24
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Study on the Mechanical Degradation and Destruction Characteristics of Coal Oxidation

, , , , &
Received 08 Dec 2023, Accepted 28 Feb 2024, Published online: 07 Mar 2024

References

  • Asadizadeh, M., M. F. Hossaini, M. Moosavi, H. Masoumi, and P. G. Ranjith. 2019. Mechanical characterisation of jointed rock-like material with non-persistent rough joints subjected to uniaxial compression. Eng. Geol. 260:260. doi:10.1016/j.enggeo.2019.105224.
  • Cai, C., G. Li, Z. Huang, S. Tian, Z. Shen, and X. Fu. 2015. Experiment of coal damage due to super-cooling with liquid nitrogen. J. Nat. Gas Sci. Eng. 22:42–48. doi:10.1016/j.jngse.2014.11.016.
  • Cai, Y. D., D. M. Liu, Y. B. Yao, J. Q. Li, and J. L. Liu. 2011. Fractal characteristics of coal pores based on classic geometry and thermodynamics models. Acta Geol. Sin-Engl. Ed. 85 (5):1150–62. doi:10.1111/j.1755-6724.2011.00247.x.
  • Cao, A., G. Jing, Y. Ding, and S. Liu. 2019. Mining-induced static and dynamic loading rate effect on rock damage and acoustic emission characteristic under uniaxial compression. Saf. Sci. 116:86–96. doi:10.1016/j.ssci.2019.03.003.
  • Chao, J. K. S. Liu, R. K. Pan, Y. F. Yuan, and D. M. Hu. 2024. Study on the thermal effect of coal oxidation under different stresses. Sci. Total Environ. 915:169843. doi:10.1016/j.scitotenv.2023.169843.
  • Chen, X., X. Shi, Y. Zhang, Y. Zhang, and Q. Ma. 2023. Numerical simulation study on coal spontaneous combustion: Effect of porosity distribution. Combust. Sci. Technol. 195 (3):472–493. doi:10.1080/00102202.2021.1961760.
  • Dong, X., Z. Wen, F. Wang, and Y. Meng. 2019. Law of gas production during coal heating oxidation. Int. J. Min. Sci. Technol. 29 (4):617–620. doi:10.1016/j.ijmst.2019.06.011.
  • Gong, S., C. Wang, F. Xi, Y. Jia, L. Zhou, H. Zhang, J. Wang, X. Ren, S. Wang, S. Yao, et al. 2022. Dynamic tensile mechanical properties of outburst coal considering bedding effect and evolution characteristics of strain energy density. Math. (Basel) 10(21):10. doi:10.3390/math10214120.
  • Guo, W., D. Zhang, T. Zhao, Y. Li, Y. Zhao, C. Wang, and W. Wu. 2022. Influence of rock strength on the mechanical characteristics and energy evolution law of gypsum–rock combination specimen under cyclic loading–unloading condition. Int. J. Geomech 22 (5). doi:10.1061/(ASCE)GM.1943-5622.0002276.
  • Jia, Z., H. Xie, R. Zhang, C. Li, M. Wang, M. Gao, Z. Zhang, and Z. Zhang. 2020. Acoustic emission characteristics and damage evolution of coal at different depths under triaxial compression. Rock Mech. Rock Eng 53 (5):2063–76. doi:10.1007/s00603-019-02042-w.
  • Liu, Z., H. Wang, and B. Zhou. 2022. Effect of natural defects on the fracture behaviors and failure mechanism of basalt through mesotesting and fdem modeling. Eng. Fract. Mech. 271:271. doi:10.1016/j.engfracmech.2022.108598.
  • Li, C., Y. Xu, P. Chen, H. Li, and P. Lou. 2020. Dynamic mechanical properties and fragment fractal characteristics of fractured coal–rock-Like combined bodies in split Hopkinson pressure bar tests. Nat. Resour. Res. 29 (5):3179–95. doi:10.1007/s11053-020-09656-w.
  • Lu, Y., Y. Kang, M. Chen, L. You, Y. Tu, and J. Liu. 2021. Investigation of oxidation and heat treatment to improve mass transport ability in coals. Fuel. (Lond). 283:283. doi:10.1016/j.fuel.2020.118840.
  • Lu, X., M. Wang, X. Xue, Y. Xing, G.-Y. Shi, C. Shen, Y.-C. Yang, and Y.-B. Li. 2022. An novel experimental study on the thermorunaway behavior and kinetic characteristics of oxidation coal in a low temperature reoxidation process. Fuel. (Lond). 310:310. doi:10.1016/j.fuel.2021.122162.
  • Man-Chao, H. E., X. I. E. He-Ping, P. E. N. G. Su-Ping, and J. I. A. N. G. Yao-Dong. 2005. Study on rock mechanics in deep mining engineering. Chin. J. Rock Mech. Eng. 2803–13.
  • Pan, R., D. Hu, X. Han, J. Chao, and H. Jia. 2023. Analysis of the wetting and exothermic properties of preoxidized coal and the microscopic mechanism. Energy (Oxf) 271:271. doi:10.1016/j.energy.2023.127013.
  • Pan, R., Z. Ma, M. Yu, J. Chao, Z. Ma, H. Jia, and C. Li. 2021. Mechanical properties of spontaneous combustion coal oxidation. J. China Coal Soc. 46:2949–64.
  • Pan, R., Z. Ma, M. Yu, C. Su, and J. Chao. 2022. An investigation on the bursting liability of oxidized coal and the coupling mechanism of rock burst and spontaneous combustion. Rock Mech. Rock Eng 55 (1):317–340. doi:10.1007/s00603-021-02649-y.
  • Pan, R., W. Tang, S. Wu, J. Ma, D. Fu, and H. Jia. 2021. A study on the spontaneous combustion oxidation properties of unloaded coal at various surrounding rock temperatures. Combust. Sci. Technol. 193 (9):1623–1637. doi:10.1080/00102202.2019.1704742.
  • Pan, R., C. Wang, J. Chao, H. Jia, and J. Wang. 2022. Experimental research on the characteristics of the secondary oxidation heat of different unloaded coals. Fuel. (Lond). 307:307. doi:10.1016/j.fuel.2021.121939.
  • Sun, S., H. Sun, Y. Wang, J. Wei, J. Liu, and D. P. Kanungo. 2014. Effect of the combination characteristics of rock structural plane on the stability of a rock - mass slope. Bull. Eng. Geol. Environ. 73 (4):987–995. doi:10.1007/s10064-014-0593-9.
  • Teng, F., M. Yu, J. Chao, and Z. Ma. 2022. Coal pillar’s breaking and fracture development mechanism and numerical simulation. Therm. Sci. 26 (3 Part B):2439–2446. doi:10.2298/TSCI2203439T.
  • Tian, B., S. Liu, Y. Zhang, and Z. Wang. 2016. Analysis of fractal characteristic of fragments from rock burst tests under different loading rates. Teh. Vjesn. 23:1269–76. doi:10.17559/TV-20160815152017.
  • Wang, G., Y. Qin, J. Shen, S. Chen, B. Han, and X. Zhou. 2018. Dynamic-change laws of the porosity and permeability of low - to medium-rank coals under heating and pressurization treatments in the eastern junggar basin, china. J. Earth Sci. 29 (3):607–615. doi:10.1007/s12583-017-0908-4.
  • XIE, H., G. A. O. Feng, and J. U. Yang. 2015. Research and development of rock mechanics in deep ground engineering. Chin. J. Rock Mech. Eng. 34:2161–78.
  • Xue, F. M., F. G. Li, J. Li, and M. He. 2012. Strain energy density method for estimating fracture toughness from indentation test of 0cr12mn5ni4mo3al steel with berkovich indenter. Theor. Appl. Fract. Mech. 61:66–72. doi:10.1016/j.tafmec.2012.08.008.
  • Xu, J., R. Zhou, D. Song, N. Li, K. Zhang, and D. Xi. 2019. Deformation and damage dynamic characteristics of coal–rock materials in deep coal mines. Int. J. Damage Mech. 28 (1):58–78. doi:10.1177/1056789517741950.
  • Yang, S., J. Wang, J. Ning, and P. Qiu. 2019. Experimental study on mechanical properties, failure behavior and energy evolution of different coal-rock combined specimens. Appl. Sci. (Basel) 9 (20):4427. doi:10.3390/app9204427.
  • Yao, Y., D. Liu, Y. Che, D. Tang, S. Tang, and W. Huang. 2010. Petrophysical characterization of coals by low-field nuclear magnetic resonance (nmr). Fuel. (Lond). 89 (7):1371–1380. doi:10.1016/j.fuel.2009.11.005.
  • Zhang, A., H. Xie, R. Zhang, M. Gao, J. Xie, Z. Jia, L. Ren, and Z. Zhang. 2023. Mechanical properties and energy characteristics of coal at different depths under cyclic triaxial loading and unloading. Int. J. Rock Mech. Min. Sci. 161:161. doi:10.1016/j.ijrmms.2022.105271.
  • Zheng, C., Q. Yao, C. Shan, Y. Li, X. Shang, X. Li, and J. Li. 2023. Measurement of uniaxial compression mechanical properties of thermally dried coal samples by energy and fragmentation characteristic analyses. Meas. (Lond) 207:207. doi:10.1016/j.measurement.2022.112363.
  • ZHONG, X., F. HOU, W. CAO, Q. ZHONG, and D. ZHU. 2021. Testing approach of self-heating kinetic parameters of coal oxidation based on iso-conversional method. J. China Coal Soc. 46:1727–37.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.