References
- IEEE Standards on Piezoelectric. SU 31 Part II, ANSI-IEEE Standards, 176, New York, 1984 and 1987.
- L. Pardo et al., shear resonance mode decoupling to determine the characteristic matrix of piezoceramics for 3D-modelling, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 58 (3), 646 (2011). DOI: 10.1109/TUFFC.2011.1848.
- S. Sherrit et al., Determination of the reduced matrix of the piezoelectric, dielectric, elastic material constants for a piezoelectric material symmetry, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 58 (9), 1714 (2011). DOI: 10.1109/TUFFC.2011.2008.
- M. Brissaud, Three-dimensional modelling for rings and tubes piezoceramics, Ultrasonics International 89, Conf. Proceedings, 647–652 (1989).
- M. Brissaud, Characterization of piezoceramics, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 38 (6), 603–617 (1991). DOI: 10.1109/58.108859.
- D. D. Ebenezer, and R. Ramesh, Exact analysis of axially polarized piezoelectric ceramic cylinders with certain uniform boundary conditions, Curr. Sci. 85 (8), 1173 (2003).
- R. Ramesh, and D. D. Ebenezer, Analysis of axially polarized piezoelectric cylinders with arbitrary boundary conditions on flat surfaces, J. Acoust. Soc. Am. 113 (4 Pt 1), 1900 (2003). DOI: 10.1121/1.1560171.
- D. D. Ebenezer et al., Forced responses of solid axially polarized piezoelectric ceramic finite cylinders with internal losses, J. Acoust. Soc. Am. 117 (6), 3645 (2005). DOI: 10.1121/1.1900543.
- S. J. Rupitsch, and R. Lerch, Inverse method to estimate material parameters for piezoceramic disk actuator, Appl. Phys. A 97 (4), 735 (2009). DOI: 10.1007/s00339-009-5438-1.
- Y. Dong et al., A novel Method for characterization of piezoelectric Material Parameters by Simulated Annealing Optimization, IEEE TUFFC 57 (12), 2613 (2010).
- N. Pérez et al., Identification of Elastic, dielectric and Piezoelectric Constants in Piezoelectric Disks, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 57 (12), 2772 (2010). DOI: 10.1109/TUFFC.2010.1751.
- J. S. Yang, and R. C. Batra, Thickness shear vibration of a circular cylindrical piezoelectric shell, J. Acoust. Soc. Am. 97 (1), 309–312 (1995).
- L. Shuyu, Thickness shearing vibration of the tangentially polarized piezoelectric ceramic thin circular ring, J. Acoust. Soc. Am. 107 (5, PT. 1), 2487 (2000). DOI: 10.1121/1.428636.
- M. Brissaud, Three-dimensional modeling of piezoelectric materials, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 57 (9), 2051 (2010). DOI: 10.1109/TUFFC.2010.1653.
- M. Brissaud, Characterization of rectangular and cylindrical piezoceramics using three-dimensional modelling, Ferroelectrics 500 (1), 259 (2016). DOI: 10.1080/00150193.2016.1229533.
- X. F. Zhang et al., Effects of radial stress on piezoelectric ceramic tubes and transduces, J. Acoust. Soc. Am. 151 (1), 434 (2022). DOI: 10.1121/10.0009319.
- M. Boz et al., Design, finite element analysis, fabrication and electroacoustic characterization transducer arrays from piezoceramics with hollow cylindrical shell, Ferroelectrics 586 (1), 93 (2022). DOI: 10.1080/00150193.2021.2014262.
- S. Wolfram, MATHEMATICA, Cambridge University (1999).
- MATLAB Software. The Mathworks Corporation (2020).
- Saint Gobain-Quartz & Silice. Piezoelectric Ceramics (1995).