Advanced search
Publication Cover
Ferroelectrics Volume 558, 2020 - Issue 1
Submit an article Journal homepage
216
Views
4
CrossRef citations to date
0
Altmetric
Articles

Preparation and electrical performance of BCHT lead-free piezoelectric ceramics via powder injection molding

Can WangSchool of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstration Center for Materials Science and Engineering, Changzhou University, Changzhou, China; View further author information
,
Dun WuSchool of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstration Center for Materials Science and Engineering, Changzhou University, Changzhou, China; View further author information
,
Bijun FangSchool of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstration Center for Materials Science and Engineering, Changzhou University, Changzhou, China; Correspondence[email protected] [email protected]
View further author information
,
Shuai ZhangSchool of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstration Center for Materials Science and Engineering, Changzhou University, Changzhou, China; View further author information
&
Jianning DingSchool of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technology, National Experimental Demonstration Center for Materials Science and Engineering, Changzhou University, Changzhou, China; ;School of Material Science and Engineering, Jiangsu University, Zhenjiang, ChinaView further author information
Pages 12-26 | Received 30 Jan 2019, Accepted 04 Jan 2020, Published online: 04 May 2020

References

  • J. Hao et al., Progress in high-strain perovskite piezoelectric ceramics, Mater. Sci. Eng. R Rep. 135, 1 (2019). DOI: 10.1016/j.mser.2018.08.001.
  • J. G. Wu, D. Q. Xiao, and J. G. Zhu, Potassium–sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries, Chem. Rev. 115 (7), 2559 (2015). DOI: 10.1021/cr5006809.
  • Y. Wang et al., Large piezoelectricity in ternary lead-free single crystals, Adv. Electron. Mater. 6 (1), 1900949/1–9 (2020).
  • T. Zheng et al., Recent development in lead-free perovskite piezoelectric bulk materials, Prog. Mater. Sci. 98, 552 (2018). DOI: 10.1016/j.pmatsci.2018.06.002.
  • I. Coondoo, N. Panwar, and A. Kholkin, Lead-free piezoelectrics: current status and perspectives, J. Adv. Dielect. 3 (2), 1330002/1–22 (2013). DOI: 10.1142/S2010135X13300028.
  • S. O. Leontsev, and R. E. Eitel. Progress in engineering high strain lead-free piezoelectric ceramics, Sci. Technol. Adv. Mater. 11 (4), 044302/1–13 (2010). DOI: 10.1088/1468-6996/11/4/044302.
  • W. Liu, and X. Ren, Large piezoelectric effect in Pb-free ceramics, Phys. Rev. Lett. 103, 257602/1–4 (2009). DOI: 10.1103/PhysRevLett.103.018101.
  • Y. Zhang, H. Sun, and W. Chen, A brief review of Ba(Ti0.8Zr0.2)O3-(Ba0.7Ca0.3)TiO3 based lead-free piezoelectric ceramics: past, present and future perspectives, J. Phys. Chem. Solids. 114, 207 (2018). DOI: 10.1016/j.jpcs.2017.10.041.
  • J. Shi et al., Large electrocaloric effect in lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics prepared via citrate route, Materials. 10 (9), 1093/1–8 (2017). DOI: 10.3390/ma10091093.
  • C. Zhou et al., Triple-point-type morphotropic phase boundary based large piezoelectric Pb-free material-Ba(Ti0.8Hf0.2)O3-(Ba0.7Ca0.3)TiO3, Appl. Phys. Lett. (2012). DOI: 10.1063/1.4724216.
  • D. Wang et al., Phase diagram and enhanced piezoelectric response of lead-free BaTiO 3 -CaTiO 3 -BaHfO 3 system, J. Am. Ceram. Soc. 97 (10), 3244 (2014). DOI: 10.1111/jace.13137.
  • S. Chootin, and T. Bongkarn, Optimum conditions for preparation of high-performance (Ba0.97Ca0.03)(Ti0.94Sn0.06)O3 ceramics by solid-state combustion, Journal of Elec. Materi. 46 (8), 5215 (2017). DOI: 10.1007/s11664-017-5533-6.
  • X. Liu et al., Enhancing piezoelectric properties of BCZT ceramics by Sr and Sn co-doping, J. Alloys. Compd. 640, 128 (2015). DOI: 10.1016/j.jallcom.2015.04.029.
  • J. S. Han et al., Powder injection molding of PNN-PMN-PZN doped low temperature sintering PZT ceramics, J. Manuf. Process. 28, 235 (2017). DOI: 10.1016/j.jmapro.2017.06.008.
  • S. M. Ani et al., Fabrication of zirconia-toughened alumina parts by powder injection molding process: Optimized processing parameters, Ceram. Int. 40, 273 (2014). DOI: 10.1016/j.ceramint.2013.05.134.
  • F. M. Foudzi et al., Yttria stabilized zirconia formed by micro ceramic injection molding: Rheological properties and debinding effects on the sintered part, Ceram. Int. 39, 2665 (2013). DOI: 10.1016/j.ceramint.2012.09.033.
  • C. Liu et al., Preparation and piezoelectric properties of PLZT piezoelectric ceramic by water-soluble degreasing powder injection molding, J. Chinese Ceram. Soc. 46, 792 (2018) (in Chinese).
  • R. Zhu et al., Ferroelectric phase transition and electrical properties of high-TC PMN-PH-PT ceramics prepared by partial oxalate route, J. Eur. Ceram. Soc. 38 (4), 1463 (2018). DOI: 10.1016/j.jeurceramsoc.2017.10.048.
  • C. Zhao et al., Site engineering and polarization characteristics in (Ba1−yCay)(Ti1?xHfx)O3 lead-free ceramics, J. Appl. Phys. 119 (2), 024108/1–11 (2016). DOI: 10.1063/1.4939762.
  • M.-H. Zhang et al., Thermally stable piezoelectric properties of (K, Na)NbO3-based lead-free perovskite with rhombohedral-tetragonal coexisting phase, Acta. Mater. 122, 344 (2017). DOI: 10.1016/j.actamat.2016.10.011.
  • J. Ji et al., Improving densification and electrical properties of KNN-based lead-free piezoceramics via two-step sintering method, Ferroelectrics. 526 (1), 33 (2018). DOI: 10.1080/00150193.2018.1456270.
  • Y. Cui et al., Lead-free (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3–CeO2 ceramics with high piezoelectric coefficient obtained by low-temperature sintering, Ceram. Int. 38 (6), 4761 (2012).
  • J. Hao et al., Correlation between the microstructure and electrical properties in high-performance (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 Lead-Free Piezoelectric Ceramics, J. Am. Ceram. Soc. 95 (6), 1998 (2012). DOI: 10.1111/j.1551-2916.2012.05146.x.
  • J. Rödel et al., Perspective on the development of lead-free piezoceramics, J. Am. Ceram. Soc. 92 (6), 1153 (2009). DOI: 10.1111/j.1551-2916.2009.03061.x.
  • J.-F. Li et al., (K,Na)NbO3-based lead-free piezoceramics: fundamental aspects, processing technologies, and remaining challenges, J. Am. Ceram. Soc. 96 (12), 3677 (2013). DOI: 10.1111/jace.12715.
  • J. Wu et al., Sintering temperature-induced electrical properties of (Ba0.90Ca0.10)(Ti0.85Zr0.15)O3 lead-free ceramics, Mater. Res. Bull. 47 (5), 1281 (2012). DOI: 10.1016/j.materresbull.2012.01.032.
  • P. Wang, Y. Li, and Y. Lu, Enhanced piezoelectric properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics by optimizing calcination and sintering temperature, J. Eur. Ceram. Soc. 31 (11), 2005 (2011). DOI: 10.1016/j.jeurceramsoc.2011.04.023.
  • C. Liu et al., Improving piezoelectric property of BaTiO3-CaTiO3-BaZrO3 lead-free ceramics by doping, Ceram. Int. 40 (7), 9881 (2014). DOI: 10.1016/j.ceramint.2014.02.082.
  • X. G. Tang, K.-H. Chew, and H. L. W. Chan, Diffuse phase transition and dielectric tunability of Ba(ZryTi1-y)O3 relaxor ferroelectric ceramics, Acta. Mater. 52 (17), 5177 (2004). DOI: 10.1016/j.actamat.2004.07.028.
  • X. Wang et al., Large electrocaloric strength and broad electrocaloric temperature span in lead-free Ba0.85Ca0.15Ti1?xHfxO3 ceramics, RSC Adv. 7 (10), 5813 (2017). DOI: 10.1039/C7RA11658F.
  • Y. Li et al., Effects of Nb, Mn doping on the structure, piezoelectric, and dielectric properties of 0.8Pb(Sn0.46Ti0.54)O3-0.2Pb(Mg1/3Nb2/3)O3 piezoelectric ceramics, J. Am. Ceram. Soc. 96 (11), 3440 (2013). DOI: 10.1111/jace.12479.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.