References
- Baurle, R. A., and M. R. Gruber 1998. A study of recessed cavity flowfields for supersonic combustion applications. 36th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada. doi: https://doi.org/10.2514/6.1998-938.
- Biling, F. S. 1993. Research on supersonic combustion. J. Propul. Power. 9 (4):499–514. doi:https://doi.org/10.2514/6.1992-1.
- Bogdanoff, D. W. 1994. Advanced injection and mixing techniques for scramjet combustors. J. Propul. Power 10 (2):183–90. doi:https://doi.org/10.2514/3.23728.
- Cai, Z. 2018. Effect of cavity geometry on fuel transport and mixing processes in a scramjet combustor. Aerosp. Sci. Technol. 1:1–6. doi:https://doi.org/10.1016/j.ast.2018.07.028.
- Cheng, T. S., J. A. Wehrmeyer, R. W. Pitz, O. Jarrett, G. B. Northam. 1994. Raman measurement of mixing and finite-rate chemistry in a supersonic hydrogen-air diffusion flame. Combust. Flame 99 (1):157–73. doi:https://doi.org/10.1016/0010-2180(94)90087-6.
- Clutter, J. K. 1997. Computation of high speed reacting flows. WL-TR-1997-7059. Gainesville: Wright laboratory Univeristy of Florida.
- Curran, E. T., W. H. Heiser, and D. T. Pratt. 1996. Fluid phenomena in scramjet combustion systems. Annu. Rev. Fluid Mech. 28 (1):323–60. doi:https://doi.org/10.1146/annurev.fl.28.010196.001543.
- Curran, E. T., and S. N. B. Murthy. 2000. Scramjet Propul. AIAA. Reston: Virginia: AIAA, Inc. doi:https://doi.org/10.2514/4.866609.
- Doster, J. C. 2008. Hypermixer pylon fuel injection for scramjet combustors. PhD diss. Airforce Institute of Technology.
- Doster, J. C., P. I. King, M. R. Gruber, C. D. Carter, M. D. Ryan, K.-Y. Hsu. 2009. In-stream hypermixer fueling pylons in supersonic flow. J. Propul. Power 25 (4):885–901. doi:https://doi.org/10.2514/1.40179.
- Fallah, K. 2018. The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow. Aerosp. Sci. Technol. 1:1–7. doi:https://doi.org/10.1016/j.ast.2018.01.021.
- Ferri, A. 1973. Mixing-controlled supersonic combustion. Annu. Rev. Fluid Mech. 5 (1):301–37. doi:https://doi.org/10.1146/annurev.fl.05.010173.001505.
- Gerlinger, P., P. Stoll, M. Kindler, F. Schneider, M. Aigner. 2008. Numerical investigation of mixing and combustion enhancement in supersonic combustors by strut induced streamwise vorticity. Aerosp. Sci. Technol. 12 (2):159–68. doi:https://doi.org/10.1016/j.ast.2007.04.003.
- Goldberg, U., O. Peroomian, S. Chakravarthy, and B. Sekar. 1997. Validation of CFD++ code capability for supersonic combustor flowfields. 33rd Joint Propul. Conf. Exhibit, Seattle, WA. 1–15. doi: https://doi.org/10.2514/6.1997-3271.
- Heiser, W. H., and D. T. Pratt. 1994. Hypersonic airbreathing propulsion, AIAA education series. Ohio: AIAA, Inc. doi:https://doi.org/10.2514/4.470356.
- Jachimowski, C. J. 2018. An analytical study of the hydrogen-air reaction mechanism with application to scramjet combustion. NASA TP, NASA Langley Research Center, Hampton, VA, 2791.
- Kim, K. M., S. W. Baek, and C. Y. Han. 2004. Numerical study on supersonic combustion with cavity-based fuel injection. Int. J. Heat Mass Transf. 47 (2):271–86. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2003.07.004.
- King, P. S., R. H. Thomas, J. A. Schetz, F. S. Billig. 1991. Combined tangential-normal injection into a supersonic flow. J. Propul. Power 7 (3):420–30. doi:https://doi.org/10.2514/3.23343.
- Li, G. X., M.-B. Sun, J.-F. Yu, C.-H. Liang, Y. Liu, G.-Y. Zhao, Y.-H. Huang. 2020. Effect of injection Mach number on penetration in a supersonic crossflow. Aiaa J. 58 (3):1216–26. doi:https://doi.org/10.2514/1.J058580.
- Lorrain, P., S. Brieschenk, B. R. Capra, and R. R. Boyce. 2012. A detailed investigation of nominally 2-D radical-farming scramjet combustion. 18th AIAA/3AF Int. Space Planes and Hypersonic Syst. Technol. Conf, Tours, France. doi: https://doi.org/10.2514/6.2012-5812.
- Menter, F. R., M. Kuntz, and R. Langtry. 2003. Ten years of industrial experience with the SST turbulence model. Turbulence, Heat Mass Transf. 4:625–32 New York, Wallingford: Begell House.
- Micka, D. J., and J. F. Driscoll. 2009. Combustion characteristics of a dual-mode scramjet combustor with cavity flameholder. Proc. Combust. Inst 32 II (2):2397–404. doi:https://doi.org/10.1016/j.proci.2008.06.192.
- Nakaya, S., Y. Hikichi, Y. Nakazawa, K. Sakaki, M. Choi, M. Tsue, M. Kono, S. Tomioka. 2015. Ignition and supersonic combustion behavior of liquid ethanol in a scramjet model combustor with cavity flameholder. Proc. Combust. Inst. 35:2091–99. doi:https://doi.org/10.1016/j.proci.2014.07.023.
- Oamjee, A., and R. Sadanandan. 2019. Fuel injection location studies on pylon-cavity aided jet in supersonic crossflow. Aerosp. Sci. Technol. 92:869–80. doi:https://doi.org/10.1016/j.ast.2019.07.021.
- Oamjee, A., and R. Sadanandan. 2020. Effects of pylon geometry on mixing enhancement in a scramjet pylon-cavity flameholder. Aeronaut. J. 124 (1278):1262–80. doi:https://doi.org/10.1017/aer.2020.27.
- Peterson, D. M., R. R. Boyce, and V. Wheatley. 2013. Simulations of mixing in an inlet-fueled axisymmetric scramjet. Aiaa J. 51 (12):12. doi:https://doi.org/10.2514/1.J052480.
- Pohlman, M. R. 2009. Critical design parameters for pylon-aided gaseous fuel injection upstream of a flameholding cavity. PhD diss., Air Force Institute of Technology, Air University.
- Ukai, T., H. Zare-Behtash, E. Erdem, K. H. Lo, K. Kontis, S. Obayashi. 2014. Effectiveness of jet location on mixing characteristics inside a cavity in supersonic flow. Exp. Therm. Fluid Sci. 52:59–67. doi:https://doi.org/10.1016/j.expthermflusci.2013.08.022.
- Vikramaditya, N. S., and J. Kurian. 2009. Effect of aft wall slope on cavity pressure oscillations in supersonic flows. Aeronaut. J. 113 (1143):291–300. doi:https://doi.org/10.1017/S0001924000002967.
- Wang, Y., and W. Song. 2019. Experimental investigation of influence factors on flame holding in a supersonic combustor. Aerosp. Sci. Technol. 85:180–86. doi:https://doi.org/10.1016/j.ast.2018.12.002.
- Zhang, S., Y. Feng, Y. Jiang, J. Qin, W. Bao, J. Han, O. J. Haidn. 2016. Thermal behavior in the cracking reaction zone of scramjet cooling channels at different channel aspect ratios. Acta Astronaut. 127:41–56. doi:https://doi.org/10.1016/j.actaastro.2016.05.015.
- Zhang, X., A. Rona, and J. A. Edwards. 1998. The effect of trailing edge geometry on cavity flow oscillation driven by a supersonic shear layer. Aeronaut. J. 102 (1013):129–35. doi:https://doi.org/10.1017/S0001924000065416.
- Zhao, G., M. Sun, J. Wu, X. Cui, and H. Wang. 2019. Investigation of flame flashback phenomenon in a supersonic crossflow with ethylene injection upstream of cavity flameholder. Aerosp. Sci. Technol. 87:190–206. doi:https://doi.org/10.1016/j.ast.2019.02.018.