References
- Abbasi, S., Nourinia, J., Ghobadi, C., Karamirad, M., Mohammadi, B., et. al. (2018). A sub-wavelength polarization sensitive band-stop FSS with wide angular response for X- and Ku-bands. AEU - International Journal of Electronics and Communications, 89, 85–91.
- Bagci, F., Mulazimoglu, C., Can, S., Karakaya, E., Yilmaz, A. E., & Akaoglu, B. (2017). A glass-based dual-band frequency selective surface for protecting systems against WLAN signals. AEU - International Journal of Electronics and Communications, 82, 426–434.
- Behdad, N. A. (2008). Second-order band-pass frequency selective surface using nonresonant subwavelength periodic structures. Microwave and Optical Technology Letters, 50, 1639–1643.
- Caroglanian, A, Grounds, P. W, & Webb, K. J. (2012). Finite and infinite frequency selective surfaces: experiments and models. Journal Of Electromagnetic Waves and Applications, 3, 409–419. doi:10.1163/156939389X00133
- Clarissa, D. L. N., Ribeiro da Silva, M., da Fonseca Silva, P. H., & D’Assunção, A. G. (2014). Analysis and design of frequency selective surface using teragon patch elements for WLAN applications. Journal of Electromagnetic Waves and Applications, 28, 1282–1292.
- Costa, F., Monorchio, A., & Manara, G. (2010). Analysis and design of ultra-thin electromagnetic absorbers comprising resistively loaded high impedance surfaces. IEEE Transactions on Antennas and Wave Propagation, 58, 1551–1558.
- Gao, M., Momeni Hasan Abadi, S. M. A., & Behdad, N. A. (2016). Dual-band, inductively coupled miniaturized-element frequency selective surface with higher-order bandpass response. IEEE Transactions on Antennas and Wave Propagation, 64, 3729–3734.
- Gao, M., Momeni Hasan Abadi, S. M. A., & Behdad, N. A. (2017). Hybrid miniaturized-element frequency selective surface with a third-order bandpass response. IEEE Antennas and Wireless Propagation Letters, 16, 708–711.
- Hussein, M., Zhou, J., Huang, Y., & Al-Juboori, B. (2017). A low-profile miniaturized second-order bandpass frequency selective surface. IEEE Antennas Wireless Propagation Letters, 16, 2791–2794.
- Krushna Kanth, V., & Raghavan, S. (2018a). Design and implementation of ultra-thin wideband fss with sharp sidebands using tripole slots. IEEE Indian Conference on Antennas and Propagation (InCAP) (pp. 1–4). Hyderabad, India.
- Krushna Kanth, V., & Raghavan, S. (2018b). A novel faraday-cage inspired FSS shield for stable resonance performance characteristics. International Journal of Electronics Letters, 1–10.
- Krushna Kanth, V., & Raghavan, S. (2019). EM design and analysis of frequency selective surface based on substrate-integrated waveguide technology for airborne radome application. IEEE Transactions on Microwave Theory and Techniques, 67, 1727–1739.
- Li, D., Li, T.-W., Hao, R., Chen, H.-S., Yin, W.-Y., Yu, H.-C., & Li, E.-P. (2017). A low-profile broadband bandpass frequency selective surface with two rapid band edges for 5G near-field applications. IEEE Transactions on Electromagnetic Compatibility, 59, 670–676.
- Li, D., Xie, Y. J., Wang, P., & Yang, R. (2007). Applications of split-ring resonances on multi-band frequency selective surfaces. Journal of Electromagnetic Waves and Applications, 21, 1551–1563.
- Li, M., & Behdad, N. (2013). Frequency selective surfaces for pulsed high-power microwave applications. IEEE Transactions on Antennas and Wave Propagation, 61, 677–687.
- Majidzadeh, M., Ghobadi, C., & Nourinia, C. (2016). Novel single layer reconfigurable frequency selective surface with UWB and multi-band modes of operation. AEU - International Journal of Electronics and Communications, 70(2), 151–161.
- Mittra, R. (2004). A look at some challenging problems in computational electromagnetics. IEEE Antennas and Propagation Magazine, 46, 18–32.
- Munk, B. A. (2000). Frequency selective surfaces theory and design. Hoboken, NJ, USA: John Wiley & Sons.
- Narayan, S., Sangeetha, B., Sruthi, T. V., Shambulingappa, V., & Nair, R. U. (2017). Design of low observable antenna using active hybrid-element FSS structure for stealth applications. AEU - International Journal of Electronics and Communications, 80, 137–143.
- Ohta, H. (1982). Circuit representation of tripole element array for frequency selective surfaces. Antennas and Propag. Society International Symposium (pp. 455–458). Albuquerque, NM, USA.
- Qi, N. N., Gong, S. X., Zhang, Y. J., & Liu, J. F. (2008). Reducing bandwidth of FSS using substrate-integrated waveguide technology. Journal of Electromagnetic Waves and Applications, 22, 2087–2096.
- Ravi, P., & Lee, J. R. (2017). Progress in frequency selective surface-based smart electromagnetic structures: A critical review. Aerospace Science and Technology, 66, 216–234.
- Swat, V., & Ashok, M. (2015). High gain planar resonant cavity antennas based on metamaterial and frequency selective surfaces. AEU - International Journal of Electronics and Communications, 69(9), 1387–1392.
- Wang, H. B., & Cheng, Y. J. (2016). Frequency selective surface with miniaturized elements based on quarter-mode substrate integrated waveguide cavity with two poles. IEEE Transactions on Antennas and Wave Propagation, 64, 914–922.
- Yan, M., Qu, S., Wang, J., Zhang, A., Zheng, L., Pang, Y., & Zhou, H. (2015). A miniaturized dual-band FSS with second-order response and large band separation. IEEE Antennas and Wireless Propagation Letters, 14, 1602–1605.
- Yu, F., Wang, J., Wang, J., Ma, H., Du, H., Xu, Z., & Qu, S. (2016). Polarization and angle insensitive dual-band bandpass frequency selective surface using all-dielectric metamaterials. Journal of Applied Physics, 119, 134104–134110.
- Yu, X. W., Zhao, M. Y., He, Y., Miao, L., & Jiang, J. J. (2015). Switchable frequency selective surfaces absorber/reflector for wideband applications. Journal of Electromagnetic Waves and Applications, 29, 1473–1485.
- Zhou, Q., Liu, P., Wang, K., Liu, H., & Yu, D. (2018). Absorptive frequency selective surface with switchable passband. AEU - International Journal of Electronics and Communications, 89, 160–166.