A Global Kinetic Model for the Formation and Destruction of the Products of Incomplete Combustion Produced from the Combustion of o-Dichlorobenzene

References

• Altwicker, E. R., 1989. The Destruction and Removal Efficiency of Toluene in Combustion and Related Processes, Chemosphere 19 (1989), pp. 1233–1241.
   Web of Science ®Google Scholar
• Altwicker, E. R., Schonberg, J. S., Konduri, R. F., and Milligan, M. S., 1990. Polychlorinated Dioxin/Furan Formation in Incinerators, Hazardous Waste and Hazardous Materials 7 (1990), pp. 73–87.
   Web of Science ®Google Scholar
• Amsden, A. A., and Harlow, F. H., 1968. Transport of Turbulence in Numerical Fluid Dynamics, J. Computational Phys. 3 (1968), p. 94.
   Google Scholar
• Ballschmiter, K., Zoller, W., Scholz, C., and Nottrodt, A., 1983. Occurrence and Absence of Polychlorodibenzofurans and Polychlorodibenzodioxins in Fly Ash from Municipal Incinerators, Chemosphere 12 (1983), pp. 585–594.
   Web of Science ®Google Scholar
• Baxter, L. L., 1989. "Turbulent Transport of Particles". In: Ph.D. Dissertation. Provo, Utah: Dept. of Chem. Eng. Brigham Young University; 1989.
   Google Scholar
• Baxter, L. L., Fletcher, T. H., Smith, P. J., and Smoot, L. D., 1984. Coal-Water Mixtures Combustion Model. CA: The Combustion Institute, Stanford University; 1984, presented at the Western State states Section.
   Google Scholar
• Choudhry, G. G., Olie, K., Hutzinger, O., Hutzinger, O., Frei, R. W., Merian, E., Pocchiari, F., , 1982. "Mechanisms in the Thermal Formation of Chlorinated Compounds Including Polychlorinated Dibenzo-p-Dioxins". In: Chlorinated Dioxins and Related Compounds: Impact on the Environment. Oxford: Pergamon Press; 1982. pp. 275–301, in, Ed. by.
   Google Scholar
• Dryer, F. L., Bartok, W., Sarofin, A. F., , 1991. "The Phenomenology of Modeling Combustion Chemistry". In: Fossil Fuel Combustion. NY: John Wiley and Sons, Inc.; 1991. p. 49, in, Ed. by.
   Google Scholar
• Fiveland, W. A., and Wessel, R. A., 1986. Numerical Model for Predicting Performance of Three-Dimensional Pulverized-Fuel Fired Furnaces. Boston, MA: Jt. AIAA/ASME Thermophysics and Heat Transfer Conference; 1986, 86-HT-35. presented at the, June 2–4.
   Google Scholar
• Fletcher, T. H., 1983. A Two-Dimensional Model for Coal Gasification and Combustion. Provo, Utah: Dept. of Chem. Eng., Brigham Young University; 1983, Ph.D. Dissertation.
   Google Scholar
• Gayden, A. G., and Wolfhard, H. G., 1979. Flames: Their Structure, Radiation and Temperature” . London: Chapman and Hall Ltd.; 1979. p. 240.
   Google Scholar
• Gillis, P. A., and Smith, P. J., 1990. "An Evaluation of 3-D Computational Combustion and Fluid-Dynamics for Industrial Furnace Geometries". In: Twenty-Third Symposium (International) on Combustion. Pittsburg, PA.: The Combustion Institute; 1990, July.
   Google Scholar
• Golden, D. M., Bartok, W., Sarofin, A. F., , 1991. "Evaluation of Chemical Thermodynamics and Rate Parameters for Use in Combustion Modeling". In: Fossil Fuel Combustion. NY: John Wiley & Sons, Inc.; 1991. p. 49, in, Ed. by.
   Google Scholar
• Gosman, A. D., Pun, W. M., Ruchal, A. K., Spalding, D. B., and Wolfshstein, R., 1969. Heat and Mass Transfer in Recirculating Flows. London: Academic Press; 1969.
   Google Scholar
• Gullett, B. K., Bruce, K. R., and Beach, L. O., 1989. "USEPA/Enivironment Canada". In: Int. Conf. on Municipal Waste Combustion. Hollywood, FL. 1989. pp. 1–25, Paper 8c, April 11–14.
   Google Scholar
• Harlow, F. H., Alder, B., Fernback, S., Rotenberg, M., , 1964. "The Particle-in-Cell Computing Method for Fluid Dynamics". In: Methods in Computational Physics. Vol. Vol. III. New York: Academic Press; 1964, in, Eds..
   Google Scholar
• Harlow, F. H., and Welch, J. E., 1965. Numerical Calculation of Time-Dependent Viscous Incompressible Flow, Phys. Fluids 8 (1965), p. 2182.
   Web of Science ®Google Scholar
• Hill, S. C., 1985. Modelling of Nitrogen Pollutants in Turbulent Pulverized-Coal Flames. Provo, Utah: Dept. of Chem. Eng., Brigham Young University; 1985, Ph.D. Dissertation.
   Google Scholar
• Ho, M. D., and Ding, M. G., 1988. Field Testing and Computer Modeling of an Oxygen Combustion System at the EPA Mobile Incinerator, JAPCA (1988), September.
   Google Scholar
• Jamaluddin, A. S., and Smith, P. J., 1988. Predicting Radiative Transfer in Rectangular Enclosures using the Discrete Ordinates Method, Comb. Sci. and Tech. 62 (1988), pp. 173–186.
   Web of Science ®Google Scholar
• Kuo, K. K., 1986. Principles of Combustion. New York: John Wiley & Sons; 1986.
   Google Scholar
• Laidler, K. J., 1987. Chemical Kinetics” . New York: Harper & Row; 1987. pp. 229–268.
   Google Scholar
• Lee, K. C., Morgan, N., Hansen, J. L., and Whipple, G. M., 1982. Revised Model for the Prediction of the Time-Temperature Requirements for Thermal Destruction of Dilute Organic Vapors and its Usage for Predicting Compound Destructability. New Orleans, Louisiana: 75th Annual Meeting of the Air Pollution Control Association; 1982, Presented at the, June 20–25.
   Google Scholar
• Nallasamy, M., 1985. A Critical Evaluation of Various Turbulence Models as Applied to Internal Fluid Flows (1985), NASA Technical Paper 2474.
   Google Scholar
• Owens, W. D., Silcox, G. D., Lighty, J. S., Deng, X., Pershing, D. W., Cundy, V. A., Leger, C., and Jakway, A. L., 1991. Thermal Analysis of Rotary Kiln Incineration: Comparison of Theory and Experiment, Combustion and Flame, 86 (1991), p. 101.
   Google Scholar
• Patankar, S. V., and Spalding, D. B., 1972. "A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-Dimensional Parabolic Flow". In: 14th Symposium (International) on Combustion. The Combustion Institute; 1972. p. 1787.
   Google Scholar
• Pratap, V. S., and Spalding, D. B., 1976. Fluid Flow and Heat Transfer in Three-Dimensional Duct Flows, Int. J. Heat Mass Transfer 19 (1976), pp. 1183–1188.
   Web of Science ®Google Scholar
• Rasband, M. W., 1988. PCGC-2 and the Data Book: A Concurrent Analysis of Data Reliability and Code Performance. Provo, UT: Dept. of Chem. Eng., Brigham Young University; 1988, M.S. Thesis.
   Google Scholar
• Robinson, G. F., 1985. A Three-dimensional Analytical Model of a Large Tangentially-fired Furnace, J. Inst. Energy 116 (1985), pp. 116–150.
   Google Scholar
• Rogers, S. E., Kwak, D., and Kiris, C., 1989. "Numerical Solution of the Incompressible Navier-Stokes Equations for Steady-State and Time-Dependent Problems". In: AIAA-89-0463. Reno, Nevada: 27th Aerospace Science Meeting; 1989, presented at the, January 9–12.
   Google Scholar
• Senkan, S. M., 1988. Thermal Destruction of Hazardous Wastes: The Need for Fundamental Chemical Kinetic Research, Environ. Sci. Technol. 22 (1988), pp. 368–370.
   Web of Science ®Google Scholar
• Shaub, W. M., and Tsang, W., 1983. Dioxin Formation in Incinerators, Environ. Sci. Technol. 17 (1983), pp. 721–730.
   PubMed Web of Science ®Google Scholar
• Shaub, W. M., Tsang, W., Choudhary, G., Keith, L. H., Rappe, C., , 1985. Chlorinated Dibenzodioxins and Dibenzofurans in the Total Environment II. Stoneham, MA: Butterworth; 1985. pp. 469–487, ed. by.
   Google Scholar
• Silcox, G. D., and Pershing, D. W., 1990. The Effectsof Rotary Kiln Operating Conditions and Design on Burden Heating Rate as Determined by a Mathematical Model of Rotary Kiln Heat Transfer, J. Air Waste Manage. Assoc. 40 (1990), p. 337.
   Web of Science ®Google Scholar
• Sloan, D. G., Smith, P. J., and Smoot, L. D., 1986. Modelling of Swirl in Turbulent Flow Systems, Prog. Energy Comb. Sci. 12 (1986), p. 63.
   Web of Science ®Google Scholar
• Smith, J. D., 1990. A Detailed Evaluation of Comprehensive Simulation Software Describing Pulverized Coal Combustion and Gasification using Advanced Sensitivity Analysis Techniques. Provo, Utah: Dept. of Chem. Engg., Brigham Young University; 1990.
   Google Scholar
• Smith, J. M., 1981. "Heterogeneous Processes, Catalysis and Adsorption". In: Chemical Engineering Series. New York, London: McGraw-Hill; 1981. p. 311, in.
   Google Scholar
• Smith, P. J., Fletcher, T. H., and Smoot, L. D., 1981. "Model for Pulverized Coal-Fired Reactors". In: 18th Symposium (International) all Comhustion. Pittsburg, PA: The Combustion Institute; 1981. pp. 1285–1293.
   Google Scholar
• Stieglitz, L., Zwick, G., Beck, J., Roth, W., and Vogg, H., 1989. On the De-Novo Synthesis of PCDD/PCDF on Fly Ash of Municipal Waste Incinerators, Chemosphere 18 (1989), pp. 1219–1226.
   Web of Science ®Google Scholar
• Sultanian, B. K., and Mongia, H. C., 1986. "Fuel Nozzle Air Flow Modelling". In: AIAA-86-1667. Huntsville, AL: AIAA/ASME/SAE/ASEE 22nd Joint Propulsion Conference; 1986, presented at the, June 16–18.
   Google Scholar
• VanDell, R. D., and Boggs, G. U., 1987. Particulate Associated Partial Combustion Products of Dichlorobenzene, Chemosphere 16 (No.5) (1987), pp. 973–982.
   Web of Science ®Google Scholar
• VanDell, R. D., Mahle, N. H., Clement, R. E., Kagel, R. O., , 1990. "The Role of Carbon Particulate Surface Area on the Products of Incomplete Combustion (PICs) Emission". In: Emissions From Combustion Processes: Origin, Measurement, Control. Chelsea, Michigan: Lewis Publishers; 1990. pp. 93–107, Chapter 7, in, Eds..
   Google Scholar
• VanDell, R. D., and Mahle, N. H., 1992. A Study of the Products of Incomplete Combustion and Precursors Produced in the Flame and their Post Flame Modification from the Combustion of o-Dichlorobenzene in a High Resolution Laboratory Thermal Oxidizer, COMBUSTION SCIENCE AND TECHNOLOGY 85 (1992), pp. 327–343.
   Web of Science ®Google Scholar
• VanDell, R. D., Martini, R. D., Mahle, N. H., Clement, R. E., Kagel, R. O., , 1990. "Computer Automated Laboratory Thermal Oxidizer". In: Emissions From Combustion Processes: Origin, Measurement, Control. Chelsea, Michigan: Lewis Publishers; 1990. pp. 77–91, Chapter 6, in, Eds..
   Google Scholar
• VanDell, R. D., and Shadotf, L. A., 1984. Relative Rates and Partial Combustion Products from the Burning of ChIorobenzenes and Chlorobenzene Mixtures, Chemosphere 13 (1984), pp. 1177–1192.
   Web of Science ®Google Scholar
• Wiesenhahn, D. F., Li, C. P., and Penner, S. S., 1988. Energy 13 (1988), p. 225.
   Web of Science ®Google Scholar
• Williams, J. D., Becker, A. R., and Girovich, M. J., 1988. 3-D Flow Modeling of a Hazardous Waste Incinerator 33 (1988), pp. 1050–1053.
   Google Scholar