References
- S. R. Platt , S. Farritor , K. Garvin , and H. Haider . The use of piezoelectric ceramics for electric power generation within orthopedic implants, IEEE/ASME Trans. Mechatron. 10 (4), 455 (2005).
- X. Xie , and Q. Wang . A mathematical model for piezoelectric ring energy harvesting technology from vehicle tires, Int. J. Eng. Sci. 94, 113 (2015).
- G. Gatti , M. J. Brennan , M. G. Tehrani , and D. J. Thompson . Harvesting energy from the vibration of a passing train using a single-degree-of-freedom oscillator, Mech. Sys. Signal Process. 66–67, 785 (2016).
- N. S. Shenck , and J. A. Paradis . Energy scavenging with shoe-mounted piezoelectrics, IEEE Micro 21 (3), 30 (2001).
- J. L. Gonzalez , A. Rubio , and F. Moll . Human powered piezoelectric batteries to supply power to wearable electronic devices, Int. J. Soc. Mater. Eng. Resour. 10 (1), 34 (2002).
- X. D. Xie , Q. Wang , and N. Wu . Energy harvesting from transverse ocean waves by a piezoelectric plate, Int. J. of Eng. Sci. 81, 41 (2014).
- Taufik, M. Taufik . The DC House Project: Promoting the use of renewable energy for rural electrification. Presented at The International Conference on Power Engineering and Renewable Energy, July 2012.
- N. Rezaei-Hosseinabadi , A. Tabesh , R. Dehghani , and A. Aghili . An efficient piezoelectric windmill topology for energy harvesting from low-speed air flows. IEEE Trans. Ind. Electron. 62, 3576–3583 (2015).
- B. Yardimoglu , and D. J. Inman . Coupled bending-bending-torsion vibration of a rotating pre-twisted beam with aerofoil cross-section and flexible root by finite element method, Shock Vibrat. 11 (5–6), 637 (2004).
- W. Carnegie . Vibrations of Rotating Cantilever Blading, J. Mech. Eng. Sci. 1 (3), 235 (1959).
- A. Erturk , and D. J. Inman . An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations, Smart Mater. Struct. 18 (2), 025009 (2009).
- J. Shunong , et al. , Performance of a piezoelectric bimorph for scavenging vibration energy, Smart Mater. Struct. 14 (4), 769 (2005).
- A. Erturk , and D. J. Inman . On mechanical modeling of cantilevered piezoelectric vibration energy harvesters, J. Intell. Mater. Syst. Struct. 19 (11), 1311 (2008).
- A. Abdelkefi , F. Najar , a. H. Nayfeh , and S. Ben Ayed . An energy harvester using piezoelectric cantilever beams undergoing coupled bending–torsion vibrations, Smart Mater. Struct. 20 (11), 115007 (2011).
- P. Li , F. Jin , and J. Yang . A piezoelectric energy harvester with increased bandwidth based on beam flexural vibrations in perpendicular directions, IEEE Trans. Ultrason, Ferroelectr. Freq. Contr. 60 (10), 2214 (2013).
- F. Goldschmidtboeing , and P. Woias . Characterization of different beam shapes for piezoelectric energy harvesting. J. Micromech. Microeng. 18 (10), 104013 (2008).