Production of Liquid Fuel from Polystyrene Waste: Process Optimization and Characterization of Pyrolyzates

References

• Abdullah, M., and K. Khairurrijal. 2009. Derivation of Scherrer relation using an approach in basic physics course. J. Nano. Nanotek. 1:28–32.
   Google Scholar
• Aboulkas, A. 2010. Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanisms. Energy Conver. Manag. 51 (7):1363–69. doi:10.1016/j.enconman.2009.12.017.
   Web of Science ®Google Scholar
• Ali, S., A. Garforth, D. Harris, D. Rawlence, and Y. Uemichi. 2002. Polymer waste recycling over “used” catalysts. Catal. Today 75 (1–4):247–55. doi:10.1016/S0920-5861(02)00076-7.
   Web of Science ®Google Scholar
• Aljabri, N. M., Z. Lai, N. Hadjichristidis, and K.-W. Huang. 2017. Renewable aromatics from the degradation of polystyrene under mild conditions. J. Saudi Chem. Soci. 21 (8):983–89. doi:10.1016/j.jscs.2017.05.005.
   Web of Science ®Google Scholar
• ASTM. 1979. Annual book of ASTM standard part 23. Philadelphia, PA: American Society of Testing Materials.
   Google Scholar
• Bharadwaj, A. S., S. Niju, K. Meera Sheriffa Begum, and A. Narayanan. 2020. Performance and evaluation of calcined limestone as catalyst in biodiesel production from high viscous nonedible oil. Environ. Prog. Sustain. Energy 39 (3):e13342. doi:10.1002/ep.13342.
   Web of Science ®Google Scholar
• Bosica, G., R. Abdilla, and K. Demanuele. 2018. Revisiting the Betti synthesis: Using a cheap, readily available, recyclable clay catalyst under solventless conditions. Europ. J. Organ. Chem. 2018 (44):6127–33. doi:10.1002/ejoc.201800826.
   Web of Science ®Google Scholar
• Cho, K.-H., D.-R. Cho, K.-H. Kim, and D.-W. Park. 2007. Catalytic degradation of polystyrene using albite and montmorillonite. Korean J. Chem. Engin. 24 (2):223–25. doi:10.1007/s11814-007-5048-6.
   Web of Science ®Google Scholar
• Feng, J., X. Hu, and P. L. Yue. 2004. Novel bentonite clay-based Fe− nanocomposite as a heterogeneous catalyst for photo-fenton discoloration and mineralization of Orange II. Environ.Sci.Technol. 38 (1):269–75. doi:10.1021/es034515c.
   PubMed Web of Science ®Google Scholar
• Filip, M., A. Pop, I. Perhaiţa, M. Moldovan, and R. Truşcă. 2013. Investigation of thermal and catalytic degradation of polystyrene waste into styrene monomer over natural volcanic tuff and Florisil catalysts. Open Chem. 11 (5):725–35. doi:10.2478/s11532-013-0202-y.
   Google Scholar
• Fuentes-Ordóñez, E. G., J. A. Salbidegoitia, M. P. González-Marcos, and J. R. González-Velasco. 2016. Mechanism and kinetics in catalytic hydrocracking of polystyrene in solution. Polym.Degrad.Stab. 124:51–59. doi:10.1016/j.polymdegradstab.2015.12.009.
   Web of Science ®Google Scholar
• Gautam, S. K., B. Sapkota, A. Bhujel, and S. Bhattarai. 2020. Estimation of particle size and band gap of zinc oxide nanoparticle synthesized by chemical precipitation method. J. Nepal Chem. Soci. 41 (1):46–50. doi:10.3126/jncs.v41i1.30448.
   Google Scholar
• Houben, M., G. Desbois, and J. Urai. 2014. A comparative study of representative 2D microstructures in shaly and sandy facies of Opalinus clay (Mont Terri, Switzerland) inferred form BIB-SEM and MIP methods. Marin. Petrol. Geo. 49:143–61. doi:10.1016/j.marpetgeo.2013.10.009.
   Web of Science ®Google Scholar
• Huang, W.-C., M.-S. Huang, C.-F. Huang, -C.-C. Chen, and K.-L. Ou. 2010. Thermochemical conversion of polymer wastes into hydrocarbon fuels over various fluidizing cracking catalysts. Fuel 89 (9):2305–16. doi:10.1016/j.fuel.2010.04.013.
   Web of Science ®Google Scholar
• IP. 1993. Standards for petroleum and its products, part I. London: Institute of Petroleum.
   Google Scholar
• Khan, M. A., J. Nisar, M. Iqbal, A. Shah, R. A. Khan, and I. A. Bhatti. 2019. Pyrolysis of polypropylene over a LZ-Y52 molecular sieve: Kinetics and the product distribution. Iran. Polym. J. 28 (10):839–47. doi:10.1007/s13726-019-00747-x.
   Web of Science ®Google Scholar
• Kim, J.-R., J.-H. Yoon, and D.-W. Park. 2002. Catalytic recycling of the mixture of polypropylene and polystyrene. Polym.Degrad.Stab. 76 (1):61–67. doi:10.1016/S0141-3910(01)00266-X.
   Web of Science ®Google Scholar
• Kim, J.-S., W.-Y. Lee, S.-B. Lee, S.-B. Kim, and M.-J. Choi. 2003. Degradation of polystyrene waste over base promoted Fe catalysts. Catal. Today 87 (1–4):59–68. doi:10.1016/j.cattod.2003.10.004.
   Web of Science ®Google Scholar
• Lee, K.-H., N.-S. Noh, D.-H. Shin, and Y. Seo. 2002. Comparison of plastic types for catalytic degradation of waste plastics into liquid product with spent FCC catalyst. Polym.Degrad.Stab. 78 (3):539–44. doi:10.1016/S0141-3910(02)00227-6.
   Web of Science ®Google Scholar
• Lee, S., J. Yoon, J. Kim, and D. Park. 2001. Catalytic degradation of polystyrene over natural clinoptilolite zeolite. Polym.Degrad.Stab. 74 (2):297–305. doi:10.1016/S0141-3910(01)00162-8.
   Web of Science ®Google Scholar
• Liu, M., J. K. Zhuo, S. J. Xiong, and Q. Yao. 2014. Catalytic degradation of high-density polyethylene over a clay catalyst compared with other catalysts. Energy Fuels 28 (9):6038–45. doi:10.1021/ef501326k.
   Web of Science ®Google Scholar
• Liu, Y., J. Qian, and J. Wang. 2000. Pyrolysis of polystyrene waste in a fluidized-bed reactor to obtain styrene monomer and gasoline fraction. Fuel Processing Technology 63 (1):45–55. doi:10.1016/S0378-3820(99)00066-1.
   Web of Science ®Google Scholar
• López, A., I. De Marco, B. Caballero, M. Laresgoiti, A. Adrados, and A. Aranzabal. 2011. Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud. Appl. Catal. B: Environ. 104 (3–4):211–19. doi:10.1016/j.apcatb.2011.03.030.
   Web of Science ®Google Scholar
• Luo, G., T. Suto, S. Yasu, and K. Kato. 2000. Catalytic degradation of high density polyethylene and polypropylene into liquid fuel in a powder-particle fluidized bed. Polym.Degrad.Stab. 70 (1):97–102. doi:10.1016/S0141-3910(00)00095-1.
   Web of Science ®Google Scholar
• Ma, C., J. Yu, B. Wang, Z. Song, J. Xiang, S. Hu, S. Su, and L. Sun. 2017. Catalytic pyrolysis of flame retarded high impact polystyrene over various solid acid catalysts. Fuel Proces. Technol. 155:32–41. doi:10.1016/j.fuproc.2016.01.018.
   Web of Science ®Google Scholar
• Miandad, R., M. Barakat, A. S. Aburiazaiza, M. Rehan, I. Ismail, and A. Nizami. 2017. Effect of plastic waste types on pyrolysis liquid oil. Int. Biodeterio., Biodegrad. 119:239–52. doi:10.1016/j.ibiod.2016.09.017.
   Web of Science ®Google Scholar
• Miskolczi, N., L. Bartha, and G. Deák. 2006. Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks. Polym.Degrad.Stab. 91 (3):517–26. doi:10.1016/j.polymdegradstab.2005.01.056.
   Web of Science ®Google Scholar
• Murata, K., Y. Hirano, Y. Sakata, and M. A. Uddin. 2002. Basic study on a continuous flow reactor for thermal degradation of polymers. J. Anal. Appl. Pyrol. 65 (1):71–90. doi:10.1016/S0165-2370(01)00181-4.
   Web of Science ®Google Scholar
• Nisar, J., G. Ali, A. Shah, M. Iqbal, R. A. Khan, F. Anwar, R. Ullah, and M. S. Akhter. 2019a. Fuel production from waste polystyrene via pyrolysis: Kinetics and products distribution. Waste Manag. 88:236–47.
   PubMed Web of Science ®Google Scholar
• Nisar, J., G. Ali, A. Shah, M. R. Shah, M. Iqbal, M. N. Ashiq, and H. N. Bhatti. 2019b. Pyrolysis of expanded waste polystyrene: Influence of nickel-doped copper oxide on kinetics, thermodynamics, and product distribution. Energy Fuels 33 (12):12666–78. doi:10.1021/acs.energyfuels.9b03004.
   Web of Science ®Google Scholar
• Nisar, J., M. A. Khan, G. Ali, M. Iqbal, A. Shah, M. R. Shah, S. T. H. Sherazi, L. A. Shah, and N. U. Rehman. 2019c. Pyrolysis of polypropylene over zeolite mordenite ammonium: Kinetics and products distribution. J. Polym. Engin. 39 (9):785–93. doi:10.1515/polyeng-2019-0077.
   Web of Science ®Google Scholar
• Nisar, J., M. S. Khan, G. Ali, A. Shah, R. A. Khan, F. Shah, Sirajuddin, S. T. H. Sherazi, and M. Iqbal. 2019d. Pyrolysis of polystyrene: The influence of commercially available oxides as catalysts. J, Chem. Soci. Pak. 41:779–87.
   Web of Science ®Google Scholar
• Njopwouo, D., G. Roques, and R. Wandji. 1987. A contribution to the study of the catalytic action of clays on the polymerization of styrene: I. Characterization of Polystyrenes. Clay Miner 22:45.
   Web of Science ®Google Scholar
• Ojha, D. K., and R. Vinu. 2015. Resource recovery via catalytic fast pyrolysis of polystyrene using zeolites. J. Anal. Appl. Pyrol. 113:349–59. doi:10.1016/j.jaap.2015.02.024.
   Web of Science ®Google Scholar
• Olutoye, M., and B. Hameed. 2013. A highly active clay-based catalyst for the synthesis of fatty acid methyl ester from waste cooking palm oil. Appl Catal. A: General 450:57–62. doi:10.1016/j.apcata.2012.09.049.
   Web of Science ®Google Scholar
• Onwudili, J. A., N. Insura, and P. T. Williams. 2009. Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time. J. Anal. Appl. Pyrol. 86 (2):293–303. doi:10.1016/j.jaap.2009.07.008.
   Web of Science ®Google Scholar
• Pinto, F., P. Costa, I. Gulyurtlu, and I. Cabrita. 1999. Pyrolysis of plastic wastes: 2. Effect of catalyst on product yield. J. Anal. Appl. Pyrol. 51 (1–2):57–71. doi:10.1016/S0165-2370(99)00008-X.
   Web of Science ®Google Scholar
• Qoniah, I., D. Prasetyoko, H. Bahruji, S. Triwahyono, A. A. Jalil, and T. E. Purbaningtias. 2015. Direct synthesis of mesoporous aluminosilicates from Indonesian kaolin clay without calcination. Appl. Clay Sci. 118:290–94. doi:10.1016/j.clay.2015.10.007.
   Web of Science ®Google Scholar
• Senneca, O., R. Chirone, and P. Salatino. 2002. A thermogravimetric study of nonfossil solid fuels. 2. Oxidative pyrolysis and char combustion. Energy Fuels 16 (3):661–68. doi:10.1021/ef0102061.
   Web of Science ®Google Scholar
• Serrano, D., and J. Aguado. 2000. Catalytic conversion of polystyrene over HMCM-41, HZSM-5 and amorphous SiO2–Al2O3: Comparison with thermal cracking. Appl. Catal. B: Environ. 25 (2–3):181–89. doi:10.1016/S0926-3373(99)00130-7.
   Web of Science ®Google Scholar
• Simić, V., and P. Uhlík. 2006. Crystallite size distribution of clay minerals from selected Serbian clay deposits. In Geoloski balkanskoga poluostrva, 109–16.
   Google Scholar
• Songip, A. R., T. Masuda, H. Kuwahara, and K. Hashimoto. 1994. Kinetic studies for catalytic cracking of heavy oil from waste plastics over REY zeolite. Energy Fuels 8 (1):131–35. doi:10.1021/ef00043a022.
   Web of Science ®Google Scholar
• Tae, J.-W., B.-S. Jang, J.-R. Kim, I. Kim, and D.-W. Park. 2004. Catalytic degradation of polystyrene using acid-treated halloysite clays. Solid State Ionics 172 (1–4):129–33. doi:10.1016/j.ssi.2004.05.013.
   Web of Science ®Google Scholar
• Ukei, H., T. Hirose, S. Horikawa, Y. Takai, M. Taka, N. Azuma, and A. Ueno. 2000. Catalytic degradation of polystyrene into styrene and a design of recyclable polystyrene with dispersed catalysts. Catal. Today 62 (1):67–75. doi:10.1016/S0920-5861(00)00409-0.
   Web of Science ®Google Scholar
• Villegas, R. A., E. Santo Jr, M. Mattos, M. R. de Aguiar, and A. W. Guarino. 2005. Characterization of natural Brazilian clays and their utilization as catalysts in the coiodination of alkenes with water and alcohols. J. Brazilian Chem. Soci 16 (3b):565–70. doi:10.1590/S0103-50532005000400012.
   Web of Science ®Google Scholar
• Walendziewski, J. 2005. Continuous flow cracking of waste plastics. Fuel Proces. Technol. 86 (12–13):1265–78. doi:10.1016/j.fuproc.2004.12.004.
   Web of Science ®Google Scholar
• Walendziewski, J., and M. Steininger. 2001. Thermal and catalytic conversion of waste polyolefines. Catal. Today 65 (2–4):323–30. doi:10.1016/S0920-5861(00)00568-X.
   Web of Science ®Google Scholar
• Yusuff, A. S., L. T. Popoola, and E. I. Aderibigbe. 2020. Solar photocatalytic degradation of organic pollutants in textile industry wastewater by ZnO/pumice composite photocatalyst. J. Environ. Chem. Engin. 8 (4):103907. doi:10.1016/j.jece.2020.103907.
   Web of Science ®Google Scholar