References
- Luyben, W.L., “Simple Method for Tuning SISO Controllers in Multivariable Systems”, Ind. Eng. Chem. Process Des. Dev., 25, pp. 654–660 (1986). doi: 10.1021/i200034a010
- Astrom, K. and Hagglund, T., “Automatic Tuning of Simple Regulators with Specifications on Phase and Amplitude Margins”, Automatica, 20, pp. 645–651 (1984). doi: 10.1016/0005-1098(84)90014-1
- Atherton, D.P., Non-linear Control Engineering, Van Nostrand Rienhold, London (1975).
- Balasubramanian, R. and Atherton, D.P., “Limit Cycles in Systems with Single and Multiple Relays”, In Proc. JACC, San Francisco, pp. FP9-D, 1980.
- Wadey, M.D. and Atherton, D.P., “Periodic Modes in Multivariable Systyem with Relay and Saturation Elements”, In Proc. Symp. on application of multivariable system techniques, Plymouth, UK, 1984.
- Halevi, Y., Palmor, Z. and Efrati, T., “Automatic Tuning of Decentralized PID Controllers for MIMO Processes”, J. Proc. Cont., 7, pp. 119–128 (1997). doi: 10.1016/S0959-1524(97)82769-2
- Shiu, S.J., Huang, S. and Lin, M., “Automatic Tuning of Systems with One or Two Unstable poles”, Chem. Engg. Commun., 167, pp. 51–72 (1998). doi: 10.1080/00986449808912693
- Nikita, S. and Chidambaram, M., “Improved Relay Autotuning of PID Controllers for Unstable SOPTD Systems”, Chem. Engg. Commun. (2015). DOI:10.1080/00986445.2015.1103229 (accepted).
- Yu, C.C., Auto Tuning of PID Controllers – A Relay Feedback Approach, Springer, New York (2006).
- Luyben, W.L. and Luyben, M.L., Essentials of Process Control, McGraw Hill, New York (1997).
- Chidambaram, M., Applied Process Control, Allied Publishers Ltd., New Delhi (1998).
- Dhanyaram, V., Rajapandian, C. and Chidambaram, M., “Steady State Gain Identification and Control of Multivariable Unstable Systems”, Chem. Engg. Commun., pp. 151–162 (2014).
- Ganesh, D.S. and Chidambaram, M., “Identification of Multivariable System Using Relay Tuning”, Chem. BioChem. Engg. Q., pp. 153–158 (2005).
- Vivek, S. and Chidambaram, M., “An Improved Auto Tuning of PID Controllers for Unstable FOPTD System”, Comp. & Chem. Engg., 29, pp. 2060–2068 (2005). doi: 10.1016/j.compchemeng.2005.05.004
- Lin, F., Jeng, J. and Huang, H., “Multivariable Control with Generalized Decoupling for Disturbance Rejection”, Ind. Eng. Chem. Res., 48, pp. 9175–9185 (2009). doi: 10.1021/ie801477z
- Govindhakannan, J. and Chidambaram, M., “Multivariable PI Control of Unstable Systems”, Process Control and Quality, 10, pp. 319–329 (1997).
- Hovd, M. and Skogestad, S., “Pairing Criteria for Decentralized Control of Unstable plants”, Ind. Eng. Chem. Res., 33(9), pp. 2134–2139 (1994). doi: 10.1021/ie00033a016
- Hazarika, S. and Chidambaram, M., “Design of Proportional Integral Controllers with Decouplers for Unstable Two Input Two Output System”, Ind. Eng. Chem. Res, 53, pp. 6467–6476 (2014). doi: 10.1021/ie403791q
- Ziegler, J.G. and Nichols, N.B., “Optimum Settings for Automatic Controllers”, Trans. ASME, 64, pp. 759–768 (1942).
- Smith, C.L., “Intelligently Tune PID Controllers”, Part 2, Chem. Eng., 10 , pp. 54–59 (2003).