References
- Aarås, A., R. H. Westgaard, and E. Stranden. 1988. “Postural Angles as an Indicator of Postural Load and Muscular Injury in Occupational Work Situations.” Ergonomics 31 (6): 915–933. doi:https://doi.org/10.1080/00140138808966731.
- Andrews, D. M., R. W. Norman, R. P. Wells, and P. Neumann. 1998. “Comparison of Self-Report and Observer Methods for Repetitive Posture and Load Assessment.” Occupational Ergonomics 1 (3): 211–222. doi:https://doi.org/10.3233/OER-1998-1304.
- Borg, G. 1998. Borg’s Perceived Exertion and Pain Scales. Champaign, IL: Human Kinetics.
- Buchholz, B.,. V. Paquet, L. Punnett, D. Lee, and S. Moir. 1996. “PATH: A Work Sampling-Based Approach to Ergonomic Job Analysis for Construction and Other Non-Repetitive Work.” Applied Ergonomics 27 (3): 177–187. doi:https://doi.org/10.1016/0003-6870(95)00078-X.
- Chander, D. S., and M. P. Cavatorta. 2017. “An Observational Method for Postural Ergonomic Risk Assessment (PERA).” International Journal of Industrial Ergonomics 57: 32–41. doi:https://doi.org/10.1016/j.ergon.2016.11.007.
- Chiasson, M-È., D. Imbeau, K. Aubry, and A. Delisle. 2012. “Comparing the Results of Eight Methods Used to Evaluate Risk Factors Associated with Musculoskeletal Disorders.” International Journal of Industrial Ergonomics 42 (5): 478–488. doi:https://doi.org/10.1016/j.ergon.2012.07.003.
- Chung, M. K., I. Lee, and D. Kee. 2003. “Assessment of Postural Load for Varying Lower Limb Postures Based on Perceived Discomfort.” International Journal of Industrial Ergonomics 31 (1): 17–32. doi:https://doi.org/10.1016/S0169-8141(02)00115-4.
- Corlett, E. N., and R. P. Bishop. 1976. “A Technique for Assessing Postural Discomfort.” Ergonomics 19 (2): 175–182. doi:https://doi.org/10.1080/00140137608931530.
- Corlett, E. N., and J. Manenica. 1980. “The Effects and Measurement of Working Postures.” Applied Ergonomics 11 (1): 7–16. doi:https://doi.org/10.1016/0003-6870(80)90115-5.
- David, G. C. 2005. “Ergonomic Methods for Assessing Exposure to Risk Factors for Work-Related Musculoskeletal Disorders.” Occupational Medicine 55 (3): 190–199. doi:https://doi.org/10.1093/occmed/kqi082.
- Diego-Mas, J. A., and J. Alcaide-Marzal. 2014. “Using Kinect™ sensor in observational methods for assessing postures at work.” Applied Ergonomics 45 (4): 976–985. doi:https://doi.org/10.1016/j.apergo.2013.12.001.
- Dul, J., M. Douwes, and P. Smitt. 1994. “Ergonomic Guidelines for the Prevention of Discomfort of Static Postures Based on Endurance Data.” Ergonomics 37 (5): 807–815. doi:https://doi.org/10.1080/00140139408963690.
- Finneran, Aoife, and Leonard O’Sullivan. 2010. “Force, Posture and Repetition Induced Discomfort as a Mediator in Self-Paced Cycle Time.” International Journal of Industrial Ergonomics 40 (3): 257–266. doi:https://doi.org/10.1016/j.ergon.2010.01.004.
- Gisev, N., J. S. Bell, and T. F. Chen. 2013. “Interrater Agreement and Interrater Reliability: Key Concepts, Approaches, and Applications.” Research in Social & Administrative Pharmacy 9 (3): 330–338. doi:https://doi.org/10.1016/j.sapharm.2012.04.004.
- Grandjean, E. 1988. Fitting the Task to the Man. 4th ed. London: Taylor and Francis.
- Hellig, T., L. Johnen, A. Mertens, V. Nitsch, and C. Brandl. 2020. “Prediction Model of the Effect of Postural Interactions on Muscular Activity and Perceived Exertion.” Ergonomics 63 (5): 593–606. doi:https://doi.org/10.1080/00140139.2020.1740333.
- Hellig, T., A. Mertens, and C. Brandl. 2018. “The Interaction Effect of Working Postures on Muscle Activity and Subjective Discomfort during Static Working Postures and Its Correlation with OWAS.” International Journal of Industrial Ergonomics 68: 25–33. doi:https://doi.org/10.1016/j.ergon.2018.06.006.
- Hignett, S., and L. McAtamney. 2000. “Rapid Entire Body Assessment (REBA).” Applied Ergonomics 31 (2): 201–205. doi:https://doi.org/10.1016/S0003-6870(99)00039-3.
- Karhu, O., P. Kansi, and I. Kuorinka. 1977. “Correcting Working Postures in Industry: A Practical Method for Analysis.” Applied Ergonomics 8 (4): 199–201. doi:https://doi.org/10.1016/0003-6870(77)90164-8.
- Kee, D. 2004. “Psychological Stress of Arm Motions at Varying External Load and Repetition.” IE Interfaces 17: 218–225.
- Kee, D. 2019a. “Classification Scheme for Complex Trunk Motion and External Load Based on Perceived Discomfort.” Journal of the Ergonomics Society of Korea 38 (2): 141–150. doi:https://doi.org/10.5143/JESK.2019.38.2.141.
- Kee, D. 2019b. “Classification Scheme for Complex Wrist Motion and External Load Based on Perceived Discomfort.” Journal of the Ergonomics Society of Korea 38 (2): 95–104. doi:https://doi.org/10.5143/JESK.2019.38.2.95.
- Kee, D. 2019c. “Prediction of Whole Body Discomfort on the Basis of Hand Position and External Load.” Journal of the Ergonomics Society of Korea 38 (1): 13–25. doi:https://doi.org/10.5143/JESK.2019.38.1.13.
- Kee, D. 2020a. “An Empirical Comparison of OWAS, RULA and REBA Based on Self-Reported Discomfort.” International Journal of Occupational Safety and Ergonomics 26 (2): 285–295. doi:https://doi.org/10.1080/10803548.2019.1710933.
- Kee, D. 2020b. “Classification Scheme for Complex Neck Motions Based on Perceived Discomfort.” Journal of the Ergonomics Society of Korea 39 (5): 465–473. doi:https://doi.org/10.5143/JESK.2020.39.5.465.
- Kee, D. 2020c. “Comparison of the OWAS, RULA and REBA for Assessing Potential Work-Related Musculoskeletal Disorders.” International Journal of Industrial Ergonomics 83: 103140. doi:https://doi.org/10.1016/j.ergon.2021.103140.
- Kee, D., and W. Karwowski. 2001. “LUBA: An Assessment Technique for Postural Loading on the Upper Body Based on Joint Motion Discomfort and Maximum Holding Time.” Applied Ergonomics 32 (4): 357–366. doi:https://doi.org/10.1016/S0003-6870(01)00006-0.
- Kee, D., S. Na, and M. K. Chung. 2020. “Comparison of the Ovako Working Posture Analysis System, Rapid Upper Limb Assessment, and Rapid Entire Body Assessment Based on the Maximum Holding Times.” International Journal of Industrial Ergonomics 77: 102943. doi:https://doi.org/10.1016/j.ergon.2020.102943.
- Koo, T. K., and M. Y. Li. 2016. “A Guideline of Selecting and Reporting Intraclass Correlation Coefficients for Reliability Research.” Journal of Chiropractic Medicine 15 (2): 155–163. doi:https://doi.org/10.1016/j.jcm.2016.02.012.
- Li, L., T. Martin, and X. Xu. 2020. “A Novel Vision-Based Real-Time Method for Evaluating Postural Risk Factors Associated with Musculoskeletal Disorders.” Applied Ergonomics 87: 103138 doi:https://doi.org/10.1016/j.apergo.2020.103138.
- Lim, Sol, and Clive D’Souza. 2020. “A Narrative Review on Contemporary and Emerging Uses of Inertial Sensing in Occupational Ergonomics.” International Journal of Industrial Ergonomics 76: 102937. doi:https://doi.org/10.1016/j.ergon.2020.102937.
- Lind, C. M., M. Forsman, and L. M. Rose. 2019. “Development and Evaluation of RAMP I – A Practitioner's Tool for Screening of Musculoskeletal Disorder Risk Factors in Manual Handling.” International Journal of Occupational Safety and Ergonomics 25 (2): 165–180. doi:https://doi.org/10.1080/10803548.2017.1364458.
- Lind, C. M., M. Forsman, and L. M. Rose. 2020. “Development and Evaluation of RAMP II – A Practitioner's Tool for Assessing Musculoskeletal Disorder Risk Factors in Industrial Manual Handling.” Ergonomics 63 (4): 477–504. doi:https://doi.org/10.1080/00140139.2019.1710576.
- Mandrekar, J. N. 2011. “Measures of Interrater Agreement.” Journal of Thoracic Oncology 6 (1): 6–7. doi:https://doi.org/10.1097/JTO.0b013e318200f983.
- Manghisi, V. M., A. E. Uva, M. Fiorentino, V. Bevilacqua, G. F. Trotta, and G. Monno. 2017. “Real Time RULA Assessment Using Kinect v2 Sensor.” Applied Ergonomics 65: 481–491. doi:https://doi.org/10.1016/j.apergo.2017.02.015.
- McAtamney, L., and E. N. Corlett. 1993. “RULA: A Survey Method for the Investigation of Work-Related Upper Limb Disorders.” Applied Ergonomics 24 (2): 91–99. doi:https://doi.org/10.1016/0003-6870(93)90080-S.
- Miedema, M. C., M. Douwes, and J. Dul. 1997. “Recommended Maximum Holding Times for Prevention of Discomfort of Static Standing Postures.” International Journal of Industrial Ergonomics 19 (1): 9–18. doi:https://doi.org/10.1016/0169-8141(95)00037-2.
- Palm, P., M. Josephson, S. E. Mathiassen, and K. Kjellberg. 2016. “Reliability and Criterion Validity of an Observation Protocol for Working Technique Assessments in Cash Register Work.” Ergonomics 59 (6): 829–839. doi:https://doi.org/10.1080/00140139.2015.1098734.
- Pereira, M. J., L. M. Straker, T. A. Comans, and V. Johnston. 2016. “Inter-Rater Reliability of an Observation-Based Ergonomics Assessment Checklist for Office Workers.” Ergonomics 59 (12): 1606–1612. doi:https://doi.org/10.1080/00140139.2016.1157215.
- Rose, L. M., J. Eklund, L. N. Nilsson, L. Barman, and C. M. Lind. 2020. “The RAMP Package for MSD Risk Management in Manual Handling – A Freely Accessible Tool, with Website and Training Courses.” Applied Ergonomics 86: 103101–103111. doi:https://doi.org/10.1016/j.apergo.2020.103101.
- Ryu, T., Y-J. Park, S. Na, M. K. Chung, and D. Kee. 2005. “Evaluation of Varying Shoulder Postures with External Loads Using a Psychophysical Method.” Journal of the Ergonomics Society of Korea 24 (2): 9–15. doi:https://doi.org/10.5143/JESK.2005.24.2.009.
- Sanchez-Lite, A., M. Garcia, R. Domingo, and M. A. Sebastian. 2013. “Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design.” PLoS One 8 (8): e72703. doi:https://doi.org/10.1371/journal.pone.0072703.
- Storheim, K., and J. Zwart. 2014. “Musculoskeletal Disorders and the Global Burden of Disease study.” Annals of the Rheumatic Diseases 73 (6): 949–950. doi:https://doi.org/10.1136/annrheumdis-2014-205327.
- Sukadarin, E. H., B. M. Deros, J. Ghani, N. S. Mohd Nawi, and A. R. Ismail. 2016. “Postural Assessment in Pen-and-Paper-Based Observational Methods and Their Associated Health Effects: A Review.” International Journal of Occupational Safety and Ergonomics 22 (3): 389–398. doi:https://doi.org/10.1080/10803548.2016.1156924.
- Takala, E. P., I. Pehkonen, M. Forsman, G-Å. Hansson, S. E. Mathiassen, W. P. Neumann, G. Sjøgaard, K. B. Veiersted, R. H. Westgaard, and J. Winkel. 2010. “Systematic Evaluation of Observational Methods Assessing Biomechanical Exposures at Work.” Scandinavian Journal of Work, Environment & Health 36 (1): 3–24. doi:https://doi.org/10.5271/sjweh.2876.
- Vignais, N., M. Miezal, G. Bleser, K. Mura, D. Gorecky, and F. Marin. 2013. “Innovative System for Real-Time Ergonomic Feedback in Industrial Manufacturing.” Applied Ergonomics 44 (4): 566–574. doi:https://doi.org/10.1016/j.apergo.2012.11.008.
- Waters, T. R., V. Putz-Anderson, A. Garg, and L. J. Fine. 1993. “Revised NIOSH Equation for the Design and Evaluation of Manual Lifting Tasks.” Ergonomics 36 (7): 749–776. doi:https://doi.org/10.1080/00140139308967940.
- WHO Scientific Group. 2003. The Burden of Musculoskeletal Conditions at the Start of the New Millennium. Geneva: World Health Organization.
- Winkel, J., and S. E. Mathiassen. 1994. “Assessment of Physical Work Load in Epidemiologic Studies: Concepts, Issues and Operational Considerations.” Ergonomics 37 (6): 979–988. doi:https://doi.org/10.1080/00140139408963711.
- Yan, X., H. Li, A. R. Li, and H. Zhang. 2017. “Wearable IMU-Based Real-Time Motion Warning System for Construction Workers’ Musculoskeletal Disorders Prevention.” Automation in Construction 74: 2–11. doi:https://doi.org/10.1016/j.autcon.2016.11.007.
- Yang, Liyun, Ke Lu, Jose A. Diaz-Olivares, Fernando Seoane, Kaj Lindecrantz, Mikael Forsman, Farhad Abtahi, and Jorgen A. E. Eklund. 2018. “Towards Smart Clothing for Automatic Risk Assessment of Physical Workload.” IEEE Access. 6: 40059–40072. doi:https://doi.org/10.1109/ACCESS.2018.2855719.
- Yen, T. Y., and R. G. Radwin. 2000. “Comparison between Using Spectral Analysis of Electrogoniometer Data and Observational Analysis to Quantify Repetitive Motion and Ergonomic Changes in Cyclical Industrial Work.” Ergonomics 43 (1): 106–132. doi:https://doi.org/10.1080/001401300184684.
- Zetterberg, Camilla, Marina Heiden, Per Lindberg, Per Nylén, and Hillevi Hemphälä. 2019. “Reliability of a New Risk Assessment Method for Visual Ergonomics.” International Journal of Industrial Ergonomics 72: 71–79. doi:https://doi.org/10.1016/j.ergon.2019.04.002.