Influence of picoseconds laser irradiation on the properties of black chromium obtained in a trivalent chromium bath

References

• C. G. Granqvist and G. A. Niklasson: Solar energy materials for thermal applications: A primer. Sol. Ener. Mater. Sol. Cells., 2018, 180, 213–226.
   Google Scholar
• Z.-P. Yang, L. Ci, J. A. Bur, S.-Y. Lin and P. M. Ajayan: Experimental observation of an extremely dark material made by a low-density nanotube array. Nano Lett., 2008, 8, 446–451.
   PubMed Web of Science ®Google Scholar
• K. Mizuno, J. Ishii, H. Kishida, Y. Hayamizu, S. Yasuda, D. N. Futaba, M. Yumura and K. Hata: A black body absorber from vertically aligned single-walled carbon nanotubes. PNAS, 2009, 106(15), 6044–6047.
   PubMed Web of Science ®Google Scholar
• F. Liu, F. Xing and Z. You: Preparation of Ni-P alloys super-black materials applied to baffle surface. Surf. Eng., 2017, 34, 892–899.
   Google Scholar
• A. Cao, X. Zhang, C. Xu, B. Wei and D. Wu: Tandem structure of aligned carbon nanotubes on Au and its solar thermal absorption. Sol. Ener. Mater. Sol. Cells., 2002, 70, 481–486.
   Google Scholar
• K. Cui and B. L. Wardle: Breakdown of native oxide enables multifunctional, free-from carbon nanotube-metal hierarchical architectures. ACS Appl. Mater. Interface, 2019, 11, 35212–35220.
   PubMedGoogle Scholar
• C. E. Kennedy: Review of Mid- to High-Temperature Solar Selective Absorber Materials, Technical Report. National Renewable Energy Laboratory, 2002, 52. https://www.nrel.gov/docs/fy02osti/31267.pdf
   Google Scholar
• S. Klamlich, O. Nemraoui, N. Mongwaketsi, R. McCrindle, N. Cingo and M. Maaza: Black Cr/α-Cr2O3 nanoparticles based solar absorbers. Phys. B., 2012, 407(10), 1509–1512.
   Google Scholar
• A. Lasagni, M. Nejati, R. Clasen and F. Mücklich: Periodical surface structuring of metals by laser interference metallurgy as a new fabrication method of textured solar selecctive absorbers. Adv. Eng. Mater., 2006, 8, 580–584.
   Web of Science ®Google Scholar
• Y.-H. Liu, Y.-K. Tseng and C.-W. Cheng: Direct fabrication of rotational femtosecond laser-induced periodic surface structure on a tilted stainless steel surface. Opt. Laser Tech., 2021, 134, 106648.
   Google Scholar
• D. He, C. He, L. Shang, L. Wang and G. Zhang: Tribological behaviors of in-situ DLC films under dry and lubricated conditions. Appl. Surf. Sci., 2020, 525, 146581.
   Google Scholar
• M. Gedvilas, B. Voisiat and G. Račiukaitis: Grayscale marking of anodized aluminium plate by using picoseconds laser and galvanometer scanner. J. Laser Micro/Nanoeng., 2014, 9, 267–270.
   Google Scholar
• A. Y. Vorobyev and C. Guo: Effects of nanostructure-covered femtosecond laser-induced periodic surface structures on optical absorptance of metals. Appl. Phys. A., 2007, 86, 321–324.
   Web of Science ®Google Scholar
• V. V. Iyengar, B. K. Nayak and M. C. Gupta: Ultralow reflectance metal surfaces by ultrafast laser texturing. Appl. Opt., 2010, 49, 5983–5988.
   Google Scholar
• P. Gečys, A. Vinčiūnas, M. Gedvilas, A. Kasparaitis, R. Lazdinas and G. Račiukaitis: Ripple formation laser pulses for enhanced absorptance of stainless steel. J. Laser Micro/Nanoeng., 2015, 10, 129–133.
   Google Scholar
• K. Lee and H. Ki: Femtosecond laser patterning based on the control of surface reflectance. Appl. Surf. Sci, 2019, 494, 187–195.
   Web of Science ®Google Scholar
• C. G. Moura, O. Carvalho, L. M. V. Gonçalves, M. F. Cerqueira, R. Nascimento and F. Silva: Laser surface texturing of Ti-6Al-4V by nanosecond laser: Surface characterization, Ti-oxide layer analysis and its electrical insulation performance. Mater. Sci. and Eng. C., 2019, 104, 109901.
   Google Scholar
• X. Zheng, B. Zhao, J. Yang, Y. Lei, T. Zou and C. Guo: Noncollinear excitation of surface plasmons for triangular structure formation on Cr surfaces by femtosecond lasers. Appl. Surf. Sci., 2020, 507, 144932.
   Google Scholar
• J. Wu, Y. Liu, W. Chena, Y. Zhao, Q. Chen, H. Tang, Y. Wang and X. Du: Influence of different-sized inverted-pyramids of silicon texture by Ag manipulation on solar cell performance. Appl. Surf. Sci., 2020, 506, 144778.
   Google Scholar
• F. M. H. Korany, M. F. O. Hameed, M. Hussein, M. Mubarak, M. I. Eladawy and S. S. A. Obayya: Conical structures for highly efficient solar cell applications. J. Nanoph., 2018, 12, 016019.
   Google Scholar
• S. Survilienė, A. Češūnienė, V. Jasulaitienė and I. Jurevičiūtė: Investigation of the surface composition of electrodeposited black chromium by X-ray photoelectron spectroscopy. Appl. Surf. Sci., 2015, 324, 837–841.
   Google Scholar
• K. Valleti, S. G. Rao, P. Miryalkar, A. Sandeep and D. S. Rao: Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications. Sol. Ener. Mater. Sol. Cells., 2020, 215, 110634.
   Google Scholar
• P. Dzienny, B. Stępak, A. Budnicki and A. Antonczak: The influence of laser pulse duration on periodic surfaces on stainless steel. J Laser. Micro/Nanoeng., 2020, 15(1), 12–15.
   Google Scholar
• V. Racine, M. L. Barh, G. Killaire and A. Weck: Effect of polarization on ripple formation in deep femtosecond laser machined cavities. J. Mater. Process. Technol., 2019, 271, 162–171.
   Google Scholar
• C. Wu, X. Fang, F. Liu, X. Guo, R. Maeda and Z. Jiang: High speed and low roughness micromachining of silicon carbide by plasma etching aided femtosecond laser processing. Ceram. Int., 2020, 46((11) Part A), 17896–17902.
   Google Scholar
• E. Stankevičius, K. Vilkevičius, M. Gedvilas, E. Bužavaitė-Vertelienė, A. Selskis and Z. Balevičius: Direct laser writing for the formation of large-scale gold microbumps arrays generating hybrid lattice plasmon polaritons in Vis–NIR range. Adv. Opt. Mater., 2021, 9(12), 2170044.
   Google Scholar
• C.D. Wagner, W.M. Riggs, L.E. Davis, J.F. Moulder and G.E. Muilenberg: Handbook of X-ray photoelectron spectroscopy, Minneapolis, MN, Perkin –Elmer, 1978, p.190.
   Google Scholar
• W. Ernst, J. Neidhardt, H. Willmann, B. Sartory, P. H. Mayrhofer and C. Mitterer: Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering. Thin. Solid Films, 2008, 517, 568–574.
   Google Scholar
• J. W. Du, L. Chen, J. Chen and C. Hu: Influence of oxygen addition on the structure, mechanical and thermal properties of CrN coating. Surf. Coat. Technol., 2021, 411, 126992.
   Google Scholar
• H. Wang, H. Lin, C. Wang, L. Zheng and X. Hu: Laser drilling of structural ceramics—A review. J. Eur. Ceram. Soc., 2017, 37, 1157–1173.
   Google Scholar
• Z. Li, B.-Q. Li, P. Bai, B. Liu and Y. Wang: Research on the Thermal Behaviour of a Selectively Laser Melted Aluminium Alloy: Simulation and Experiment. Materials (Basel), 2018, 11, 1172.
   Google Scholar
• B. K. Nayak and M. C. Gupta: Ultrafast laser-induced self-organized conical micro/nano surface structures and their origin. Opt. Lasers Eng., 2010, 48(10), 966–973.
   Web of Science ®Google Scholar
• J. Yang, F. Luo, T. Kao, X. Li, G. W. Ho, J. Teng, X. Luo and M. Hong: Design and fabrication of broadband ultralow reflectivity black Si surfaces by laser micro/nanoprocessing. Light Sci. Appl, 2014, 3, e185.
   Web of Science ®Google Scholar
• A. Papadopoulos, E. Skoulas, A. Mimidis, G. Perrakis, G. Kenanakis, G. D. Tsibidis and E. Stratakis: Biomimetic Omnidirectional Antireflective Glass via Direct Ultrafast Laser Nanostructuring. Adv. Mater., 2019, 31, 1901123.
   Google Scholar
• R. Weil: Origins of stress in electrodeposits: Review of the literature dealing with stress in electrodeposited metals. Part I, Plating, 1970, 57, 1231–1237.
   Google Scholar
• R. Weil: Origins of stress in electrodeposits. Review of the literature dealing with stress in electrodeposited metals. Part III, Plating, 1971, 58, 137–146.
   Google Scholar
• J. Preußner, S. Oeser, W. Pfeiffer, A. Temmler and E. Willenborg: Microstructure and residual stresses of laser structured surfaces. Adv. Mater. Res., 2014, 996, 568–573.
   Google Scholar