References
- K. Zhang , Broadband 1-3 piezocomposite transducers for underwater ultrasound, Proc. 2014 Symp. Piezoelectricity. Acoust. Waves, Device Appl., 437 (2014).
- J. Kim , and Y. Roh , Homogenization of PMN-PT/epoxy 1–3 piezocomposites by resonator measurements and finite element analysis. Sens. Actuators. A. Phys. 206, 97 (2014).
- J. Fischer , et al. , Design and fabrication of a 5 MHz ultrasonic phased array probe with curved transducer, SPIE Microtechnologies, 2013: p. 87632M.
- S. Li et al. , A dual-layer micromachined PMN-PT 1-3 composite transducer for broadband ultrasound imaging. 2013 IEEE Int. Ultrason. Symp., 781 (2013).
- C. Bantignies et al. , Lead-free high-frequency linear-array transducer (30 MHz) for in vivo skin imaging. 2013 IEEE Int. Ultrason. Symp., 785 (2013).
- D. Ekeom , A. H. Henni , and G. Cloutier , Design of a phased array for the generation of adaptive radiation force along a path surrounding a breast lesion for dynamic ultrasound elastography imaging. IEEE Trans. Ultrason, Ferroelect, Freq. Contr. 60 (3), 552 (2013).
- X. Li et al. , Micromachined PIN-PMN-PT crystal composite transducer for high-frequency intravascular ultrasound (IVUS) imaging. IEEE Trans. Ultrason, Ferroelect, Freq. Contr. 61 (7), 1171 (2014).
- L. Qin et al. , The study of 1-1-3 piezoelectric composite based on relaxor ferroelectric single crystal. 2014 Jt. IEEE Int. Symp. Appl. Ferroelectr. Int. Work. Acoust. Transduct. Mater. Devices Work. Piezoresponse Force Microsc., 1 (2014).
- D. Liu et al. , Broadband and high sensitive time-of-flight diffraction ultrasonic transducers based on PMNT/Epoxy 1–3 piezoelectric composite. Sensors. 15 (3), 6807 (2015).
- R. Rouffaud et al. , Super-cell piezoelectric composite with 2013;3 connectivity. IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 63, 2215 (2016).
- C. He et al. , Design and fabrication of air-based 1-3 piezoelectric composite transducer for air-coupled ultrasonic applications. J. Sensors. 2016, 1 (2016).
- X. Mi , et al. , Electromechanical coupling coefficient and acoustic impedance of 1-1-3 piezoelectric composites. Ceram. Int. 43 (9), 7374 (2017).
- M. C. Ray , The concept of a novel hybrid smart composite reinforced with radially aligned zigzag carbon nanotubes on piezoelectric fibers. Smart Mater. Struct. 19, 35008 (2010).
- W. A. Smith , and B. A. Auld , Modeling 1-3 composite piezoelectrics: thickness-mode oscillations. IEEE Trans. Ultrason, Ferroelect, Freq. Contr. 38 (1), 40 (1991).
- P. Reynolds , J. Hyslop , and G. Hayward , Analysis of spurious resonances in single and multi-element piezocomposite ultrasonic transducers, IEEE Symp. Ultrason. 2, 1650 (2003).
- R. Rouffaud et al. , Influence of 1-3 piezocomposite fabrications on lateral modes. 2012 IEEE Int. Ultrason. Symp., 1 (2012).
- H. Jae Lee et al. , Characterization of piezoelectric ceramics and 1-3 composites for high power transducers. Appl. Phys. Lett. 101(3), 32902 (2012).
- K. C. Cheng et al. , Single crystal PMN-0.33PT/epoxy 1-3 composites for ultrasonic transducer applications. IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 50, 1177 (2003).
- J. A. Hossack , and G. Hayward , Finite-element analysis of 1-3 composite transducers. IEEE Trans. Ultrason, Ferroelect, Freq. Contr. 38(6), 618 (1991).