Changping coal mine, China. Process Saf. Environ. Protect. 117:565–72. doi:https://doi.org/10.1016/j.psep.2018.06.001.
- Ni, G. H., Z. Li, and H. C. Xie. 2018a. The mechanism and relief method of the coal seam water blocking effect (WBE) based on the surfactants. Powder Technol. 323:60–68. doi:https://doi.org/10.1016/j.powtec.2017.09.044.
- Pan, R. K., C. Li, M. G. Yu, Z. J. Xiao, and D. Fu. 2020a. Evolution patterns of coal micro-structure in environments with different temperatures and oxygen conditions. Fuel 261:1–9.
- Pan, R. K., J. W. Ma, S. D. Wu, W. T. Tang, M. G. Yu, and H. L. Jia. 2019. Experimental study on the effect of chemical composite additives on heat release characteristics of coal oxidation spontaneous combustion. Combust. Sci. Technol 1–16. doi:https://doi.org/10.1080/00102202.2019.1664491.
- Pan, R. K., T. Qiu, J. K. Chao, H. Y. Ma, J. Wang, and C. Li. 2020b. Thermal evolution of the oxidation characteristics of pulverized coal with different particle sizes and heating rates. Thermochim. Acta 685:1–11. doi:https://doi.org/10.1016/j.tca.2020.178516.
- Pan, Z., L. D. Connell, and M. Camilleri. 2010. Laboratory characterisation of coal permeability for primary and enhanced coalbed methane recovery. Int. J. Coal Geol. 82 (3):252–61. doi:https://doi.org/10.1016/j.coal.2009.10.019.
- Peng, K., J. Zhou, Q. Zou, and F. Yan. 2019a. Deformation characteristics of sandstones during cyclic loading and unloading with varying lower limits of stress under different confining pressures. Int. J. Fatigue. 127:82–100. doi:https://doi.org/10.1016/j.ijfatigue.2019.06.007.
- Peng, K., J. Zhou, Q. Zou, J. Zhang, and F. Wu. 2019b. Effects of stress lower limit during cyclic loading and unloading on deformation characteristics of sandstones. Constr. Build. Mater. 217::202–215. doi:https://doi.org/10.1016/j.conbuildmat.2019.04.183.
- Perera, M. S. A., P. G. Ranjith, S. K. Choi, and D. Airey. 2012. Investigation of temperature effect on permeability of naturally fractured black coal for carbon dioxide movement: An experimental and numerical study. Fuel 94:596–605. doi:https://doi.org/10.1016/j.fuel.2011.10.026.
- Qian, M. G., and J. L. Xu. 1998. Study on the “O-sharpe”circle distribution characteristics of mining-induced fractures in the overlaying strata. J. China Coal Soc. 23:466–69.
- Sargeant, J., B. Beamish, and D. Chalmers. 2009. Times to ignition analysis of new south wales.Coal operators’ conference, Univeristy of Wollongong, Australia, 254–358.
- Wu, G., and L. Zhang. 2004. Studying unloading failure characteristics of a rock mass using the disturbed state concept. Int. J. Rock Mech. Min. Sci. 41 (3):19–425. doi:https://doi.org/10.1016/j.ijrmms.2003.12.077.
- Xie, H. Q., and C. He. 2004. Study of the unloading characteristics of a rock mass using the triaxial test and damage mechanics. Int. J. Rock Mech. Min. Sci. 41 (3):74–80. doi:https://doi.org/10.1016/j.ijrmms.2004.03.022.
- Yang, S. Q., X. C. Hu, W. V. Liu, J. W. Cai, and X. H. Zhou. 2018. Spontaneous combustion influenced by surface methane drainage and its prediction by rescaled range analysis. Int. J. Min. Sci. Tech. 28 (2):215–21. doi:https://doi.org/10.1016/j.ijmst.2017.12.004.
- Zhang, L. J., Z. H. Li, W. J. He, J. H. Li, X. Y. Qi, J. Zhu, L. M. Zhao, and X. Zhang. 2018. Study on the change of organic sulfur forms in coal during low-temperature oxidation process. Fuel 222:350–61. doi:https://doi.org/10.1016/j.fuel.2018.02.157.
- Zhang, L. M., S. Gao, Z. Q. Wang, and M. Y. Ren. 2014. Analysis on deformation characteristics and energy dissipation of marble under different unloading rates. Tech Gaz. 21 (5):987–93.
- Zhang, X. P., L. N. Y. Wong, S. J. Wang, and G. Y. Han. 2011. Engineering properties of quartz mica schist. Eng. Geol. 121 (3–4):135–49. doi:https://doi.org/10.1016/j.enggeo.2011.04.020.
- Zhao, J. Y., J. Deng, T. Wang, J. J. Song, Y. N. Zhang, C. M. Shu, and Q. Zeng. 2019. Assessing the effectiveness of a high-temperature-programmed experimental system for simulating the spontaneous combustion properties of bituminous coal through thermokinetic analysis of four oxidation stages. Energy 169:587–96. doi:https://doi.org/10.1016/j.energy.2018.12.100.
- Zhao, X. G., J. Wang, M. Cai, C. Cheng, L. K. Ma, R. Su, F. Zhao, and D. J. Li. 2014. Influence of unloading rate on the strainburst characteristics of Beishan granite under true-triaxial unloading conditions. Rock Mech. Rock Eng. 47 (2):467–83. doi:https://doi.org/10.1007/s00603-013-0443-2.
- Zhou, X. P. 2005. Localization of deformation and stress–strain relation for mesoscopic heterogeneous brittle rock materials under unloading. Theor. Appl. Fract. Mech. 44 (1):27–43. doi:https://doi.org/10.1016/j.tafmec.2005.05.003.