References
- Adams, M. A., and P. Dolan. 1991. “A Technique for Quantifying the Bending Moment Acting on the Lumbar Spine, in Vivo.” Journal of Biomechanics 24: 117–126.10.1016/0021-9290(91)90356-R
- Chervak, S. G., and C. G. Drury. 1996. “Human Factors Audit Program for Maintenance.” In Human Factors in Aviation Maintenance: Phase Five Progress Report ( Report No. DOT/FAA/AM-96/2), edited by W. T. Shepherd. Springfield, VA: National Technical Information System.
- David, G., V. Woods, G. Li, and P. Buckle. 2008. “The Development of the Quick Exposure Check (QEC) for Assessing Exposure to Risk Factors for Work-related Musculoskeletal Disorders.” Applied Ergonomics 39 (1): 57–69.10.1016/j.apergo.2007.03.002
- Dempsey, P. G., R. W. McGorry, and W. S. Maynard. 2005. “A Survey of Tools and Methods Used by Certified Professional Ergonomists.” Applied Ergonomics 36 (4): 489–503.10.1016/j.apergo.2005.01.007
- Dempsey, P. G., W. L. Porter, J. P. Pollard, and C. G. Drury. 2012. “Using Multiple Complementary Methods to Develop Ergonomics Audits for Mining Operations.” Proceedings of the Human Factors and Ergonomics Society 56th Annual Meeting, 1213–1217. Santa Monica, CA: Human Factors and Ergonomics Society.
- Dolan, P., and M. A. Adams. 1993. “The Relationship between EMG Activity and Extensor Moment Generation in the Erector Spinae Muscles during Bending and Lifting Activities.” Journal of Biomechanics 26: 513–522.10.1016/0021-9290(93)90013-5
- Drury, C. G. 1998. “Auditing Ergonomics.” In Ergonomics in Manufacturing, edited by W. Karwowski and G. Salvendy, 397–411. Dearborn, MI: Society of Manufacturing Engineers (SME).
- Drury, C. G., and Dempsey, P. G. 2012. “Human Factors and Ergonomics Audits.” In Handbook of Human Factors and Ergonomics. 4th ed., edited by G. Salvendy, 1092–1121. New York: Wiley.10.1002/9781118131350
- Drury, C. G., W. L. Porter, and P. G. Dempsey. 2012. “Patterns in Mining Haul-truck Accidents.” Proceedings of the Human Factors and Ergonomics Society 56th Annual Meeting, 2011–2015. Santa Monica, CA: Human Factors and Ergonomics Society.
- Gallagher, S., and J. Heberger. 2015. “The Effects of Operator Position, Pallet Orientation, and Palletizing Condition on Low Back Loads in Manual Bag Palletizing Operations.” International Journal of Industrial Ergonomics 47: 84–92.10.1016/j.ergon.2015.03.005
- Gallagher, S., J. Pollard, N. Manke, and J. Heberger. 2011. “Field Assessment of Biomechanical and Physiological Demands in Sand and Limestone Bagging Operations.” In Proceedings of the Human Factors and Ergonomics Society 55th Annual Meeting, 1002–1006. Santa Monica,CA. Human Factors and Ergonomics Society.
- Heberger, J., M. Nasarwanji, V. Paquet, P. G. Dempsey, and J. P. Pollard. 2012. “Video-based Ergonomic Job Analysis for Maintenance Work in Minerals Processing and Coal Preparation Plants.” Proceedings of the Human Factors and Ergonomics Society 56th Annual Meeting, 2368–2372. Santa Monica, CA: Human Factors and Ergonomics Society.
- Hight, R., K. Schultz, F. Hurley-Wagner, M. Feletto, B. D. Lowe, Y. K. Kong, and T. Waters. 2004. Easy Ergonomics: A Guide to Selecting Non-Powered Hand Tools. DHHS(NIOSH) 2004-164. Cincinnati, OH: California Department of Industrial Relations and the National Institute for Occupational Safety and Health.
- Horberry, T., R. Burgess-Limerick, and R. Fuller. 2013. “The Contribution of Human Factors and Ergonomics to a Sustainable Minerals Industry.” Ergonomics 56 (3): 556–564.10.1080/00140139.2012.718800
- ISO. 2004. ISO 15265 Risk Assessment Strategy for the Prevention of Stress or Discomfort in Thermal Working Conditions, 4–5. Geneva: International Organization for Standardization.
- Koli, S. 1994. “Ergonomic Audit for a Non-repetitive Task.” Unpublished Master’s thesis, State University of New York at Buffalo.
- Koli, S., S. Chervak, and C. G. Drury. 1998. “Human Factors Audit Programs for Nonrepetitive Tasks.” Human Factors and Ergonomics in Manufacturing 8 (3): 215–231.10.1002/(ISSN)1520-6564
- Koli, S., C. G. Drury, J. Cuneo, and J. Lofgren. 1993. Ergonomic Audit for Visual Inspection of Aircraft, Human Factors in Aviation Maintenance-phase Four, Progress Report, DOT/FAA/AM-93/Xx. Springfield, VA: National Technical Information Service.
- Mayton, A. G., W. L. Porter, X. S. Xu, E. Weston, and E. Rubenstein. 2016. “Investigation of Human Body Vibration Exposures on Haul Trucks Operating at U.S. Surface Mines/Quarries Relative to Reported Ingress/Egress Injuries and Haul Truck Activity.” Submitted to International Journal of Industrial Ergonomics.
- Moore, S. M., W. L. Porter, and P. G. Dempsey. 2009. “Fall from Equipment Injuries in U.S. Mining: Identification of Specific Research Areas for Future Investigation.” Journal of Safety Research 40 (6): 455–460.10.1016/j.jsr.2009.10.002
- Meghashyam, G. 1995. “Electronic Ergonomic Audit System for Maintenance and Inspection.” In Proceedings of the Human Factors and Ergonomics Society 39th Annual Meeting, edited by C. A. Santa Monica, 75–78. Human Factors and Ergonomics Society.
- Nasarwanji, M. F., L. M. Reardon, J. R. Heberger, and P. G. Dempsey. 2016. “Analysis of Physical Demands during Bulk Bag Closing and Sealing.” International Journal of Industrial Ergonomics 53: 363–371.10.1016/j.ergon.2016.03.006
- Pollard, J. P., J. R. Heberger, and P. G. Dempsey. 2014. “Maintenance and Repair Injuries in US Mining.” Journal of Quality in Maintenance Engineering 20 (1): 20–31.10.1108/JQME-02-2013-0008
- Pollard, J. P., J. R. Heberger, and P. G. Dempsey. 2015. “Slip Potential for Commonly Used Inclined Grated Metal Walkways.” IIE Transactions on Occupational Ergonomics and Human Factors 3 (2): 115–126.10.1080/21577323.2014.1001501
- Pollard, J. P., W. L. Porter, A. G. Mayton, X. Xu, and E. Weston. 2017. “The Effect of Vibration Exposure during Haul Truck Operations on Grip Strength, Touch Sensation, and Balance.” International Journal of Industrial Ergonomics 57: 23–31.10.1016/j.ergon.2016.11.009
- Reardon, L. M., J. R. Heberger, and P. G. Dempsey. 2014. “Analysis of Fatalities during Maintenance and Repair Operations in the U.S. Mining Sector.” IIE Transactions on Occupational Ergonomics and Human Factors 2 (1): 27–38.10.1080/21577323.2014.911222
- Santos, B. R., W. L. Porter, and A. G. Mayton. 2010. “An Analysis of Injuries to Haul Truck Operators in the U.S. Mining Industry.” In Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, 1870–1874. Santa Monica, CA: Human Factors and Ergonomics Society.
- Simpson, G. C. 1994a. “Ergonomic Aspects in Improvement of Safe and Efficient Work in Shafts.” In Ergonomics Action in Mining, edited by O. Berchem-Simon, 245–256. Luxembourg: Commission of the European Communities.
- Simpson, G. C. 1994b. “Risk Perception and Hazard Awareness as Factors in Safe and Efficient Working.” In Ergonomics Action in Mining, edited by O. Berchem-Simon, 257–268. Luxembourg: Commission of the European Communities.
- Waters, T. R., V. Putz-Anderson, A. Garg, and L. J. Fine. 1993. “Revised NIOSH Equation for the Design and Evaluation of Manual Lifting Tasks.” Ergonomics 36 (7): 749–776.10.1080/00140139308967940