Control loop performance assessment for unstable time delay processes subjected to ramp changes

References

• Ranganayakulu R., Rao A.S. and Babu G.U.B., “Improved Fractional Filter IMC–PID Controller Design for Enhanced Performance of Integrating Plus Time Delay Processes”, Indian Chem. Eng., 62(2), pp. 184–201 (2020).
   Google Scholar
• Vilanova R. and Visioli A., PID Control in the Third Millennium, Springer, London (2012).
   Google Scholar
• Verma B. and Padhy P.K., “Robust Fine Tuning of Optimal PID Controller With Guaranteed Robustness”, IEEE Trans. Ind. Electron., 67(no. 6), pp. 4911–4920 (2020).
   Web of Science ®Google Scholar
• Hakimzadeh A. and Ghaffari V., “Designing of non-Fragile Robust Model Predictive Control for Constrained Uncertain Systems and its Application in Process Control”, J. Process Control, 95, pp. 86–97 (2020).
   Web of Science ®Google Scholar
• Jana A.K., “Nonlinear State Estimation and Generic Model Control of a Continuous Stirred Tank Reactor”, Int. J. Chem. React. Eng., 5, (2007).
   Web of Science ®Google Scholar
• Jana A.K., “Differential Geometry-Based Adaptive Nonlinear Control Law: Application to an Industrial Refinery Process”, IEEE Trans. Ind. Inform., 9(no. 4), pp. 2014–2022 (2013).
   Web of Science ®Google Scholar
• Soroush M. and Kravaris C., “Discrete-time Nonlinear Feedback Control of Multivariable Processes”, AIChE J., 42(1), pp. 187–203 (1996).
   Web of Science ®Google Scholar
• Borase R.P., D.K. Maghade, S.Y. Sondkar and S.N. Pawar., “A Review of PID Control, Tuning Methods and Applications”, Int. J. Dyn. Control., 9, pp. 818–827 (2020).
   Google Scholar
• Harris T.J., “Assessment of Control Loop Performance”, Can. J. Chem. Eng, 67, pp. 856–861 (1989).
   Web of Science ®Google Scholar
• Ko B.-S. and Edgar T.F., “PID Control Performance Assessment: The Single-Loop Case”, AIChE J., 50(no. 6), pp. 1211–1218 (2004).
   Web of Science ®Google Scholar
• Hugo A.J., “Performance Assessment of Single-Loop Industrial Controllers”, J. Process Control, 16(8), pp. 785–794 (2006).
   Web of Science ®Google Scholar
• Sendjaja A.Y. and Kariwala V., “Achievable PID Performance Using Sums of Squares Programming”, J. Process Control, 19(no. 6), pp. 1061–1065 (2009).
   Web of Science ®Google Scholar
• Fu R., Xie L., Song Z. and Cheng Y., “PID Control Performance Assessment Using Iterative Convex Programming”, J. Process Control, 22(no. 9), pp. 1793–1799 (2012).
   Web of Science ®Google Scholar
• Hägglund T., “Industrial Implementation of On-line Performance Monitoring Tools”, Control Eng. Pract., 13(no. 11), pp. 1383–1390 (2005).
   Web of Science ®Google Scholar
• Visioli A., “Method for Proportional-Integral Controller Tuning Assessment”, Ind. Eng. Chem. Res., 45(no. 8), pp. 2741–2747 (2006).
   Web of Science ®Google Scholar
• Salsbury T.I., “A Practical Method for Assessing the Performance of Control Loops Subject to Random Load Changes”, J. Process Control, 15(4), pp. 393–405 (2005).
   Web of Science ®Google Scholar
• Howard R. and Cooper D., “A Novel Pattern-Based Approach for Diagnostic Controller Performance Monitoring”, Control Eng. Pract, 18(3), pp. 279–288 (2010).
   Web of Science ®Google Scholar
• Huang H.-P. and Jeng J.-C., “Monitoring and Assessment of Control Performance for Single Loop Systems”, Ind. Eng. Chem. Res., 41(no. 5), pp. 1297–1309 (2002).
   Web of Science ®Google Scholar
• Swanda A.P. and Seborg D.E., “Controller Performance Assessment Based on Setpoint Response Data”, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251), 6, pp. 3863–3867 (1999).
   Google Scholar
• Veronesi M. and Visioli A., “An Industrial Application of a Performance Assessment and Retuning Technique for PI Controllers”, ISA Trans., 49(2), pp. 244–248 (2010).
   PubMed Web of Science ®Google Scholar
• Veronesi M. and Visioli A., “Performance Assessment and Retuning of PID Controllers”, Ind. Eng. Chem. Res., 48(no. 5), pp. 2616–2623 (2009).
   Web of Science ®Google Scholar
• Veronesi M. and Visioli A., “Performance Assessment and Retuning of PID Controllers for Integral Processes”, J. Process Control, 20(3), pp. 261–269 (2010).
   Web of Science ®Google Scholar
• Yu Z., J. Wang, Huang B. and Bi Z., “Performance Assessment of PID Control Loops Subject to Setpoint Changes”, J. Process Control, 21(no. 8), pp. 1164–1171 (2011).
   Web of Science ®Google Scholar
• Yu Z. and Wang J., “Assessment of Proportional-Integral Control Loop Performance for Input Load Disturbance Rejection”, Ind. Eng. Chem. Res., 51(no. 36), pp. 11744–11752 (2012).
   Web of Science ®Google Scholar
• Yu Z., Wang J., Huang B., Li J. and Bi Z., “Performance Assessment of Industrial Linear Controllers in Univariate Control Loops for Both Set Point Tracking and Load Disturbance Rejection”, Ind. Eng. Chem. Res., 53(27), pp. 11050–11060 (2014).
   Web of Science ®Google Scholar
• Zhang J., Zhang L., Chen J., Xu J. and Li K., “Performance Assessment of Cascade Control Loops with non-Gaussian Disturbances Using Entropy Information”, Chem. Eng. Res. Des, 104, pp. 68–80 (2015).
   Web of Science ®Google Scholar
• de Francisco D., Trierweiler J.O. and Farenzena M., “A Novel PID Autotuning Approach: how to Correct bad Tuning by Closed-Loop Performance Assessment”, IFAC-PapersOnLine, 52(1), pp. 184–189 (2019).
   Google Scholar
• Liu R., Li Y., O’Neill Z.D. and Zhou X., “Development of Control Quality Factor for HVAC Control Loop Performance Assessment—II: Field Testing and Results (ASHRAE RP-1587)”, Sci. Technol. Built Environ, 25(7), pp. 873–888 (2019).
   Web of Science ®Google Scholar
• Gao X., Yang F., Shang C. and Huang D., “A Novel Data-driven Method for Simultaneous Performance Assessment and Retuning of PID Controllers”, Ind. Eng. Chem. Res., 56(8), pp. 2127–2139 (2017).
   Web of Science ®Google Scholar
• Domański P.D., Control Performance Assessment: Theoretical Analyses and Industrial Practice, Springer, Cham (2020).
   Google Scholar
• Sree R.P. and Chidambaram M., Control of Unstable Single and Multi-variable Systems, Narosa Publishers, New Delhi (2017).
   Google Scholar
• Rao A.S., Rao V.S.R. and Chidambaram M., “Simple Analytical Design of Modified Smith Predictor with Improved Performance for Unstable First-Order Plus Time Delay (FOPTD) Processes”, Ind. Eng. Chem. Res., 46(no. 13), pp. 2561–2571 (2007).
   Web of Science ®Google Scholar
• Nasution A.A., Jeng J.-C. and Huang H.-P., “Optimal H2 IMC-PID Controller with Set-point Weighting for Time-delayed Unstable Processes”, Ind. Eng. Chem. Res., 50(8), pp. 4567–4578 (2011).
   Web of Science ®Google Scholar
• Cho W., Lee J. and Edgar T.F., “Simple Analytic Proportional-Integral-Derivative (PID) Controller Tuning Rules for Unstable Processes”, Ind. Eng. Chem. Res, 53(no. 13), pp. 5048–5054 (2014).
   Web of Science ®Google Scholar
• Begum K.G., Rao A.S. and Radhakrishnan T.K., “Performance Assessment of Control Loops Involving Unstable Systems for Set Point Tracking and Disturbance Rejection”, J. Taiwan Inst. Chem. Eng, 85, pp. 1–17 (2018).
   Web of Science ®Google Scholar
• Ananth I. and Chidambaram M., “Closed-loop Identification of Transfer Function Model for Unstable Systems”, J. Franklin Inst., 336(no. 7), pp. 1055–1061 (1999).
   Web of Science ®Google Scholar
• Onat C., “A New Design Method for PI–PD Control of Unstable Processes with Dead Time”, ISA Trans., 84, pp. 69–81 (2019).
   PubMed Web of Science ®Google Scholar