References
- J. Ho et al., Historical introduction to capacitor technology, IEEE Electr. Insul. Mag. 26 (1), 20 (2010). DOI: https://doi.org/10.1109/MEI.2010.5383924.
- Y. Shen et al., Polymer nanocomposites with high energy storage densities, MRS Bull. 40 (9), 753 (2015). DOI: https://doi.org/10.1557/mrs.2015.199.
- Q. Chen et al., Polymer-based dielectrics with high energy storage density, Annu. Rev. Mater. Res. 45 (1), 433 (2015)., DOI: https://doi.org/10.1146/annurev-matsci-070214-021017.
- T. D. Huan et al., Advanced polymeric dielectrics for high energy density applications, Prog. Mater. Sci 83, 236 (2016). DOI: https://doi.org/10.1016/j.pmatsci.2016.05.001.
- L. Qi et al., Review of recent activities on dielectric films for capacitor applications, J. Int. Counc. Electr. Eng 4 (1), 1 (2014). DOI: https://doi.org/10.5370/JICEE.2014.4.1.001.
- B. Fan et al., Polymer-based materials for achieving high energy density film capacitors, Prog. Polym. Sci 97, 101143 (2019). DOI: https://doi.org/10.1016/j.progpolymsci.2019.06.003.
- L. Han et al., Morphology and properties of biodegradable and biosourced polylactide blends with poly (3‐hydroxybutyrate‐co‐4‐hydroxybutyrate, ), Polym. Compos. 33 (6), 850 (2012). DOI: https://doi.org/10.1002/pc.22213.
- T. Kijchavengkul et al., Biodegradation and hydrolysis rate of aliphatic aromatic polyester, Polym. Degrad. Stabil 95 (12), 2641 (2010). DOI: https://doi.org/10.1016/j.polymdegradstab.2010.07.018.
- E. J. Dil et al., Morphology, miscibility and continuity development in poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends, Polymer 68, 202 (2015). DOI: https://doi.org/10.1016/j.polymer.2015.05.012.
- M. Nofar et al., Effects of the matrix crystallinity, dispersed phase, and processing type on the morphological, thermal, and mechanical properties of polylactide‐based binary blends with poly [(butylene adipate)‐co‐terephthalate] and poly [(butylene succinate)‐co‐adipate, J. Appl. Polym. Sci. 136 (23), 47636 (2019)., ], DOI: https://doi.org/10.1002/app.47636.
- Y. Deng et al., Optimising ductility of poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends through co-continuous phase morphology, J. Polym. Environ. 26 (9), 3802 (2018). DOI: https://doi.org/10.1007/s10924-018-1256-x.
- V. Gigante et al., Rubber toughening of polylactic acid (PLA) with Poly (butylene adipate-co-terephthalate)(PBAT): mechanical properties, fracture mechanics and analysis of ductile-to-brittle behavior while varying temperature and test speed, Eur. Polym. J 115, 125 (2019). DOI: https://doi.org/10.1016/j.eurpolymj.2019.03.015.
- M. Nofar et al., Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies, Eur. Polym. J 90, 231 (2017). DOI: https://doi.org/10.1016/j.eurpolymj.2017.03.031.
- L. Jiang et al. , Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends , Biomacromolecules 7 (1), 199 (2006). DOI: https://doi.org/10.1021/bm050581q.
- X. Li et al., Improvement of compatibility and mechanical properties of the poly (lactic acid)/poly (butylene adipate‐co‐terephthalate) blends and films by reactive extrusion with chain extender, Polym. Eng. Sci. 58 (10), 1868 (2018). DOI: https://doi.org/10.1002/pen.24795.
- N. Bunnak et al., Dielectric properties improvement of polymer composite prepared from poly (vinylidene difluoride) and barium-modified porous clay heterostructure, Electron. Mater. Lett. 9 (3), 315 (2013). DOI: https://doi.org/10.1007/s13391-012-2210-z.
- V. P. Anju et al., High dielectric constant polymer nanocomposite for embedded capacitor applications, Mater. Sci. Eng. B-Solid State Mater. Adv. Technol. 249, 114418 (2019). DOI: https://doi.org/10.1016/j.mseb.2019.114418.
- S. Chotiradsirikun et al., Novel synthesis route of porous clay heterostructures via mixed surfactant template and their dielectric behavior, J. Porous Mater. 28 (1), 117 (2021). DOI: https://doi.org/10.1007/s10934-020-00971-4.
- J. C. Groen et al., Pore size determination in modified micro-and mesoporous materials. Pitfalls and limitations in gas adsorption data analysis, Microporous Mesoporous Mat. 60 (1-3), 1 (2003). DOI: https://doi.org/10.1016/S1387-1811(03)00339-1.
- S. Storck et al., Characterization of micro-and mesoporous solids by physisorption methods and pore-size analysis, Appl. Catal. A-Gen. 174 (1-2), 137 (1998). DOI: https://doi.org/10.1016/S0926-860X(98)00164-1.
- M. Włodarczyk-Stasiak, and J. Jamroz, Specific surface area and porosity of starch extrudates determined from nitrogen adsorption data, J. Food Eng. 93 (4), 379 (2009). DOI: https://doi.org/10.1016/j.jfoodeng.2009.01.041.
- Y. H. Zhang et al., Dielectric and dynamic mechanical properties of polyimide–clay nanocomposite films, Chem. Phys. Lett. 401 (4-6), 553 (2005). DOI: https://doi.org/10.1016/j.cplett.2004.11.084.
- R. Calvet, Dielectric properties of montmorillonites saturated by bivalent cations, Clay Clay Min. 23 (4), 257 (1975). DOI: https://doi.org/10.1346/CCMN.1975.0230401.
- S. S. Karkhanis, and l. M. Matuana, Extrusion blown films of poly(lactic acid) chain-extended with food grade multifunctional epoxies, Polym. Eng. Sci. 59 (11), 2211 (2019). DOI: https://doi.org/10.1002/pen.25224.
- R. Al-Itry et al., Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy, Polym. Degrad. Stabil. 97 (10), 1898 (2012). DOI: https://doi.org/10.1016/j.polymdegradstab.2012.06.028.
- S. Ravati et al., High performance materials based on a self‐assembled multiple‐percolated ternary blend, AIChE J. 60 (8), 3005 (2014). DOI: https://doi.org/10.1002/aic.14495.
- J. R. Sarasua et al., Crystallization and melting behavior of polylactides, Macromolecules 31 (12), 3895 (1998). DOI: https://doi.org/10.1021/ma971545p.
- C. W. Nan et al., Physical properties of composites near percolation, Annu. Rev. Mater. Res. 40 (1), 131 (2010)., DOI: https://doi.org/10.1146/annurev-matsci-070909-104529.
- W. Xia, and Z. Zhang, PVDF-based dielectric polymers and their applications in electronic materials, IET Nanodielectr. 1 (1), 17 (2018). DOI: https://doi.org/10.1049/iet-nde.2018.0001.
- V. K. Thakur, and R. K. Gupta, Recent progress on ferroelectric polymer-based nanocomposites for high energy density capacitors: synthesis, dielectric properties, and future aspects, Chem. Rev 116 (7), 4260 (2016). DOI: https://doi.org/10.1021/acs.chemrev.5b00495.
- Z. Ahmad, Polymer Dielectric Materials, Dielectric Material, Marius Alexandru Silaghi (IntechOpen, Rijeka, Croatia 3 October 2012). https://www.intechopen.com/chapters/39574 (accessed Feb. 22, 2021).