References
- X. Gao et al., Piezoelectric actuators and motors: materials, designs, and applications, Adv. Mater. Technol. 5 (1), 1900716 (2020). DOI: https://doi.org/10.1002/admt.201900716.
- L. Wang et al., A review of recent studies on non-resonant piezoelectric actuators, Mech. Syst. Signal Proc. 133, 106254 (2019). DOI: https://doi.org/10.1016/j.ymssp.2019.106254.
- K. Uchino, and S. Takahashi, Multilayer ceramic actuators, Curr. Opin. Solid State Mater. Sci. 1 (5), 698 (1996). DOI: https://doi.org/10.1016/S1359-0286(96)80054-4.
- Q. Wang, and F. Li, A low-working-field (2 kV/mm), large-strain (>0.5%) piezoelectric multilayer actuator based on periodically orthogonal poled PZT ceramics, Sens. Actuators A Phys. 272, 212 (2018). DOI: https://doi.org/10.1016/j.sna.2018.01.042.
- J. Hao et al., Progress in high-strain perovskite piezoelectric ceramics, Mat. Sci. Eng. R. 135, 1 (2019). DOI: https://doi.org/10.1016/j.mser.2018.08.001.
- E. Sawaguchi, Ferroelectricity versus antiferroelectricity in the solid solutions of PbZrO3 and PbTiO3, J. Phys. Soc. Jpn. 8 (5), 615 (1953). DOI: https://doi.org/10.1143/JPSJ.8.615.
- B. Jaffe, R. S. Roth, and S. Marzullo, Piezoelectric properties of lead zirconate‐lead titanate solid‐solution ceramics, J. Appl. Phys. 25 (6), 809 (1954). DOI: https://doi.org/10.1063/1.1721741.
- T. Ibn-Mohammed, Life cycle assessment and environmental profile evaluation of lead-free piezoelectrics in comparison with lead zirconate titanate, J. Eur. Ceram. Soc. 38, 15 (2018). DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.06.044.
- J. Chen et al., The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(ZrxTi1−x)O3 multilayer piezoceramic actuator, Ceram. Int. 47, 11 (2021). DOI DOI: https://doi.org/10.1016/j.ceramint.2021.02.081.
- T. Hungra et al., Spark plasma sintering as a useful technique to the nanostructuration of piezo-ferroelectric materials, Adv. Eng. Mater. 11, 615 (2009). DOI: https://doi.org/10.1002/adem.200900052.
- Z. A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi, The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method, J. Mater. Sci. 41 (3), 763 (2006). DOI: https://doi.org/10.1007/s10853-006-6555-2.
- A. Reisman et al., Reactions of the group VB pentoxides with alkali oxides and carbonates. VII. Heterogeneous equilibria in the system Na2O or Na2CO3-Nb2O5, J. Am. Chem. Soc. 80 (1), 37 (1958). DOI: https://doi.org/10.1111/j.1551-2916.2005.00743.x.
- R. Wang et al., Fabrication and characterization of potassium–sodium niobate piezoelectric ceramics by spark-plasma-sintering method, Mater. Res. Bull. 39, 11 (2004). DOI: https://doi.org/10.1016/j.materresbull.2004.05.007.
- A. K. Gupta, and A. Sil, Phase composition and dielectric properties of spark plasma sintered PbZr0.52Ti0.48O3, Mater. Res. Express 7 (3), 036301 (2020). DOI: https://doi.org/10.1088/2053-1591/ab7911.
- L. Q. Cheng et al., Significantly improved piezoelectric performance of PZT-PMnN ceramics prepared by spark plasma sintering, RSC Adv. 8 (62), 35594 (2018). DOI: https://doi.org/10.1039/C8RA06421K.
- B. Han et al., Temperature-insensitive piezoelectric performance in Pb(Zr0.52Ti0.42Sn0.02Nb0.04)O3 ceramics prepared by spark plasma sintering, ACS Appl. Mater. Interf. 9, 39 (2017). DOI: https://doi.org/10.1021/acsami.7b09825.
- V. R. Mudinepalli et al., Dielectric and ferroelectric studies on high dense Pb(Zr0.52Ti0.48)O3 nanocrystalline ceramics by high energy ball milling and spark plasma sintering, Ceramics 2 (1), 13 (2019). DOI: https://doi.org/10.3390/ceramics2010002.
- T. Ibn-Mohammed et al., Decarbonising ceramic manufacturing: A techno-economic analysis of energy efficient sintering technologies in the functional materials sector, J. Eur. Ceram. Soc. 39, 16 (2019). DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.08.011.
- M. A. Marakhovsky et al., Comparative study of the hard and soft PZT-based ceramics sintered by various methods, Ferroelectrics 575, 1 (2021). DOI: https://doi.org/10.1080/00150193.2021.1888225.
- Q. Y. Jiang et al., Effects of porosity on electric fatigue behaviour in PLZT and PZT ferroelectric ceramics, J. Mater. Sci. 28 (16), 4536 (1993). DOI: https://doi.org/10.1007/BF01154968.
- C. A. Randall et al., Intrinsic and extrinsic size effects in fine‐grained morphotropic‐phase‐boundary lead zirconate titanate ceramics, J. Am. Ceram. Soc. 81, 3 (1998). DOI: https://doi.org/10.1111/j.1151-2916.1998.tb02389.x.
- T. M. Kamel et al., Grain size effect on the poling of soft Pb(Zr,Ti)O3 ferroelectric ceramics, J. Eur. Ceram. Soc. 28, 4 (2008). DOI: https://doi.org/10.1016/j.jeurceramsoc.2007.08.010.
- H. T. Martiren et al., Grain-size effects on properties of some ferroelectric ceramics, Phys. C Solid State Phys. 7, 3182 (1974). DOI: https://doi.org/10.1088/0022-3719/7/17/024.
- V. V. Eremkin et al., Microstructure effect on the properties of electrostrictive Pb(Mg1/3Nb2/3) O3-PbTiO3 ceramics, Inorg. Mater. 45 (10), 1197 (2009). DOI: https://doi.org/10.1134/S0020168509100215.
- Y. Zhang et al., Understanding the effect of porosity on the polarization-field response of ferroelectric materials, Acta Mater. 154, 100 (2018). DOI: https://doi.org/10.1016/j.actamat.2018.05.007.
- M. V. Talanov et al., Effect of sintering temperature on the density, piezodielectric response, and mechanical and elastic properties of materials of different functional groups, Inorg. Mater. 48 (4), 386 (2012). DOI: https://doi.org/10.1134/S0020168512040188.
- W. Cao, and C. A. Randall, Grain size and domain size relations in bulk ceramic ferroelectric materials, J. Phys. Chem. Solids 57 (10), 1499 (1996). DOI: https://doi.org/10.1016/0022-3697(96)00019-4.