3,641
Views
24
CrossRef citations to date
0
Altmetric
Articles

Sociotechnical approaches to workplace safety: Research needs and opportunities

, , , , , , & show all
Pages 650-658 | Received 22 Jan 2014, Accepted 17 Jan 2015, Published online: 02 Mar 2015

References

  • Bieder, C., and M.Bourrier, eds. 2013. Trapping Safety into Rules. Farnham: Ashgate.
  • BooherH. R.2003. Handbook of Human-Systems Integration. Hoboken, NJ: Wiley.
  • BoxG. E. P., and N. R.Draper. 1987. Empirical Model Building and Response Surfaces. New York: Wiley.
  • BurtonJ.2010. “WHO Healthy Workplace Framework and Model: Background and Supporting Literature and Practices.” Accessed January 15, 2014. http://www.who.int/occupational_health/healthy_workplace_framework.pdf.
  • CarayonP., P.Hancock, N.Leveson, Y. I.Noy, L.Sznelwar, and G.van Hootegem. 2015. “Advancing a Sociotechnical Systems Approach to Workplace Safety: Developing the Conceptual Framework.” doi:10.1080/00140139.2015.1015623.
  • CarayonP., A.Schoofs Hundt, B. T.Karsh, A. P.Gurses, C. J.Alvarado, M.Smith, and P.Flatley Brennan. 2006. “Work System Design for Patient Safety: The SEIPS Model.” Quality and Safety in Health Care15 (suppl_1): i50–i58. doi:10.1136/qshc.2005.015842.
  • CleggC. W.2000. “Sociotechnical Principles for System Design.” Applied Ergonomics31: 463–477.
  • CoakesE., and J.Coakes. 2009. “A Meta-Analysis of the Direction and State of Sociotechnical Research in a Range of Disciplines.” International Journal of Sociotechnology and Knowledge Development1 (1): 1–52. doi:10.4018/jskd.2009010101.
  • CohenA., M. J.Smith, and H. H.Cohen. 1975. Safety Program Practices in High vs. Low Accident Rate Companies: An Interim Report (Questionnaire Phase). Cincinnati, OH: National Institute for Occupational Safety and Health.
  • DainoffM. J.2009. “Can't We All Just Get Along? Some Alternative Views of the Knowledge Worker in Complex HCI Systems.” International Journal of Human-Computer Interaction25 (5): 328–347. doi:10.1080/10447310902864944.
  • DekkerS.2011. Drift into Failure. Farnham: Ashgate.
  • DekkerS.2015. Safety Differently. Boca Raton, FL: CRC Press.
  • FlachJ. M., J. S.Carroll, M. J.Dainoff, and W. I.Hamilton. 2015. “Striving for Safety: Communicating and Deciding in Sociotechnical Systems.” doi:10.1080/00140139.2015.1015621.
  • FlachJ. M., and C. O.Dominguez. 1995. “Use-Centered Design: Integrating the User, Instrument, and Goal.” Ergonomics in Design3 (3): 19–24. doi:10.1177/106480469500300306.
  • HaleA., and D.Borys. 2013a. “Working to Rule, or Working Safely? Part 1: A State of the Art Review.” Safety Science55: 207–221. doi:10.1016/j.ssci.2012.05.011.
  • HaleA., and D.Borys. 2013b. “Working to Rule or Working Safely? Part 2: The Management of Safety Rules and Procedures.” Safety Science55: 222–231. doi:10.1016/j.ssci.2012.05.013.
  • HaleA. R., and J.Hovden. 1998. “Management and Culture: The Third Age of Safety: A Review of Approaches to Organisational Aspects of Safety, Health and Environment.” In Occupational Injury: Risk, Prevention and Intervention, edited by A. M.Feyer and A.Williamson, 129–165. London: Taylor and Francis.
  • HaslamR. A., S. A.Hide, A. G. F.Gibb, D. E.Gyi, T.Pavitt, S.Atkinson, and A. R.Duff. 2005. “Contributing Factors in Construction Accidents.” Applied Ergonomics36 (4): 401–415. doi:10.1016/j.apergo.2004.12.002.
  • HendrickH. W., and B. M.Kleiner. 2002. Macroergonomics: Theory, Methods, and Applications. Mahwah, NJ: Lawrence Erlbaum Associates.
  • HettingerL. J., A.Kirlik, Y. M.Goh, and P.Buckle. 2015. “Modeling and Simulation of Complex Sociotechnical Systems: Envisioning and Analyzing Work Environments.” doi:10.1080/00140139.2015.1008586.
  • HollandJ. H.2012. Signals and Boundaries: Building Blocks for Complex Adaptive Systems. Cambridge, MA: MIT Press.
  • HollnagelE.2006. “Resilience—the Challenge of the Unstable.” In Resilience Engineering: Concepts and Precepts, edited by E.Hollnagel, D.Woods, and N.Leveson, 9–14. Aldershot, UK: Ashgate.
  • HollnagelE.2009. The ETTO Principle: Efficiency-Thoroughness Trade-Off: Why Things that Go Right Sometimes Go Wrong. Farnham: Ashgate.
  • HovdenJ., E.Albrechtsen, and I. A.Herrera. 2010. “Is there a Need for New Theories, Models and Approaches to Occupational Accident Prevention?” Safety Science48 (8): 950–956. doi:10.1016/j.ssci.2009.06.002.
  • HuangY., D.Zohar, M.Robertson, A.Garabet, J.Lee, and L.Murphy. 2013. “Development and Validation of Safety Climate Scales for Lone Workers Using Truck Drivers as Exemplar.” Transportation Research Part F: Traffic Psychology and Behaviour17: 5–19. doi:10.1016/j.trf.2012.08.011.
  • KarshB.2006. “Meso-Ergonomics: A New Paradigm for Macroergonomics Research.” In Proceedings of the International Ergonomics Association 2006 Congress, Maastricht, July 10–14.
  • KarshB.-T., P. E.Waterson, and R. J.Holden. 2014. “Crossing Levels in Systems Ergonomics: A Framework to Support ‘Mesoergonomic’ Inquiry.” Applied Ergonomics45 (1): 45–54. doi:10.1016/j.apergo.2013.04.021.
  • KasviJ. J., M.Vartiainen, A.Pulkkis, and M.Nieminen. 2000. “The Role of Information Support Systems in the Joint Optimization of Work Systems.” Human Factors and Ergonomics in Manufacturing & Service Industries10 (2): 193–221. doi:10.1002/(SICI)1520-6564(200021)10:2 < 193:AID-HFM5>3.0.CO;2-H.
  • KellyJ. E.1978. “A Reappraisal of Sociotechnical Systems Theory.” Human Relations31 (12): 1069–1099. doi:10.1177/001872677803101204.
  • KleinL.2014. “What Do We Actually Mean by ‘Sociotechnical’? On Values, Boundaries and the Problems of Language.” Applied Ergonomics45 (2): 137–142. doi:10.1016/j.apergo.2013.03.027.
  • KleinerB. M., L. J.Hettinger, D. M.DeJoy, Y. H.Huang, and P. E. D.Love. 2015. “Sociotechnical Attributes of Safe and Unsafe Systems.” doi:10.1080/00140139.2015.1009175.
  • Le CozeJ. -C.2013. “New Models for New Times: An Anti-Dualist Move.” Safety Science59: 200–218. doi:10.1016/j.ssci.2013.05.010.
  • LevesonN.2012. Engineering a Safer World. Cambridge, MA: MIT Press.
  • LevesonN.2013. “Perspective: The Drawbacks in Using the Term ‘System of Systems’.” Biomedical Instrumentation and Technology47 (2): 115–118. doi:10.2345/0899-8205-47.2.115.
  • MeshkatiN., and RobertsonM. M.1986. “The Effects of Human Factors on the Success of Technology Transfer Projects to Industrial Developing Countries: A Review of Representative Case Studies.” In Human Factors in Organizational Design and Management-II, edited by H. W.Hendrick and O.Brown, Jr., 343–350. Amsterdam: North-Holland.
  • MIL-STD-882E. 2012. “US Department of Defense Standard Practice: System Safety.” Accessed 21 September, 2013. http://www.system-safety.org/Documents/MIL-STD-882E.pdf.
  • MillerJ. H., and S. E.Page. 2007. Complex Adaptive Systems: An Introduction to Computational Models of Social Life. Princeton, NJ: Princeton University Press.
  • MumfordE.2006. “The Story of Socio-Technical Design: Reflections on its Successes, Failures and Potential.” Information Systems Journal16 (4): 317–342. doi:10.1111/j.1365-2575.2006.00221.x.
  • MurphyL. A., M. M.Robertson, and P.Carayon. 2014. “The Next Generation of Macroergonomics: Integrating Safety Climate.” Accident Analysis and Prevention68: 16–24. doi:10.1016/j.aap.2013.11.011.
  • NoyY. I., L.Hettinger, M.Dainoff, P.Carayon, G.Leveson, T.Courtney, and M.Robertson. 2015. “Emerging Issues in Sociotechnical Systems Thinking and Workplace Safety.” doi:10.1080/00140139.2014.1001445.
  • O'KeefeD.2002. “MIL-STD-882 – Its History; and Importance. In System Safety: A Science and Technology Primer.” New England Chapter of the System Safety Society [online]. Accessed September 14, 2013. http://www.system-safety.org/resources/SS_primer_4_02.pdf.
  • RasmussenJ., A. M.Pejtersen, and L. P.Goodstein. 1994. Cognitive Systems Engineering. New Jersey, NJ: Wiley.
  • ReaderT. W., M. C.Noort, S.Shorrock, and B.Kirwan. in press. “Safety San Frontières: An international Safety Culture Model.” Risk Analysis.
  • ReimanT., C.Rollenhagen, E.Pietikäinen, and J.Heikkilä. 2015. “Principles of Adaptive Management in Complex Safety–Critical Organizations.” Safety Science71: 80–92. doi:10.1016/j.ssci.2014.07.021.
  • RobertsonM. M., and T. K.Courtney. 2004. “A Systems Analysis Approach to Solving Office Work System Health and Performance Problems.” Theoretical Issues in Ergonomics Science5 (3): 181–197. doi:10.1080/1463922021000032320.
  • RobertsonM. M., R.Henning, N.Warren, S.Nobrega, M.Dove-Steinkamp, L.Tibirica, A.Bizarro, and the CPH-NEW Research Team. 2013. “The Intervention Design and Analysis Scorecard.” Journal of Occupational Environmental Medicine55 (12): S86–S88. doi:10.1097/JOM.0000000000000036.
  • RobertsonM. M., B.Kleiner, and M. J.O'Neill. 2002. “Macroergonomics Sytems Tools.” In Macroergonomics, edited by H.Hendrick and B.Kleiner, 67–96. London: Lawrence.
  • ScottP. A.2008. “The Role of Ergonomics in Securing Sustainability in Dveloping Cuntries.” In Corporate Sstainability as a Challenge for Cmprehensive Management, edited by K. J.Zink, 171–181. Heidelberg: Physica-Verlag.
  • ShahnavazH.2002. “Macroergonomic Considerations in Technology Transfer.” In Macroergonomics: Theory, Methods, and Applications, edited by H. W.Hendrick and B. M.Kleiner, 311–323. Mahwah, NJ: Lawrence Erlbaum Associates.
  • StantonN. A.in press. “Commentary on the Paper by Heimrich Kanis Entitled ‘Reliability and Validity of Findings in Ergonomics Research’: Where is the Methodology in Ergonomics Methods?” Theoretical Issues in Ergonomics Science.
  • StantonN. A., C.Baber, and D.Harris. 2008. Modelling Command and Control: Event Analysis of Systemic Teamwork. Aldershot: Ashgate.
  • TristE., and K.Bamforth. 1951. “Some Social and Psychological Consequences of the Longxwall Method of Coal-Getting: An Examination of the Psychological Situation and Defences of a Work Group in Relation to the Social Structure and Technological Content of the Work System.” Human Relations4 (1): 3–38. doi:10.1177/001872675100400101.
  • UnderwoodP., and P.Waterson. 2014. “Systems Thinking, the Swiss Cheese Model and Accident Analysis: A Comparative Systemic Analysis of the Grayrigg Train Derailment Using the ATSB, AcciMap and STAMP Models.” Accident Analysis & Prevention68: 75–94. doi:10.1016/j.aap.2013.07.027.
  • von BertalanffyL.1968. General Systems Theory: Foundations, Development and Applications. New York: G. Braziler.
  • WatersonP. E., C. W.Clegg, and M.Robinson. 2014. “Trade-Offs Between Reliability, Validity and Utility in the Development of Human Factors Methods.” In Human Factors in Organizational Design and Management XI, edited by O.Broberg, N.Fallentin, P.Hasle, P. L.Jensen, A.Kabel, M. E.Larsen, and T.Weller. Santa Monica, CA: IEA Press. (CD ROM).
  • WatersonP., M. M.Robertson, N. J.Cooke, L.Militello, E.Roth, and N. A.Stanton. 2015. “Defining the Methodological Challenges and Opportunities for an Effective Science of Sociotechnical Systems and Safety.” doi:10.1080/00140139.2015.1015622.
  • WilsonJ. R.2014. “Fundamentals of Systems Ergonomics/Human Factors.” Applied Ergonomics45 (1): 5–13. doi:10.1016/j.apergo.2013.03.021.
  • WilsonJ. R., and S. M.Grey. 1990. “But What are the Issues in Work Design?” In Work Design in Practice, edited by C. M.Haslegrave, J. R.Wilson, E. N.Corlett, and I.Manenica, 45–54. London: Taylor and Francis.
  • WilsonJohn, BrendanRyan, AlexSchock, PedroFerreira, StuartSmith, and JuliaPitsopoulos. 2009. “Understanding Safety and Production Risks in Rail Engineering Planning and Protection.” Ergonomics52 (7): 774–790. doi:10.1080/00140130802642211.
  • ZoharD.2010. “Thirty Years of Safety Climate Research: Reflections and Future Directions.” Accident Analysis and Prevention42 (5): 1517–1522. doi:10.1016/j.aap.2009.12.019.
  • ZoharD.2014. “Safety Climate: Conceptualization, Measurement and Improvement.” In The Oxford Handbook of Organizational Climate and Culture, edited by B.Schneider and B.Barbera, 317. Oxford: Oxford University Press.