Development of Al₂O₃-SiO₂ based magnetic abrasive by sintering method and its performance on Ti-6Al-4V during magnetic abrasive finishing

References

• V. K. Jain: Advanced machining processes. New Delhi: Allied Publishers, 2013.
   Google Scholar
• R. K. Singh, D. K. Singh and S. Gangwar: Advances in Magnetic Abrasive Finishing for Futuristic Requirements - A Review. Mater. Today Proc., 2018, 5, 20455–20463. doi:10.1016/j.matpr.2018.06.422.
   Google Scholar
• S. K. Amnieh, P. Mosaddegh and T. A. Fadaei: Study on magnetic abrasive finishing of spiral grooves inside of aluminum cylinders. Int. J. Adv. Manuf. Technol., 2017, 91, 2885–2894. doi:10.1007/s00170-016-9970-9.
   Web of Science ®Google Scholar
• A. Srivastava, H. Kumar and S. Singh: Investigations into Internal Surface Finishing of Titanium (Grade 2) Pipe with Extended Magnetic Tool. Procedia Manuf., 2018, 26, 181–189. doi:10.1016/j.promfg.2018.07.025.
   Google Scholar
• G. C. Verma, P. Kala and P. M. Pandey: Experimental investigations into internal magnetic abrasive finishing of pipes. Int. J. Adv. Manuf. Technol., 2017, 88, 1657–1668. doi:10.1007/s00170-016-8881-0.
   Web of Science ®Google Scholar
• J. Guo, K. Liu, Z. Wang and G. L. Tnay: Magnetic field-assisted finishing of a mold insert with curved microstructures for injection molding of microfluidic chips. Tribol. Int., 2017, 114, 306–314. doi:10.1016/j.triboint.2017.04.019.
   Web of Science ®Google Scholar
• F. Y. Cheung, Z. F. Zhou, A. Geddam and K. Y. Li: Cutting edge preparation using magnetic polishing and its influence on the performance of high-speed steel drills. J. Mater. Process. Technol., 2008, 208, 196–204. doi:10.1016/j.jmatprotec.2007.12.108.
   Web of Science ®Google Scholar
• V. K. Jain: Magnetic field assisted abrasive based micro-/nano-finishing. J. Mater. Process. Technol., 2009, 209, 6022–6038. doi:10.1016/j.jmatprotec.2009.08.015.
   Web of Science ®Google Scholar
• D. K. Singh, V. K. Jain, V. Raghuram and R. Komanduri: Analysis of surface texture generated by a flexible magnetic abrasive brush. Wear, 2005, 259, 1254–1261. doi:10.1016/j.wear.2005.02.030.
   Web of Science ®Google Scholar
• R. S. Mulik, V. Srivastava and P. M. Pandey: Experimental Investigations and Modeling of Temperature in the Work-Brush Interface during Ultrasonic Assisted Magnetic Abrasive Finishing Process. Mater. Manuf. Process., 2012, 27, 1–9. doi:10.1080/10426914.2010.515647.
   Web of Science ®Google Scholar
• P. Kala, P. M. Pandey, G. C. Verma and V. Sharma: Understanding flexible abrasive brush behavior for double disk magnetic abrasive finishing based on force signature. J. Manuf. Process., 2017, 28, 442–448. doi:10.1016/j.jmapro.2017.04.010.
   Web of Science ®Google Scholar
• G. W. Chang, B.-H. Yan and R. T. Hsu: Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives. Int. J. Mach. Tools Manuf., 2002, 42, 575–583. doi:10.1016/S0890-6955(01)00153-5.
   Web of Science ®Google Scholar
• H. Yamaguchi and K. Hanada: Development of Spherical Magnetic Abrasive Made by Plasma Spray.J. Manuf. Sci. Eng., 2008, 130, 031107-1–031107–9. doi:10.1115/1.2917353.
   Web of Science ®Google Scholar
• R. S. Mulik and P. M. Pandey: Experimental Investigations and Modeling of Finishing Force and Torque in Ultrasonic Assisted Magnetic Abrasive Finishing. J. Manuf. Sci. Eng., 2012, 134, 051008. doi:10.1115/1.4007131.
   Web of Science ®Google Scholar
• V. C. Shukla, P. M. Pandey, U. S. Dixit, A. Roy and V. Silberschmidt: Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder. Wear, 2017, 390-391, 11–22. doi:10.1016/j.wear.2017.06.017.
   Web of Science ®Google Scholar
• J. Guo, K. H. Au, C. N. Sun, M. H. Goh, C. W. Kum, K. Liu, J. Wei, H. Suzuki and R. Kang: Novel rotating-vibrating magnetic abrasive polishing method for double-layered internal surface finishing. J. Mater. Process. Technol., 2019, 264, 422–437. doi:10.1016/j.jmatprotec.2018.09.024.
   Web of Science ®Google Scholar
• V. K. Jain, D. K. Singh and V. Raghuram: Analysis of performance of pulsating flexible magnetic abrasive brush (P-FMAB). Mach. Sci. Technol., 2008, 12, 53–76. doi:10.1080/10910340701883538.
   Web of Science ®Google Scholar
• S. Ahmad, R. M. Singari and R. S. Mishra: Modelling and optimisation of magnetic abrasive finishing process based on a non-orthogonal array with ANN-GA approach. Trans. IMF, 2020, 98, 186–198. doi:10.1080/00202967.2020.1776966.
   Google Scholar
• W. Li, X. Li, S. Yang and W. Li: A newly developed media for magnetic abrasive finishing process: Material removal behavior and finishing performance. J. Mater. Process. Technol., 2018, 260, 20–29. doi:10.1016/j.jmatprotec.2018.05.007.
   Web of Science ®Google Scholar
• A. C. Wang and S. J. Lee: Study of the characteristics of magnetic finishing with gel abrasive. Int. J. Mach. Tools Manuf., 2009, 49, 1063–1069. doi:10.1016/j.ijmachtools.2009.07.009.
   Web of Science ®Google Scholar
• M. Fox, K. Agrawal, T. Shinmura and R. Komanduri: Magnetic Abrasive Finishing of Rollers. CIRP Ann., 1994, 43, 181–184. doi:10.1016/S0007-8506(07)62191-X.
   Google Scholar
• Y. Gao, Y. Zhao and G. Zhang: Preparation of Al2O3 magnetic abrasives by gas-solid two-phase double-stage atomization and rapid solidification. Mater. Lett., 2018, 215, 300–304. doi:10.1016/j.matlet.2017.12.124.
   Web of Science ®Google Scholar
• Y. Gao, Y. Zhao, G. Zhang, G. Zhang and F. Yin: Polishing of paramagnetic materials using atomized magnetic abrasive powder. Mater. Manuf. Process., 2019, 34, 604–611. doi:10.1080/10426914.2018.1532087.
   Web of Science ®Google Scholar
• S. Singh, P. Singh and H. S. Shan. Comparative Evaluation of Mechanically Alloyed and Sintered Magnetic Abrasives for Fine Finishing. In: 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12–14, 2014, IIT Guwahati, Assam, India.
   Google Scholar
• G. Zhang, Y. Zhao, D. Zhao, F. Yin and Z. Zhao: Preparation of white alumina spherical composite magnetic abrasive by gas atomization and rapid solidification. Scr. Mater., 2011, 65, 416–419. doi:10.1016/j.scriptamat.2011.05.021.
   Web of Science ®Google Scholar
• S. Ahmad, S. Gangwar, P. C. Yadav and D. K. Singh: Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process. Mater. Manuf. Process., 2017, 32, 1723–1729. doi:10.1080/10426914.2017.1279307.
   Web of Science ®Google Scholar
• X. Teng, G. Zhang, Y. Zhao, Y. Cui, L. Li and L. Jiang: Study on magnetic abrasive finishing of AlSi10Mg alloy prepared by selective laser melting. Int. J. Adv. Manuf. Technol., 2019, 105, 2513–2521. doi:10.1007/s00170-019-04485-5.
   Web of Science ®Google Scholar
• J. Guo, H. Wang, M. Goh and K. Liu: Investigation on Surface Integrity of Rapidly Solidified Aluminum RSA 905 by Magnetic Field-Assisted Finishing. Micromachines, 2018, 9, 146. doi:10.3390/mi9040146.
   PubMed Web of Science ®Google Scholar
• D. K. Singh, V. K. Jain and V. Raghuram: On the performance analysis of flexible magnetic abrasive brush. Mach. Sci. Technol., 2005, 9, 601–619. doi:10.1080/10910340500398217.
   Web of Science ®Google Scholar
• J. Guo, Z. E. Tan, K. H. Au and K. Liu: Experimental investigation into the effect of abrasive and force conditions in magnetic field-assisted finishing. Int. J. Adv. Manuf. Technol., 2017, 90, 1881–1888. doi:10.1007/s00170-016-9491-6.
   Web of Science ®Google Scholar