References
- Abaci, A., & Yuce, E. (2017). Modified DVCC based quadrature oscillator and lossless grounded inductor simulator using grounded capacitor (s). AEU-International Journal of Electronics and Communications, 76, 86–96. https://doi.org/https://doi.org/10.1016/j.aeue.2017.03.023
- Ayten, U. E., Sagbas, M., & Sedef, H. (2010). Current mode leapfrog ladder filters using a new active block. AEU-International Journal of Electronics and Communications, 64(6), 503–511. https://doi.org/https://doi.org/10.1016/j.aeue.2009.03.012
- Bothra, M., Pandey, R., Pandey, N., & Paul, S. K. (2013). Operational trans-resistance amplifier based tunable wave active filter. Radioengineering, 22(1), 159–166. https://www.radioeng.cz/fulltexts/2013/13_01_0159_0166.pdf
- Brackett, P., & Sedra, A. (1976). Direct SFG simulation of LC ladder networks with applications to active filter design. IEEE Transactions on Circuits and Systems, 23(2), 61–67. https://doi.org/https://doi.org/10.1109/TCS.1976.1084177
- Bruton, L. (1969). Network transfer functions using the concept of frequency-dependent negative resistance. IEEE Transactions on Circuit Theory, 16(3), 406–408. https://doi.org/https://doi.org/10.1109/TCT.1969.1082989
- Cam, U., Cicekoglu, O., & Kuntman, H. (2001). Novel lossless floating immittance simulator employing only two FTFNs. Analog Integrated Circuits and Signal Processing, 29(3), 233–235. https://doi.org/https://doi.org/10.1023/A:1011221716078
- Chang, C. M., Soliman, A. M., & Swamy, M. N. S. (2007). Analytical synthesis of low-sensitivity high-order voltage-mode DDCC and FDCCII-grounded R and C all-pass filter structures. IEEE Transactions on Circuits and Systems I: Regular Papers, 54(7), 1430–1443. https://doi.org/https://doi.org/10.1109/TCSI.2007.900183
- Channumsin, O., Pukkalanun, T., & Tangsrirat, W. (2012). Voltage-mode universal filter with one input and five outputs using DDCCTAs and all-grounded passive components. Microelectronics Journal, 43(8), 555–561. https://doi.org/https://doi.org/10.1016/j.mejo.2012.05.002
- Chaturvedi, B., & Kumar, A. (2016). DXCCTA: A new active element. In IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), 1–6. Delhi, India. https://doi.org/https://doi.org/10.1109/ICPEICES.2016.7853338
- Constantinides, A. G., & Haritantis, G. (1975). Wave active filters. Electronics Letter, 11(12), 254–256. https://doi.org/https://doi.org/10.1049/el:19750192
- De Marcellis, A., Ferri, G., Guerrini, N. C., Scotti, G., Stornelli, V., & Trifiletti, A. (2009). A novel low-voltage low-power fully differential voltage and current gained CCII for floating impedance simulations. Microelectronics Journal, 40(1), 20–25. https://doi.org/https://doi.org/10.1016/j.mejo.2008.08.014
- Dimopoulos, H., & Constantinides, A. (1978). Linear transformation active filters. IEEE Transactions on Circuits and Systems, 25(10), 845–852. https://doi.org/https://doi.org/10.1109/TCS.1978.1084391
- Fettweis, A. (1986). Wave digital filters: Theory and practice. Proceedings of the IEEE, 74(2), 270–327. https://doi.org/https://doi.org/10.1109/PROC.1986.13458
- Hwang, Y. S., Liu, S. I., Wu, D. S., & Wu, Y. P. (1994). Table-based linear transformation filters using OTA-C techniques. Electronics Letters, 30(24), 2021–2022. https://doi.org/https://doi.org/10.1049/el:19941414
- Hwang, Y. S., Liu, S. I., Wu, D. S., & Wu, Y. P. (1995). Linear transformation all-pole filters based on current conveyors. International Journal of Electronics, 79(4), 439–445. https://doi.org/https://doi.org/10.1080/00207219508926282
- Keskin, A. U. (2005). Voltage-mode high-Q band-pass filters and oscillators employing single CDBA and minimum number of components. International Journal of Electronics, 92(8), 479–487. https://doi.org/https://doi.org/10.1080/00207210500168626
- Koomgaew, C., Petchmaneelumka, W., & Riewruja, V. (2009). OTA-based floating inductance simulator. In 2009 ICCAS-SICE, 857–860, IEEE. Fukuoka, Japan.
- Koukiou, G., & Psychalinos, C. (2010). Modular filter structures using current feedback operational amplifiers. Radioengineering, 19(4), 662–666.
- Kumar, N., Vista, J., & Ranjan, A. (2019). A tuneable active inductor employing DXCCTA: Grounded and floating operation. Microelectronics Journal, 90, 1–11. https://doi.org/https://doi.org/10.1016/j.mejo.2019.05.014
- Kumngern, M. (2012). DDTA and DDCCTA: New active elements for analog signal processing. In 2012 IEEE International Conference on Electronics Design, Systems and Applications (ICEDSA), 141–145. Kuala, Lumpur.
- Kushwaha, A. K., & Paul, S. K. (2016). Inductorless realization of Chua’s oscillator using DVCCTA. Analog Integrated Circuits and Signal Processing, 88(1), 137–150. https://doi.org/https://doi.org/10.1007/s10470-016-0746-9
- Martin, K., & Sedra, A. S. (1977). Designing leap-frog and SFG filters with optimum dynamic range. Proceedings of the IEEE, 65(8), 1210–1211. https://doi.org/https://doi.org/10.1109/PROC.1977.10675
- Nawrocki, R. (1987). Electronically tunable all-pole low-pass leapfrog ladder filter with operational transconductance amplifier. International Journal of Electronics Theoretical and Experimental, 62(5), 667–672. https://doi.org/https://doi.org/10.1080/00207218708921018
- Pandey, N., & Kumar, P. (2011a). Differential voltage current conveyor transconductance amplifier based wave active filter. Journal of Electron Devices, 10, 429–432.
- Pandey, N., & Kumar, P. (2011b). Realization of resistorless wave active filter using differential voltage current controlled conveyor transconductance amplifier. Radioengineering, 20(4), 911–916. https://www.radioeng.cz/fulltexts/2011/11_04_911_916.pdf
- Pandey, N., Kumar, P., & Choudhary, J. (2013). Current controlled differential difference current conveyor transconductance amplifier and its application as wave active filter. ISRN Electronics, 2013.
- Pandey, N., Kumar, P., & Paul, S. K. (2015). Voltage differencing transconductance amplifier based resistorless and electronically tunable wave active filter, Analog. Integrated Circuit and Signal Processing, 84(1), 107–117. https://doi.org/https://doi.org/10.1007/s10470-015-0546-7
- Rana, S., Kumawat, A. K., & Kumar, P. (2015). Dual output voltage differencing buffered amplifier based wave active filter. In 2015 IEEE UP Section Conference on Electrical Computer and Electronics (UPCON), 1–6. India.
- Scaumann, R., Ghausi, M. S., & Lake, K. R. (1990). Design of analog filters: Passive active RC and switched capacitor. Prentice Hall.
- Sedef, H., Sagbas, M., & Acar, C. (2008). Current-controllable fully-integrated inductor simulator using CCCIIs. International Journal of Electronics, 95(5), 425–429. https://doi.org/https://doi.org/10.1080/00207210801996071
- Sedra, A. S., & Brackett, P. O. (1978). Filter theory and design: Active and passive. Matrix publishers.
- Senani, R. (1984). Floating ideal FDNR using only two current conveyors. Electronics Letters, 20(5), 205–206. https://doi.org/https://doi.org/10.1049/el:19840136
- Senani, R. (1985). Novel higher-order active filter design using current conveyors. Electronics Letters, 21(22), 1055–1057. https://doi.org/https://doi.org/10.1049/el:19850749
- Senani, R. (1987). Generation of new two-amplifier synthetic floating inductors. Electronics Letters, 23(22), 1202–1203. https://doi.org/https://doi.org/10.1049/el:19870836
- Singh, H., Arora, K., & Prasad, D. (2014). VDTA-based wave active filter. Circuits and Systems, 5(5), 124–131. https://doi.org/https://doi.org/10.4236/cs.2014.55014
- Singh, S. V., Maheshwari, S., & Chauhan, D. S. (2011). Single MO-CCCCTA-based electronically tunable current/trans-impedance-mode biquad universal filter. Circuits and Systems, 2(1), 1–6. https://doi.org/https://doi.org/10.4236/cs.2011.21001
- Sotner, R., Jerabek, J., Prokop, R., & Vrba, K. (2011). Current gain controlled CCTA and its application in quadrature oscillator and direct frequency modulator. Radioengineering, 20(1), 317–326. https://www.radioeng.cz/fulltexts/2011/11_01_317_326.pdf
- Souliotis, G., & Fragoulis, N. (2006). Differential current-mode tunable wave active filters based on single-ended wave port terminators. IEEE Transactions on Circuits and Systems I: Regular Papers, 53(4), 821–828. https://doi.org/https://doi.org/10.1109/TCSI.2005.862069
- Spanidou, A., & Psychalinos, C. (2005). Current amplifier-based wave filters. Circuits, Systems and Signal Processing, 24(3), 303–313. https://doi.org/https://doi.org/10.1007/s00034-004-0120-5
- Srivastava, M., Prasasd, D., & Bashkar, D. R. (2017). New electronically tunable grounded inductor simulator employing single VDTA and one grounded capacitor. Journal of Engineering Science and Technology, 12(1), 113–126.
- Sun, Y., JEFFRIES, B., & Teng, J. (1998). Universal third-order OTA-C filters. International Journal of Electronics, 85(5), 597–609. https://doi.org/https://doi.org/10.1080/002072198133888
- Tan, M. A., & Schaumann, R. (1989). Simulating general-parameter LC-ladder filters for monolithic realizations with only transconductance elements and grounded capacitors. IEEE Transactions on Circuits and Systems, 36(2), 299–307. https://doi.org/https://doi.org/10.1109/31.20210
- Tangsrirat, W., & Channumsin, O. (2011). High-input impedance voltage-mode multifunction filter using a single DDCCTA and grounded passive elements. Radioengineering, 20(4), 905–910. https://www.radioeng.cz/fulltexts/2011/11_04_905_910.pdf
- Tangsrirat, W., & Surakampontorn, W. (2005). Realization of multiple-output biquadratic filters using current differencing buffered amplifiers. International Journal of Electronics, 92(6), 313–325. https://doi.org/https://doi.org/10.1080/00207210500141862
- Tarunkumar, H., Shantikumar Singh, Y., & Ranjan, A. (2020). An active inductor employing a new four terminal floating nullor transconductance amplifier (FTFNTA). International Journal of Electronics, 107(5), 683–702. https://doi.org/https://doi.org/10.1080/00207217.2019.1672807
- Temes, G. C., & LaPatra, J. W. (1977). Introduction to circuit synthesis and design (Vol. 5). McGraw-Hill Companies.
- Tingleff, J., & Toumazou, C. (1992). Current mode continuous time wave active filters. Electronics Letters, 28(5), 463–465. https://doi.org/https://doi.org/10.1049/el:19920292
- Tingleff, J., & Toumazou, C. (1995a). A 5th order lowpass current mode wave active filter in CMOS technology. Analog Integrated Circuits and Signal Processing, 7(2), 131–137. https://doi.org/https://doi.org/10.1007/BF01239167
- Tingleff, J., & Toumazou, C. (1995b). Integrated current mode wave active filters based on lossy integrators [CMOS chip]. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 42(5), 237–244. https://doi.org/https://doi.org/10.1109/81.386157
- Tsukutani, T., Higashimura, M., Ishida, M., Tsuiki, S., & Fukui, Y. (1996). A general class of current-mode high-order OTA-C filters. International Journal of Electronics, 81(6), 663–670. https://doi.org/https://doi.org/10.1080/002072196136355
- Wupper, H., & Meerkotter, K. (1975). New active filter synthesis based on scattering parameters. IEEE Transaction on Circuits and Systems, 22(7), 594–602. https://doi.org/https://doi.org/10.1109/TCS.1975.1084089
- Yuce, E. (2006). Floating inductance, FDNR and capacitance simulation circuit employing only grounded passive elements. International Journal of Electronics, 93(10), 679–688. https://doi.org/https://doi.org/10.1080/00207210600750208