Sensorless position estimation and control of permanent-magnet synchronous motors using a saturation model

References

• Aihara, T., Toba, A., Yanase, T., Mashimo, A., & Endo, K. (1999). Sensorless torque control of salient-pole synchronous motor at zero-speed operation. IEEE Transactions on Power Electronics, 14, 202–208.
   Web of Science ®Google Scholar
• Bianchi, N., Bolognani, S., & Faggion, A. (2009). Predicted and measured errors in estimating rotor position by signal injection for salient-pole PM synchronous motors. In Proceedings of the IEEE International Electric Machines and Drives Conference (pp. 1565–1572). doi:10.1109/IEMDC.2009.5075412
   Google Scholar
• Bianchi, N., Fornasiero, E., & Bolognani, S. (2011). Effect of stator and rotor saturation on sensorless rotor position detection. In Proceedings of the IEEE Energy Conversion Congress and Exposition (pp. 1528–1535). doi:10.1109/ECCE.2011.6063963
   Google Scholar
• Bolognani, S., Calligaro, S., Petrella, R., & Tursini, M. (2011). Sensorless control of IPM motors in the low-speed range and at standstill by HF injection and DFT processing. IEEE Transactions on Industry Applications, 47(1), 96–104.
   Web of Science ®Google Scholar
• Consoli, A., Scarcella, G., & Testa, A. (2001). Industry application of zero-speed sensorless control techniques for PM synchronous motors. IEEE Transactions on Industry Applications, 37(2), 513–521.
   Web of Science ®Google Scholar
• Corley, M., & Lorenz, R. (1998). Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds. IEEE Transactions on Industry Applications, 34, 784–789.
   Web of Science ®Google Scholar
• De Belie, F.M.L.L., Melkebeek, J.A.A., Vandevelde, L., Boel, R.K., Geldhof, K.R., & Vyncke, T.J. (2005). A nonlinear model for synchronous machines to describe high-frequency signal based position estimators. In Proceedings of the IEEE International Conference on Electric Machines and Drives (pp. 696–703). doi:10.1109/iemdc.2005.195799
   Google Scholar
• De Kock, H., Kamper, M., & Kennel, R. (2009). Anisotropy comparison of reluctance and PM synchronous machines for position sensorless control using HF carrier injection. IEEE Transactions on Power Electronics, 24(8), 1905–1913.
   Web of Science ®Google Scholar
• Delpoux, R., & Floquet, T. (2014). High-order sliding mode control for sensorless trajectory tracking of a PMSM. International Journal of Control, 87(10), 2140–2155.
   Web of Science ®Google Scholar
• Ezzat, M., de Leon, J., & Glumineau, A. (2011). Sensorless speed control of PMSM via adaptive interconnected observer. International Journal of Control, 84(11), 1926–1943.
   Web of Science ®Google Scholar
• Guglielmi, P., Pastorelli, M., & Vagati, A. (2006). Cross-saturation effects in IPM motors and related impact on sensorless control. IEEE Transactions on Industry Applications, 42, 1516–1522.
   Web of Science ®Google Scholar
• Ha, J.-I., Ide, K., Sawa, T., & Sul, S.-K. (2003). Sensorless rotor position estimation of an interior permanent-magnet motor from initial states. IEEE Transactions on Industry Applications, 39(3), 761–767.
   Web of Science ®Google Scholar
• Holtz, J. (2008). Acquisition of position error and magnet polarity for sensorless control of PM synchronous machines. IEEE Transactions on Industry Applications, 44(4), 1172–1180.
   Web of Science ®Google Scholar
• Jang, J.-H., Ha, J.-I., Ohto, M., Ide, K., & Sul, S.K. (2004). Analysis of permanent-magnet machine for sensorless control based on high-frequency signal injection. IEEE Transactions on Industry Applications, 40(6), 1595–1604.
   Web of Science ®Google Scholar
• Jansen, P., & Lorenz, R. (1995). Transducerless position and velocity estimation in induction and salient AC machines. IEEE Transactions on Industry Applications, 31, 240–247.
   Web of Science ®Google Scholar
• Jebai, A.K., Combes, P., Malrait, F., Martin, P., & Rouchon, P. (2014). Energy-based modeling of electric motors. In Proceedings of the IEEE Conference on Decision and Control (pp. 6009–6016). doi:10.1109/CDC.2014.7040330
   Google Scholar
• Jebai, A.K., Malrait, F., Martin, P., & Rouchon, P. (2011). Estimation of saturation of permanent-magnet synchronous motors through an energy-based model. In Proceedings of the IEEE International Electric Machines and Drives Conference (pp. 1316–1321). doi:10.1109/IEMDC.2011.5994795
   Google Scholar
• Jebai, A.K., Malrait, F., Martin, P., & Rouchon, P. (2012a). Sensorless position estimation of permanent-magnet synchronous motors using a nonlinear magnetic saturation model. In Proceedings of the International Conference on Electrical Machines, ICEM 2012 (pp. 2245–2251). doi:10.1109/ICElMach.2012.6350194
   Google Scholar
• Jebai, A.K., Malrait, F., Martin, P., & Rouchon, P. (2012b). Signal injection and averaging for position estimation of permanent-magnet synchronous motors. In Proceedings of the IEEE Conference on Decision and Control (pp. 7608–7613). doi:10.1109/CDC.2012.6426887
   Google Scholar
• Li, Y., Zhu, Z., Howe, D., Bingham, C., & Stone, D. (2009). Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. IEEE Transactions on Industry Applications, 45, 1843–1850.
   Web of Science ®Google Scholar
• Liu, J., & Zhu, Z. (2014a). Novel sensorless control strategy with injection of high-frequency pulsating carrier signal into stationary reference frame. IEEE Transactions on Industry Applications, 50(4), 2574–2583.
   Web of Science ®Google Scholar
• Liu, J., & Zhu, Z. (2014b). Sensorless control strategy by square-waveform high-frequency pulsating signal injection into stationary reference frame. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2(2), 171–180.
   Web of Science ®Google Scholar
• Mossaheb, S. (1983). Application of a method of averaging to the study of dithers in non-linear systems. International Journal of Control, 38(3), 557–576.
   Web of Science ®Google Scholar
• Ogasawara, S., & Akagi, H. (1998). An approach to real-time position estimation at zero and low speed for a PM motor based on saliency. IEEE Transactions on Industry Applications, 34, 163–168.
   Web of Science ®Google Scholar
• Raca, D., García, P., Reigosa, D., Briz, F., & Lorenz, R. (2010). Carrier-signal selection for sensorless control of PM synchronous machines at zero and very low speeds. IEEE Transactions on Industry Applications, 46(1), 167–178.
   Web of Science ®Google Scholar
• Reigosa, D., García, P., Raca, D., Briz, F., & Lorenz, R. (2008). Measurement and adaptive decoupling of cross-saturation effects and secondary saliencies in sensorless controlled IPM synchronous machines. IEEE Transactions on Industry Applications, 44(6), 1758–1767.
   Web of Science ®Google Scholar
• Robeischl, E., & Schroedl, M. (2004). Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion. IEEE Transactions on Industry Applications, 40(2), 591–598.
   Web of Science ®Google Scholar
• Sanders, J.A., Verhulst, F., & Murdock, J. (2007). Averaging methods in nonlinear dynamical systems (2nd ed.) ( No. 59). New York, NY: Springer.
   Google Scholar
• Sergeant, P., De Belie, F., & Melkebeek, J. (2009). Effect of rotor geometry and magnetic saturation in sensorless control of PM synchronous machines. IEEE Transactions on Magnetics, 45(3), 1756–1759.
   Web of Science ®Google Scholar
• Sergeant, P., De Belie, F., & Melkebeek, J. (2012). Rotor geometry design of interior PMSMs with and without flux barriers for more accurate sensorless control. IEEE Transactions on Industrial Electronics, 59(6), 2457–2465.
   Web of Science ®Google Scholar
• Shinnaka, S. (2008). A new speed-varying ellipse voltage injection method for sensorless drive of permanent-magnet synchronous motors with pole saliency - New PLL method using high-frequency current component multiplied signal. IEEE Transactions on Industry Applications, 44(3), 777–788.
   Web of Science ®Google Scholar
• Štumberger, B., Štumberger, G., Dolinar, D., Hamler, A., & Trlep, M. (2003). Evaluation of saturation and cross-magnetization effects in interior permanent-magnet synchronous motor. IEEE Transactions on Industry Applications, 39(5), 1264–1271.
   Web of Science ®Google Scholar
• Štumberger, G., Polajzer, B., Štumberger, B., Toman, M., & Dolinar, D. (2005). Evaluation of experimental methods for determining the magnetically nonlinear characteristics of electromagnetic devices. IEEE Transactions on Magnetics, 41(10), 4030–4032.
   Web of Science ®Google Scholar
• Szalai, T., Berger, G., & Petzoldt, J. (2014). Stabilizing sensorless control down to zero speed by using the high-frequency current amplitude. IEEE Transactions on Power Electronics, 29(7), 3646–3656.
   Web of Science ®Google Scholar
• Vagati, A., Pastorelli, M., & Scapino, F. (2000). Impact of cross saturation in synchronous reluctance motors of the transverse-laminated type. IEEE Transactions on Industry Applications, 36(4), 1039–1046.
   Web of Science ®Google Scholar
• Wang, X., Xie, W., Dajaku, G., Kennel, R., Gerling, D., & Lorenz, R. (2014). Position self-sensing evaluation of novel CW-IPMSMs with an HF injection method. IEEE Transactions on Industry Applications, 50(5), 3325–3334.
   Web of Science ®Google Scholar
• Yoon, Y.-D., Sul, S.-K., Morimoto, S., & Ide, K. (2011). High-bandwidth sensorless algorithm for AC machines based on square-wave-type voltage injection. IEEE Transactions on Industry Applications, 47(3), 1361–1370.
   Web of Science ®Google Scholar
• Zhu, Z., & Gong, L. (2011). Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods. IEEE Transactions on Industrial Electronics, 58(8), 3431–3439.
   Web of Science ®Google Scholar