References
- Abd-El-Malek, M., Abdelsalam, A. K., & Hassan, O. E. (2017). Induction motor broken rotor bar fault location detection through envelope analysis of start-up current using hilbert transform. Mechanical Systems and Signal Processing, 93, 332–350. https://doi.org/10.1016/j.ymssp.2017.02.014
- Ameid, T., Menacer, A., Talhaoui, H., & Azzoug, Y. (2018). Discrete wavelet transform and energy eigenvalue for rotor bars fault detection in variable speed field-oriented control of induction motor drive. ISA Transactions, 79, 217–231. https://doi.org/10.1016/j.isatra.2018.04.019
- Bessam, B., Menacer, A., Boumehraz, M., & Cherif, H. (2016). Detection of broken rotor bar faults in induction motor at low load using neural network. ISA Transactions, 64, 241–246. https://doi.org/10.1016/j.isatra.2016.06.004
- Bindal, R. K., & Kaur, I. (2020). Torque ripple reduction of induction motor using dynamic fuzzy prediction direct torque control. ISA Transactions, 99, 322–338. https://doi.org/10.1016/j.isatra.2019.09.012
- Choudhary, A., Goyal, D., Shimi, S. L., & Akula, A. (2018). Condition monitoring and fault diagnosis of induction motors: A review. Archives of Computational Methods in Engineering, 26(4), 1221–1238. https://doi.org/10.1007/s11831-018-9286-z
- Chuan, H., & Gan, L. (2020). Investigation of the power losses in induction machines with rotor eccentricity. Electrical Engineering, 102(3), 1393–1403. https://doi.org/10.1007/s00202-020-00957-0
- Danilo, G. G., Aguilar, W. G., Arcos-Aviles, D., & Sotomayor, D. (2017). Broken bar diagnosis for squirrel cage induction motors using frequency analysis based on MCSA and continuous wavelet transform. Mathematical and Computational Applications, 22(2), 30. https://doi.org/10.3390/mca22020030
- Fu, Q., Yue, S., He, B., & Fu, N. (2019). Multiple coupled circuit modeling approach for squirrel cage induction machine under single-broken-bar fault with stator winding functions decomposed in d–q rotor reference frame. IET Electric Power Applications, 13(7), 889–900. https://doi.org/10.1049/iet-epa.2018.5397
- Goktas, T., & Arkan, M. (2016). Discerning broken rotor bar failure from low-frequency load torque oscillation in DTC induction motor drives. Transactions of the Institute of Measurement and Control, 40(1), 279–286. https://doi.org/10.1177/0142331216654964
- Goktas, T., Arkan, M., & Ozguven, O. F. (2013). A new method to separate broken rotor failures and low frequency load oscillations in a three-phase induction motor. 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED) (pp. 122–127). https://doi.org/10.1109/demped.2013.6645706
- Gupta, Y. B. S. S., & Rao, S. S. (2019). Experimental evaluation of direct torque-controlled 3-phase induction motor under inverter faults. International Journal of Electronics, 107(5), 719–739. https://doi.org/10.1080/00207217.2019.1672809
- Harzelli, I., Menacer, A., & Ameid, T. (2019). A fault monitoring approach using model-based and neural network techniques applied to input–output feedback linearization control induction motor. Journal of Ambient Intelligence and Humanized Computing, 11(6), 2519–2538. https://doi.org/10.1007/s12652-019-01307-0
- Hassan, O. E., Amer, M., Abdelsalam, A. K., & Williams, B. W. (2018). Induction motor broken rotor bar fault detection techniques based on fault signature analysis – A review. IET Electric Power Applications, 12(7), 895–907. https://doi.org/10.1049/iet-epa.2018.0054
- Hemamalini, P.. (2019). Rational-dilation wavelet transform based torque estimation from acoustic signals for fault diagnosis in a three-phase induction motor. IEEE Transactions on Industrial Informatics, 15(6), 3492–3501. https://doi.org/10.1109/tii.2018.2874463
- Ibrahim, S. O., Faris, K. N., & Elzahab, E. A. (2015). Implementation of fuzzy modeling system for faults detection and diagnosis in three phase induction motor drive system. Journal of Electrical Systems and Information Technology, 2(1), 27–46. https://doi.org/10.1016/j.jesit.2015.03.004
- Imoru, O., Bhaskar, M. A., Jimoh, A. A.-G., & Hamam, Y. (2017). Diagnosis of stator shorted-turn faults in induction machines using discrete wavelet transform. African Journal of Science, Technology, Innovation and Development, 9(3), 349–355. https://doi.org/10.1080/20421338.2017.1327933
- Jannati, M., Monadi, A., Idris, N. R. N., & Aziz, M. J. A. (2017). Experimental evaluation of FOC of 3-phase IM under open-phase fault. International Journal of Electronics, 104(10), 1675–1688. https://doi.org/10.1080/00207217.2017.1321144
- Kapoor, S. R., Khandelwal, N., & Pareek, P. (2014). Bearing fault analysis by signal energy calculation based signal processing technique in squirrel cage induction motor. 2014 International Conference on Signal Propagation and Computer Technology (ICSPCT 2014) (pp. 33–38). https://doi.org/10.1109/icspct.2014.6884922
- Kechida, R., Menacer, A., & Benakcha, A. (2010). Fault detection of broken rotor bars using stator current spectrum for the direct torque control induction motor. World Academy of Science, Engineering and Technology, 4(6), 1244–1249. https://doi.org/10.5281/zenodo.1063050
- Kechida, R., Menacer, A., & Talhaoui, H. (2013). Approach signal for rotor fault detection in induction motors. Journal of Failure Analysis and Prevention, 13(3), 346–352. https://doi.org/10.1007/s11668-013-9681-6
- Liboni, L. H., Flauzino, R. A., Silva, I. N. D., & Costa, E. C. M. (2019). Efficient feature extraction technique for diagnosing broken bars in three-phase induction machines. Measurement, 134, 825–834. https://doi.org/10.1016/j.measurement.2018.12.005
- Liu, Y., Stettenbenz, M., & Bazzi, A. M. (2019). Smooth fault-tolerant control of induction motor drives with sensor failures. IEEE Transactions on Power Electronics, 34(4), 3544–3552. https://doi.org/doi:10.1109/tpel.2018.2848964
- Mark, A. P., Irudayaraj, G. C. R., Vairamani, R., & Mylsamy, K. (2014). Dynamic performance analysis for different vector-controlled CSI- fed induction motor drives. Journal of Power Electronics, 14(5), 989–999. https://doi.org/10.6113/JPE.2014.14.5.989
- Matic, D., Kanovic, Z., Reljic, D., Kulic, F., Oros, D., & Vasic, V. (2013). Broken bar detection using current analysis — A case study. 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED) (pp. 407–411). https://doi.org/10.1109/demped.2013.6645748
- Ojaghi, M., Sabouri, M., & Faiz, J. (2018). Performance analysis of squirrel-cage induction motors under broken rotor bar and stator inter-turn fault conditions using analytical modeling. IEEE Transactions on Magnetics, 54(11), 1–5. https://doi.org/10.1109/tmag.2018.2842240
- Rivera-Guillen, J. R., Santiago-Perez, J. D., Amezquita-Sanchez, J. P., Valtierra-Rodriguez, M., & Romero-Troncoso, R. J. (2018). Enhanced FFT-based method for incipient broken rotor bar detection in induction motors during the start-up transient. Measurement, 124, 277–285. https://doi.org/10.1016/j.measurement.2018.04.039
- Saad, B., & Goléa, A. (2017). Direct field-oriented control using fuzzy logic type-2 for induction motor with broken rotor bars. Advances in Modelling & Analysis C, 72(4), 203–212. https://doi.org/10.18280/ama_c.720401
- Shi, P., Chen, Z., Vagapov, Y., Davydova, A., & Lupin, S. (2014). Broken bar fault diagnosis for induction machines under load variation condition using discrete wavelet transform. Proceedings of IEEE East-West Design & Test Symposium (EWDTS 2014) (pp. 1–4). https://doi.org/10.1109/ewdts.2014.7027059
- Soleimani, Y., Cruz, S. M. A., & Haghjoo, F. (2019). Broken rotor bar detection in induction motors based on air-gap rotational magnetic field measurement. IEEE Transactions on Instrumentation and Measurement, 68(8), 2916–2925. https://doi.org/10.1109/TIM.2018.2870265
- Subrata, C., Surajit, M., & Madhuchhanda, K. (2016). Induction motor fault diagnosis: Approach through current signature analysis. SPRINGER.
- Sudheer, H., Kodad, S., & Sarvesh, B. (2018). Improvements in direct torque control of induction motor for wide range of speed operation using fuzzy logic. Journal of Electrical Systems and Information Technology, 5(3), 813–828. https://doi.org/10.1016/j.jesit.2016.12.015
- Sun, X., Diao, K., Yang, Z., Lei, G., Guo, Y., & Zhu, J. (2019). Direct torque control based on a fast modeling method for a segmented-rotor switched reluctance motor in HEV application. IEEE Journal of Emerging and Selected Topics in Power Electronics, 1. https://doi.org/10.1109/JESTPE.2019.2950085
- Sun, X., Wu, J., Lei, G., Cai, Y., Chen, X., & Guo, Y. (2020). Torque modeling of a segmented-rotor SRM using maximum-correntropy-criterion-based lssvr for torque calculation of EVs. IEEE Journal of Emerging and Selected Topics in Power Electronics, 1. https://doi.org/10.1109/jestpe.2020.2977957
- Talhaoui, H., Menacer, A., Kessal, A., & Tarek, A. (2018). Experimental diagnosis of broken rotor bars fault in an induction machine based on hilbert and discrete wavelet transforms. The International Journal of Advanced Manufacturing Technology, 95(1–4), 1399–1408. https://doi.org/10.1007/s00170-017-1309-7
- Tanwar, P., & Somkuwar, A. (2018). Hard component detection of transient noise and its removal using empirical mode decomposition and wavelet-based predictive filter. IET Signal Processing, 12(7), 907–916. https://doi.org/10.1049/iet-spr.2017.0167
- Wiam, A., & Ali, H. (2019). Direct torque control-based power factor control of a DFIG. Energy Procedia, 162, 296–305. https://doi.org/10.1016/j.egypro.2019.04.031
- Yassa, N., Rachek, M., & Houassine, H. (2019). Motor current signature analysis for the air gap eccentricity detection in the squirrel cage induction machines. Energy Procedia, 162, 251–262. https://doi.org/10.1016/j.egypro.2019.04.027