Experimental and Numerical Investigation of Laminar Flame Characteristics of Isooctane/air Mixtures at High Preheating Temperatures and H2O Dilution Ratios

References

• Bao, X., Y. Jiang, H. Xu, C. Wang, T. Lattimore, and L. Tang. 2017. Laminar flame characteristics of cyclopentanone at elevated temperatures. Appl. Energy 195:671–80. doi:https://doi.org/10.1016/j.apenergy.2017.03.031.
   Web of Science ®Google Scholar
• Bozza, F., V. De Bellis, P. Giannattasio, L. Teodosio, and L. Marchitto. 2017. Extension and validation of a 1D model applied to the analysis of a water injected turbocharged spark ignited engine at high loads and over a WLTP driving cycle. SAE Int. J. Engines 10:2141–53. doi:https://doi.org/10.4271/2017-24-0014.
   Google Scholar
• Bradley, D., P. H. Gaskell, and X. Gu. 1996. Burning velocities, Markstein lengths, and flame quenching for spherical methane-air flames: A computational study. Combust. Flame 104:176–98. doi:https://doi.org/10.1016/0010-2180(95)00115-8.
   Web of Science ®Google Scholar
• Bradley, D., R. Hicks, M. Lawes, C. Sheppard, and R. Woolley. 1998. The measurement of laminar burning velocities and Markstein numbers for iso-octane–air and iso-octane–n-heptane–air mixtures at elevated temperatures and pressures in an explosion bomb. Combust. Flame 115:126–44. doi:https://doi.org/10.1016/S0010-2180(97)00349-0.
   Web of Science ®Google Scholar
• Broustail, G., P. Seers, F. Halter, G. Moréac, and C. Mounaim-Rousselle. 2011. Experimental determination of laminar burning velocity for butanol and ethanol iso-octane blends. Fuel 90:1–6. doi:https://doi.org/10.1016/j.fuel.2010.09.021.
   Web of Science ®Google Scholar
• Burke, M. P., Z. Chen, Y. Ju, and F. L. Dryer. 2009. Effect of cylindrical confinement on the determination of laminar flame speeds using outwardly propagating flames. Combust. Flame 156:771–79. doi:https://doi.org/10.1016/j.combustflame.2009.01.013.
   Web of Science ®Google Scholar
• Cai, L., and H. Pitsch. 2015. Optimized chemical mechanism for combustion of gasoline surrogate fuels. Combust. Flame 162:1623–37. doi:https://doi.org/10.1016/j.combustflame.2014.11.018.
   Web of Science ®Google Scholar
• Chaos, M., A. Kazakov, Z. Zhao, and F. L. Dryer. 2007. A high‐temperature chemical kinetic model for primary reference fuels. Int. J. Chem. Kinet. 39:399–414. doi:https://doi.org/10.1002/kin.20253.
   Web of Science ®Google Scholar
• Chen, Z. 2011. On the extraction of laminar flame speed and Markstein length from outwardly propagating spherical flames. Combust. Flame 158:291–300. doi:https://doi.org/10.1016/j.combustflame.2010.09.001.
   Web of Science ®Google Scholar
• Chen, Z. 2015. On the accuracy of laminar flame speeds measured from outwardly propagating spherical flames: Methane/air at normal temperature and pressure. Combust. Flame 162:2442–53. doi:https://doi.org/10.1016/j.combustflame.2015.02.012.
   Web of Science ®Google Scholar
• Chen, Z., C. Tang, J. Fu, X. Jiang, Q. Li, L. Wei, and Z. Huang. 2012. Experimental and numerical investigation on diluted DME flames: Thermal and chemical kinetic effects on laminar flame speeds. Fuel 102:567–73. doi:https://doi.org/10.1016/j.fuel.2012.06.003.
   Web of Science ®Google Scholar
• Chen, Z., L. Wei, Z. Huang, H. Miao, X. Wang, and D. Jiang. 2009. Measurement of laminar burning velocities of dimethyl ether− air premixed mixtures with N2 and CO2 dilution. Energy & Fuels 23:735–39. doi:https://doi.org/10.1021/ef8008663.
   Web of Science ®Google Scholar
• Chu, H., L. Xiang, X. Nie, Y. Ya, M. Gu, and E. Jiaqiang. 2020. Laminar burning velocity and pollutant emissions of the gasoline components and its surrogate fuels: A review. Fuel 269:117451. doi:https://doi.org/10.1016/j.fuel.2020.117451.
   Web of Science ®Google Scholar
• Curran, H. J., P. Gaffuri, W. J. Pitz, and C. K. Westbrook. 2002. A comprehensive modeling study of iso-octane oxidation. Combust. Flame 129:253–80. doi:https://doi.org/10.1016/S0010-2180(01)00373-X.
   Web of Science ®Google Scholar
• De Bellis, V., F. Bozza, L. Teodosio, and G. Valentino. 2017. Experimental and Numerical Study of the Water Injection to Improve the Fuel Economy of a Small Size Turbocharged SI Engine. SAE Int. J. Engines 10:550–61. doi:https://doi.org/10.4271/2017-01-0540.
   Google Scholar
• Dirrenberger, P., P. A. Glaude, R. Bounaceur, H. Le Gall, A. P. da Cruz, A. A. Konnov, and F. Battin-Leclerc. 2014. Laminar burning velocity of gasolines with addition of ethanol. Fuel 115:162–69. doi:https://doi.org/10.1016/j.fuel.2013.07.015.
   Web of Science ®Google Scholar
• Endouard, C., F. Halter, C. Chauveau, and F. Foucher. 2016. Effects of CO2, H2O, and exhaust gas recirculation dilution on laminar burning velocities and Markstein lengths of iso-octane/air mixtures. Combust. Sci. Technol. 188:516–28. doi:https://doi.org/10.1080/00102202.2016.1138792.
   Web of Science ®Google Scholar
• Falfari, S., G. M. Bianchi, G. Cazzoli, C. Forte, and S. Negro. 2018. Basics on water injection process for gasoline engines. Energy Procedia 148:50–57. doi:https://doi.org/10.1016/j.egypro.2018.08.018.
   Google Scholar
• Frankel, M., and G. Sivashinsky. 1983. On effects due to thermal expansion and Lewis number in spherical flame propagation. Combust. Sci. Technol. 31:131–38. doi:https://doi.org/10.1080/00102208308923635.
   Web of Science ®Google Scholar
• Gülder, Ö. L. 1982. Laminar burning velocities of methanol, ethanol and isooctane-air mixtures. Symp. (Int.) Combust. 19: 275–281. doi:https://doi.org/10.1016/S0082-0784(82)80198-7
   Google Scholar
• Halter, F., F. Foucher, L. Landry, and C. Mounaimrousselle. 2009. Effect of dilution by nitrogen and/or carbon dioxide on methane and iso-octane air flames. Combust. Sci. Technol. 181:813–27. doi:https://doi.org/10.1080/00102200902864662.
   Web of Science ®Google Scholar
• Halter, F., T. Tahtouh, and C. Mounaïm-Rousselle. 2010. Nonlinear effects of stretch on the flame front propagation. Combust. Flame 157:1825–32. doi:https://doi.org/10.1016/j.combustflame.2010.05.013.
   Web of Science ®Google Scholar
• Hoppe, F., M. Thewes, H. Baumgarten, and J. Dohmen. 2016. Water injection for gasoline engines: Potentials, challenges, and solutions. Int. J. Engine Res. 17:86–96. doi:https://doi.org/10.1177/1468087415599867.
   Google Scholar
• Hu, E., J. Ku, G. Yin, C. Li, X. Lu, and Z. Huang. 2018. Laminar flame characteristics and kinetic modeling study of ethyl tertiary butyl ether compared with methyl tertiary butyl ether, ethanol, iso-octane, and gasoline. Energy & Fuels 32:3935–49. doi:https://doi.org/10.1021/acs.energyfuels.7b03636.
   Google Scholar
• Hu, E., X. Jiang, Z. Huang, and N. Iida. 2012. Numerical study on the effects of diluents on the laminar burning velocity of methane–air mixtures. Energy & Fuels 26:4242–52. doi:https://doi.org/10.1021/ef300535s.
   Google Scholar
• Hu, E., Z. Xu, Z. Gao, J. Xu, and Z. Huang. 2019. Experimental and numerical study on laminar burning velocity of gasoline and gasoline surrogates. Fuel 256:115933. doi:https://doi.org/10.1016/j.fuel.2019.115933.
   Web of Science ®Google Scholar
• Huang, Z., Y. Zhang, K. Zeng, B. Liu, Q. Wang, and D. Jiang. 2006. Measurements of laminar burning velocities for natural gas–hydrogen–air mixtures. Combust. Flame 146:302–11. doi:https://doi.org/10.1016/j.combustflame.2006.03.003.
   Web of Science ®Google Scholar
• Jerzembeck, S., N. Peters, P. Pepiotdesjardins, and H. Pitsch. 2009. Laminar burning velocities at high pressure for primary reference fuels and gasoline: Experimental and numerical investigation. Combust. Flame 156:292–301. doi:https://doi.org/10.1016/j.combustflame.2008.11.009.
   Web of Science ®Google Scholar
• Jiang, Y., H. Xu, X. Ma, X. Bao, and B. Wang. 2017. Laminar burning characteristics of 2-MTHF compared with ethanol and isooctane. Fuel 190:10–20. doi:https://doi.org/10.1016/j.fuel.2016.11.036.
   Google Scholar
• Kelley, A. P., and C. K. Law. 2009. Nonlinear effects in the extraction of laminar flame speeds from expanding spherical flames. Combust. Flame 156 (9):1844–51. doi:https://doi.org/10.1016/j.combustflame.2009.04.004.
   Web of Science ®Google Scholar
• Kumar, K., J. Freeh, C. Sung, and Y. Huang. 2007. Laminar flame speeds of preheated iso-octane/O2/N2 and n-heptane/O2/N2 mixtures. J. Propul. Power 23 (2):428–36. doi:https://doi.org/10.2514/1.24391.
   Web of Science ®Google Scholar
• Lamoureux, N., N. Djebaı̈li-Chaumeix, and C.-E. Paillard. 2003. Laminar flame velocity determination for H2–air–He–CO2 mixtures using the spherical bomb method. Exp. Therm Fluid Sci. 27 (4):385–93. doi:https://doi.org/10.1016/S0894-1777(02)00243-1.
   Google Scholar
• Law, C. K., C. J. Sung, H. Wang, and T. Lu. 2003. Development of comprehensive detailed and reduced reaction mechanisms for combustion modeling. Aiaa J. 41 (9):1629–46. doi:https://doi.org/10.2514/2.7289.
   Google Scholar
• Le Cong, T., and P. Dagaut. 2009. Experimental and detailed modeling study of the effect of water vapor on the kinetics of combustion of hydrogen and natural gas, impact on NO x. Energy & Fuels 23 (2):725–34. doi:https://doi.org/10.1021/ef800832q.
   Google Scholar
• Li, X., E. Hu, X. Meng, X. Lu, and Z. Huang. 2017. High-temperature oxidation kinetics of iso-octane/n-butanol blends-air mixture. Energy 133:443–54. doi:https://doi.org/10.1016/j.energy.2017.05.111.
   Google Scholar
• Li, Z., W. Han, D. Liu, and Z. Chen. 2015. Laminar flame propagation and ignition properties of premixed iso-octane/air with hydrogen addition. Fuel 158:443–50. doi:https://doi.org/10.1016/j.fuel.2015.05.070.
   Web of Science ®Google Scholar
• Liang, J., G. Li, Z. Zhang, Z. Xiong, F. Dong, and R. Yang. 2014. Experimental and numerical studies on laminar premixed flames of ethanol–water–air mixtures. Energy & Fuels 28 (7):4754–61. doi:https://doi.org/10.1021/ef4024178.
   Google Scholar
• Lieuwen, T., V. Yang, and R. Yetter. 2009. Synthesis gas combustion: Fundamentals and applications. Florida, CRC press
   Google Scholar
• Liu, D., J. Santner, C. Togbé, D. Felsmann, J. Koppmann, A. Lackner, X. Yang, X. Shen, Y. Ju, and K. Kohse-Höinghaus. 2013. Flame structure and kinetic studies of carbon dioxide-diluted dimethyl ether flames at reduced and elevated pressures. Combust. Flame 160 (12):2654–68. doi:https://doi.org/10.1016/j.combustflame.2013.06.032.
   Google Scholar
• Medina, A., P. L. Curto-Risso, A. C. Hernández, L. Guzmán-Vargas, F. Angulo-Brown, and A. K. Sen. 2014. Quasi-dimensional simulation of spark ignition engines. Thermodynamic optimization to cyclic variability. London, UK: Springer.
   Google Scholar
• Meng, S., S. Sun, H. Xu, Y. Guo, D. Feng, Y. Zhao, P. Wang, and Y. Qin. 2016. The effects of water addition on the laminar flame speeds of CO/H2/O2/H2O mixtures. Int. J. Hydrogen Energy 41 (25):10976–85. doi:https://doi.org/10.1016/j.ijhydene.2016.04.251.
   Google Scholar
• Metghalchi, M., and J. C. Keck. 1982. Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperature. Combust. Flame 48:191–210. doi:https://doi.org/10.1016/0010-2180(82)90127-4.
   Web of Science ®Google Scholar
• Netzer, C., T. Franken, L. Seidel, H. Lehtiniemi, and F. Mauss. 2018. Numerical analysis of the impact of water injection on combustion and thermodynamics in a gasoline engine using detailed chemistry. SAE Int. J. Engines 11 (6):1151–66. doi:https://doi.org/10.4271/2018-01-0200.
   Google Scholar
• Rau, F., S. Hartl, and C. Hasse. 2019. Numerical and experimental investigation of the laminar burning velocity of biofuels at atmospheric and high-pressure conditions. Fuel 247:250–56. doi:https://doi.org/10.1016/j.fuel.2019.03.024.
   Google Scholar
• Singh, D., T. Nishiie, S. Tanvir, and L. Qiao. 2012. An experimental and kinetic study of syngas/air combustion at elevated temperatures and the effect of water addition. Fuel 94:448–56. doi:https://doi.org/10.1016/j.fuel.2011.11.058.
   Web of Science ®Google Scholar
• Wang, J., Y. Xie, X. Cai, Y. Nie, C. Peng, and Z. Huang. 2016. Effect of H2O addition on the flame front evolution of syngas spherical propagation flames. Combust. Sci. Technol. 188 (7):1054–72. doi:https://doi.org/10.1080/00102202.2016.1145118.
   Web of Science ®Google Scholar
• Xie, Y., J. Wang, N. Xu, S. Yu, M. Zhang, and Z. Huang. 2014. Thermal and chemical effects of water addition on laminar burning velocity of syngas. Energy & Fuels 28 (5):3391–98. doi:https://doi.org/10.1021/ef4020586.
   Google Scholar
• Xu, H., F. Liu, S. Sun, S. Meng, and Y. Zhao. 2019. A systematic numerical study of the laminar burning velocity of iso-octane/syngas/air mixtures. Chem Eng Sci 195:598–608. doi:https://doi.org/10.1016/j.ces.2018.10.002.
   Google Scholar
• Yu, H., W. Han, J. Santner, X. Gou, C. H. Sohn, Y. Ju, and Z. Chen. 2014. Radiation-induced uncertainty in laminar flame speed measured from propagating spherical flames. Combust. Flame 161 (11):2815–24. doi:https://doi.org/10.1016/j.combustflame.2014.05.012.
   Web of Science ®Google Scholar
• Zhang, Z., J. Xiong, J. Liang, H. Zhang, and G. Li. 2019. Effect of water content on premixed laminar flames of hydrous acetone–n-butanol–ethanol (ABE)–air mixtures: An experimental and numerical study. Fuel 254:115625. doi:https://doi.org/10.1016/j.fuel.2019.115625.
   Google Scholar
• Zhou, M., G. Li, Z. Zhang, J. Liang, and L. Tian. 2017. Effect of ignition energy on the initial propagation of ethanol/air laminar premixed flames: An experimental study. Energy & Fuels 31 (9):10023–31. doi:https://doi.org/10.1021/acs.energyfuels.7b00965.
   Google Scholar
• Zhu, S., B. Hu, S. Akehurst, C. Copeland, A. Lewis, H. Yuan, I. Kennedy, J. Bernards, and C. Branney. 2019. A review of water injection applied on the internal combustion engine. Energy Convers. Manage. 184:139–58. doi:https://doi.org/10.1016/j.enconman.2019.01.042.
   Web of Science ®Google Scholar