References
- H. Y. Yu et al., Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber, J. Clean. Prod. 141, 336 (2017). DOI: 10.1016/j.jclepro.2016.09.043.
- M. Garcia-Morales et al., Effect of waste polymer addition on the rheology of modified bitumen, Fuel 85 (7–8), 936 (2006). DOI: 10.1016/j.fuel.2005.09.015.
- G. Polacco et al., Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts, Curr. Opin. Colloid Interf. Sci. 11 (4), 230 (2006). DOI: 10.1016/j.cocis.2006.09.001.
- Y. Yidirim, Polymer modified asphalt binders, Constr. Build. Mater. 21 (1), 66 (2007). DOI: 10.1016/j.conbuildmat.2005.07.007.
- C. Zhu et al., Aging rheological characteristics of SBR modified asphalt with multidimensional nanomaterials, Constr. Build. Mater. 151, 388 (2017). DOI: 10.1016/j.conbuildmat.2017.06.121.
- I. R. Segundo et al., Assessment of photocatalytic, superhydrophobic and self-cleaning properties on hot mix asphalts coated with TiO2 and/or ZnO aqueous solutions, Constr. Build. Mater. 166, 500 (2018). DOI: 10.1016/j.conbuildmat.2018.01.106.
- M. Khattak, A. Khattab, and H. Rizvi, Characterization of carbon nano-fiber modified hot mix asphalt mixtures, Constr. Build. Mater. 40, 738 (2013). DOI: 10.1016/j.conbuildmat.2012.11.034.
- C. S. Chen et al., Preparation and photocatalytic activity of multi-walled carbon nanotubes/Mg-doped ZnO nanohybrids, Mater. Sci. Poland 33 (3), 460 (2015). DOI: 10.1515/msp-2015-0083.
- A. Papadopoulos et al., Effect of CNTs addition on the erosive wear response of epoxy resin and carbon fibre composites, Compos. Part A. Appl. Sci. Manuf. 84, 299 (2016). DOI: 10.1016/j.compositesa.2016.02.012.
- C. Chen et al., Multi-walled carbon nanotubes supported Cu-doped ZnO nanoparticles and their optical property, J. Nanopart. Res. 14 (4), 817 (2012). DOI: 10.1007/s11051-012-0817-5.
- H. L. Zhang et al., Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles, Constr. Build. Mater. 98, 735 (2015). DOI: 10.1016/j.conbuildmat.2015.08.138.
- T. Shirakawa, T. Tada, and N. Okazaki, Development of functional carbon nanotubes-asphalt composites, GEOMATE. 2 (1), 161 (2012). DOI: 10.21660/2012.3.3q.
- E. Santagata et al., Rheological characterization of bituminous binders modified with carbon nanotubes, Proc. Soc. Behav. Sci. 53, 546 (2012). DOI: 10.1016/j.sbspro.2012.09.905.
- I. Amin et al., Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate, Constr. Build. Mater. 121, 361 (2016). DOI: 10.1016/j.conbuildmat.2016.05.168.
- A. A. Mamun, and M. Arifuzzaman, Nano-scale moisture damage evaluation of carbon nanotube-modified asphalt, Constr. Build. Mater. 193, 268 (2018). DOI: 10.1016/j.conbuildmat.2018.10.155.
- C. Chen et al., Preparation and photocatalytic property of multi-walled carbon nanotubes/TiO2 nanohybrids, Funct. Mater. Lett. 06 (02), 1350018 (2013). DOI: 10.1142/S1793604713500185.
- S. Niyogi et al., Chemistry of single-walled carbon nanotubes, Acc. Chem. Res. 35 (12), 1105 (2002). DOI: 10.1021/ar010155r.
- C. Chen et al., Graphene/Multi-walled carbon nanotube composite as an effective supports to enhance the photocatalytic property of Cu-doped ZnO nanoparticles, Funct. Mater. Lett. 6 (6), 1350062 (2013). DOI: 10.1142/S1793604713500628.
- C. S. Chen et al., Multi-walled carbon nanotube supported metal-doped ZnO nanoparticles and their photocatalytic property, J. Nanopart. Res. 15 (1), 1295 (2013). DOI: 10.1007/s11051-012-1295-5.
- R. B. Naik et al., Effect of non-ionic surfactants on thermomechanical properties of epoxy/multi-wall carbon nanotubes composites, Prog. Org. Coat. 77 (11), 1883 (2014). DOI: 10.1016/j.porgcoat.2014.06.024.
- Z. D. Qian, and Q. Lu, Design and laboratory evaluation of small particle porous epoxy asphalt surface mixture for roadway pavements, Constr. Build. Mater. 77, 110 (2015). DOI: 10.1016/j.conbuildmat.2014.12.056.