Model predictive torque control with an extended prediction horizon for electrical drive systems

References

• Alireza Davari, S., Khaburi, D.A., Wang, F., & Kennel, R.M. (2012). Using full order and reduced order observers for robust sensorless predictive torque control of induction motors. IEEE Transactions on Power Electronics, 27, 3424–3433.
   Web of Science ®Google Scholar
• Ambrozic, V., Buja, G.S., & Menis, R. (2004). Band-constrained technique for direct torque control of induction motor. IEEE Transactions on Industrial Electronics, 51, 776–784.
   Web of Science ®Google Scholar
• Cortes, P., Kazmierkowski, M.P., Kennel, R.M., Quevedo, D.E., & Rodriguez, J. (2008). Predictive control in power electronics and drives. IEEE Transactions on Industrial Electronics, 55, 4312–4324.
   Web of Science ®Google Scholar
• Davari, S.A., Khaburi, D.A., & Kennel, R. (2012). Using a weighting factor table for FCS-MPC of induction motors with extended prediction horizon. In 38th Annual Conference of IEEE Industrial Electronics. Montreal, QC: IEEE.
   Google Scholar
• Fuentes, E.J., Silva, C.A., & Yuz, J.I. (2012). Predictive speed control of a two-mass system driven by a permanent magnet synchronous motor. IEEE Transactions on Industrial Electronics, 59, 2840–2848.
   Web of Science ®Google Scholar
• Geyer, T. (2011). Computationally efficient model predictive direct torque control. IEEE Transactions on Power Electronics, 26, 2804–2816.
   Web of Science ®Google Scholar
• Geyer, T., Papafotiou, G., & Morari, M. (2009). Model predictive direct torque control. Part I: Concept, algorithm, and analysis. IEEE Transactions on Industrial Electronics, 56, 1894–1905.
   Web of Science ®Google Scholar
• Habetler, T.G., Profumo, F., Pastorelli, M., & Tolbert, L.M. (1991). Direct torque control of induction machines using space vector modulation. In IEEE Industry Applications Society Annual Meeting. Dearborn, MI: IEEE.
   Google Scholar
• Holtz, J. (1994). The dynamic representation of AC drive systems by complex signal flow graphs. In IEEE International Symposium on Industrial Electronics. Santiago: IEEE.
   Google Scholar
• Kazmierkowski, M.P., Franquelo, L.G., Rodriguez, J., Perez, M.A., & Leon, J.I. (2011). High-performance motor drives. IEEE Industrial Electronics Magazine, 5, 6–26.
   Web of Science ®Google Scholar
• Kennel, R., Linder, A., & Linke, M. (2001). Generalized predictive control (GPC) – ready for use in drive applications? In IEEE 32nd Annual Power Electronics Specialists Conference. Vancouver, BC: IEEE.
   Google Scholar
• Kyo-Beum, L., Blaabjerg, F., & Tae-Woong, Y. (2007). Speed-sensorless DTC-SVM for matrix converter drives with simple nonlinearity compensation. IEEE Transactions on Industry Applications, 43, 1639–1649.
   Web of Science ®Google Scholar
• Lascu, C., Boldea, I., & Blaabjerg, F. (2004). Variable-structure direct torque control – A class of fast and robust controllers for induction machine drives. IEEE Transactions on Industrial Electronics, 51, 785–792.
   Web of Science ®Google Scholar
• Mariethoz, S., & Morari, M. (2009). Explicit model-predictive control of a PWM inverter with an LCL filter. IEEE Transactions on Industrial Electronics, 56, 389–399.
   Web of Science ®Google Scholar
• Morari, M., & Lee, J.H. (1999). Model predictive control: Past, present and future. Computers & Chemical Engineering, 23, 667–682.
   Web of Science ®Google Scholar
• Mutschler, P., & Flach, E. (1998). Digital implementation of predictive direct control algorithms for induction motors. In 33rd IAS Annual Meeting on IEEE Industry Applications Conference. St. Louis, MO: IEEE.
   Google Scholar
• Naouar, M.W., Ammar Naassani, A., Monmasson, E., & Slama Belkhodja, I. (2008). FPGA-based predictive current controller for synchronous machine speed drive. IEEE Transactions on Power Electronics, 23, 2115–2126.
   Web of Science ®Google Scholar
• Nemec, M., Nedeljkovic, D., & Ambrozic, V. (2007). Predictive torque control of induction machines using immediate flux control. IEEE Transactions on Industrial Electronics, 54, 2009–2017.
   Web of Science ®Google Scholar
• Pacas, M., & Weber, J. (2005). Predictive direct torque control for the PM synchronous machine. IEEE Transactions on Industrial Electronics, 52, 1350–1356.
   Web of Science ®Google Scholar
• Perez, M., Vasquez, M., Rodriguez, J., & Pontt, J. (2009). FPGA-based predictive current control of a three-phase active front end rectifier. In IEEE International Conference on Industrial Technology. Gippsland: IEEE.
   Google Scholar
• Preindl, M., & Bolognani, S. (2013). Model predictive direct speed control with finite control set of PMSM drive systems. IEEE Transactions on Power Electronics, 28, 1007–1015.
   Web of Science ®Google Scholar
• Preindl, M., & Bolognani, S. (2013). Model predictive direct torque control with finite control set for PMSM drive systems, part 1: Maximum torque per ampere operation. IEEE Transactions on Industrial Informatics, 9, 1912–1921.
   Web of Science ®Google Scholar
• Preindl, M., & Schaltz, E. (2011). Sensorless model predictive direct current control using novel second-order PLL observer for PMSM drive systems. IEEE Transactions on Industrial Electronics, 58, 4087–4095.
   Web of Science ®Google Scholar
• Preindl, M., Schaltz, E., & Thogersen, P. (2011). Switching frequency reduction using model predictive direct current control for high-power voltage source inverters. IEEE Transactions on Industrial Electronics, 58, 2826–2835.
   Web of Science ®Google Scholar
• Rodriguez, J., Kennel, R.M., Espinoza, J.R., Trincado, M., Silva, C.A., & Rojas, C.A. (2012). High-performance control strategies for electrical drives: An experimental assessment. IEEE Transactions on Industrial Electronics, 59, 812–820.
   Web of Science ®Google Scholar
• Rodriguez, J., Pontt, J., Silva, C., Cortés, P., Ammann, U., & Rees, S. (2004, September). Predictive direct torque control of an induction machine. Proceedings of the IEEE 11th International Power Electronics Motion Control Conference. Riga: IEEE.
   Google Scholar
• Rodriguez, J., Pontt, J., Silva, C.A., Correa, P., Lezana, P., Cortes, P., & Ammann, U. (2007). Predictive current control of a voltage source inverter. IEEE Transactions on Industrial Electronics, 54, 495–503.
   Web of Science ®Google Scholar
• Stolze, P., Tomlinson, M., Kennel, R., & Mouton, T. (2013). Heuristic finite-set model predictive current control for induction machines. In Energy Conversion Congress and Exposition Asia Downunder. Melbourne: IEEE.
   Google Scholar
• Takahashi, I., & Noguchi, T. (1986). A new quick-response and high-efficiency control strategy of an induction motor. IEEE Transactions on Industry Applications, 5, 820–827.
   Web of Science ®Google Scholar
• Takahashi, I., & Ohmori, Y. (1989). High-performance direct torque control of an induction motor. IEEE Transactions on Industry Applications, 25, 257–264.
   Web of Science ®Google Scholar
• Vasic, V., Vukosavic, S.N., & Levi, E. (2003). A stator resistance estimation scheme for speed sensorless rotor flux oriented induction motor drives. IEEE Transactions on Energy Conversion, 18, 476–483.
   Web of Science ®Google Scholar
• Wang, F., Chen, Z., Stolze, P., Stumper, J.-F., Rodriguez, J., & Kennel, R. (2014). Encoderless finite-state predictive torque control for induction machine with a compensated MRAS. IEEE Transactions on Industrial Informatics, 10, 1097–1106.
   Web of Science ®Google Scholar
• Wang, F., Stolze, P., Kennel, R., Davari, S.A., & Khaburi, D.A. (2012). Speed-independent FCS-model predictive torque control for IM based on SMO. In 15th International Power Electronics and Motion Control Conference (EPE/PEMC). Novi Sad: IEEE.
   Google Scholar
• Yang, J., Li, S., Chen, X., & Li, Q. (2011). Disturbance rejection of the dead-time processes using disturbance observer and model predictive control. Chemical Engineering Research and Design, 89, 125–135.
   Web of Science ®Google Scholar