An approach for designing leakage compensated voltage reference circuit

References

• Anushree, Dixit, A., Singh, N., & Kaur, J. (2021). Startup circuits for zero current reduction in bandgap reference circuit. Springer Lecture notes in Electrical Engineering: Advances in Micro-Electronics, Embedded Systems & IOT.
   Google Scholar
• Chin, K., San, H., Kitajima, A., Arai, Y., Yamashita, J., & Ito, H. (2016). Leakage current compensation technique of ESD protection circuit for CMOS operational amplifier. IEEE International symposium on intelligent signal processing and communication systems. https://doi.org/10.1109/ISPACS.2016.7824722
   Google Scholar
• Giustolisi, G., Palumbo, G., Criscione, M., & Cutri, F. (2003). A low-voltage low power voltage reference based on subthreshold MOSFETs. IEEE Journal of Solid-State Circuits, 38(1), 151–154. https://doi.org/10.1109/JSSC.2002.806266
   Web of Science ®Google Scholar
• Huang, P. H., Lin, H., & Lin, Y. T. (2006). A simple subthreshold CMOS voltage reference circuit with channel-length modulation compensation. IEEE Transactions on Circuits & Systems II: Express Briefs, 53(9), 882–885. https://doi.org/10.1109/TCSII.2006.881813
   Web of Science ®Google Scholar
• Huang, W., Zeng, Y., Yang, J., & Li, Y. (2023). A79Pw, 106ppm/◦C NMOS-only current reference with leakage current isolation based on body bias technique. International Journal of Electronics and Communication, 161, 1–9. https://doi.org/10.1016/j.aeue.2023.154539
   Google Scholar
• Ivanov, V., Brederlow, R., & Gerber, J. (2012). An ultra-low power bandgap operational at supply from 0.75 V. IEEE Journal of Solid-State Circuits, 47(7), 1515–1523. https://doi.org/10.1109/JSSC.2012.2191192
   Web of Science ®Google Scholar
• Lee, J. M., Ji, Y., & Choi, S. Cho, Y.C., Jang, S.J., Choi, J.S., Kim, B., Park, H.J. and Sim, J.Y. (2015). 5.7 A 29nW bandgap reference circuit. IEEE International Solid-State Circuits Conference (ISSCC) : Digest of Technical Papers (pp. 100–103). https://doi.org/10.1109/ISSCC.2015.7062945
   Google Scholar
• Liu, Y., Zhan, C., & Wang, L. (2018). An ultralow power subthreshold CMOS voltage reference without requiring resistors or BJTs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 26(1), 201–205. https://doi.org/10.1109/TVLSI.2017.2754442
   Web of Science ®Google Scholar
• Magnelli, L., Crupi, F., Corsonello, P., Pace, C., & Iannaccone, G. (2011). A 2.6 nW, 0.45 V temperature-compensated subthreshold CMOS voltage reference. IEEE Journal of Solid-State Circuits, 46(2), 465–474. https://doi.org/10.1109/JSSC.2010.2092997
   Web of Science ®Google Scholar
• Nilsson, J., Borg, J., & Johansson, J. (2017). High-temperature characterisation and analysis of leakage-current-compensated, low-power bandgap temperature sensors. Analog Integrated Circuits and Signal Processing, 93(1), 137–147. https://doi.org/10.1007/s10470-017-1011-6
   Web of Science ®Google Scholar
• Oliveira, A. C. D., Cordova, D., Klimach, H., & Bampi, S. (2017). Picowatt, 0.45–0.6 V self-biased subthreshold CMOS voltage reference. IEEE Transactions on Circuits & Systems I: Regular Papers, 64(12), 3036–3046. https://doi.org/10.1109/TCSI.2017.2754644
   Web of Science ®Google Scholar
• Pan, M., Pang, L., Xie, J., Han, Y., & Xu, Q. (2020). A 0.6V 44.6 ppm/ºC subthreshold CMOS voltage reference with wide temperature range and inherent leakage compensation. Integration the VLSI Journal, 72, 111–122. https://doi.org/10.1016/j.vlsi.2020.01.008
   Web of Science ®Google Scholar
• Radoias, L., Zegheru, C., & Brezeanu, G. (2012). Substrate leakage current influence on bandgap voltage references in automotive applications. IEEE International Semiconductor Conference (CAS) (pp. 389–392). https://doi.org/10.1109/SMICND.2012.6400752
   Google Scholar
• Ueno, K., Hirose, T., Asai, T., & Amemiya, Y. (2009). A 300 nW, 15 ppm/C, 20 ppm/V CMOS voltage reference circuit consisting of subthreshold MOSFETs. IEEE Journal of Solid-State Circuits, 44(7), 2047–2054. https://doi.org/10.1109/JSSC.2009.2021922
   Web of Science ®Google Scholar
• Wang, A., Calhoun, B. H., & Chandrakasan, A. P. (2006). Sub-threshold design for ultra low power system. Springer-Verlag. https://doi.org/10.1007/978-0-387-34501-7
   Google Scholar
• Wang, Y., Zhu, Z., Yao, J., & Yang, Y. (2015). A 0.45-V, 14.6-nW CMOS subthreshold voltage reference with no resistors and no BJTs. IEEE Transactions on Circuits & Systems II: Express Briefs, 62(7), 621–625. https://doi.org/10.1109/TCSII.2015.2415292
   Web of Science ®Google Scholar
• Zhu, Z., Hu, J., & Wang, Y. (2016). A 0.45 V, nano-watt 0.033%-line sensitivity MOSFET-only sub-threshold voltage reference with no amplifiers. IEEE Transactions on Circuits & Systems I: Regular Papers, 63(9), 1370–1380. https://doi.org/10.1109/TCSI.2016.2576643
   Web of Science ®Google Scholar