Reconfigurable manufacturing systems: the state of the art

References

• Adolfsson , J , Ng , A , Olofsgard , P , Moore , P , Pu , J and Wong , C-B . 2002 . Design and simulation of component-based manufacturing machine systems . Mechatronics , 12 : 1239 – 1258 .
   Web of Science ®Google Scholar
• Albus , JS . 1993 . A Reference Model Architecture for Intelligent Systems Design http://www.isd.mel.nist.gov/documents/albus/Ref_Model_Arch345.pdf
   Google Scholar
• AMICE . 1988 . “ Consortium ” . In Open System Architecture for CIM , Berlin : Springer .
   Google Scholar
• Arai , T , Aiyama , Y , Sugi , M and Ota , J . 2001 . Holonic assembly system with plug and produce . Compu. Indust. , 46 : 289 – 299 .
   Web of Science ®Google Scholar
• Arai , T , Maeda , Y , Kikuchi , H and Sugi , M . 2002 . Automated calibration of robot coordinates for reconfigurable assembly systems . Ann. CIRP , 51 ( 1 ) : 5 – 8 .
   Web of Science ®Google Scholar
• Arbib , V and Rossi , F . 2000 . Optimal resource assignment through negotiation in a multi-agent manufacturing system . IIE Trans. , 32 : 963 – 974 .
   Web of Science ®Google Scholar
• Aronson , RB . 1997 . Operation plug-and-play is on the way . Manuf. Eng. , 00 : 108 – 112 .
   Google Scholar
• Asl , FM , Ulsoy , AG and Koren , Y . 2000 . “ Dynamic modeling and stability of the reconfiguration of manufacturing systems ” . In Proceedings of the Japan–USA Symposium on Flexible Automation , Michigan : Ann Arbor .
   Google Scholar
• Amtec-Robotics . 2006 . http://www.amtec-robotics.com/
   Google Scholar
• Babic , B . 1999 . Axiomatic design of flexible manufacturing systems . Int. J. Prod. Res. , 37 ( 5 ) : 1159 – 1173 .
   Web of Science ®Google Scholar
• Balasubramanian , S , Brennan , RW and Norrie , D . 2001 . An architecture for metamorphic control of holonic manufacturing systems . Compu. Indust. , 46 : 13 – 31 .
   Web of Science ®Google Scholar
• Banazak , ZA , Skolud , B and Zaremba , MB . 2003 . Computer-aided prototyping of production flows for a virtual enterprise . J. Intell. Manuf. , 14 : 83 – 106 .
   Web of Science ®Google Scholar
• Benhabib , B , Chan , KC and Dai , MQ . 1991 . A modular programmable fixturing system . ASME J. Eng. Indust. , 113 : 93 – 99 .
   Web of Science ®Google Scholar
• Benjaafar , S , Heragu , SS and Irani , S . 2002 . Next generation factory layouts: research challenges and recent progress . Interfaces , 32 ( 6 ) : 58 – 76 .
   Web of Science ®Google Scholar
• Bi , ZM . 2002 . “ On Adaptive Robot Systems for Manufacturing Applications ” . In PhD thesis , Canada : University of Saskatchewan .
   Google Scholar
• Bi , ZM and Zhang , WJ . 2000 . Concurrent optimal design of modular robotic configuration . J. Robot. Sys. , 18 ( 2 ) : 77 – 87 .
   Web of Science ®Google Scholar
• Bi , ZM and Zhang , WJ . 2001 . Flexible fixture design and automation: review, issues, and future directions . Int. J. Prod. Res. , 39 ( 13 ) : 2867 – 2894 .
   Web of Science ®Google Scholar
• Boer , C and Jobane , F . 2002 . “ Flexible and reconfigurable manufacturing automation for mass customization ” . In 15th Triennial World Congress , Spain : Barcelona .
   Google Scholar
• Bongaerts , L , Monostori , L , McFarlane , D and Kadar , B . 2000 . Hierarchy in distributed shop floor control . Compu. Indust. , 43 : 123 – 137 .
   Web of Science ®Google Scholar
• Boothroyd , G , Dewhurst , P and Knight , W . 1994 . Product Design for Manufacturing and Assembly , New York : Marcel Dekker Inc. .
   Google Scholar
• Bostelman , R , Jacoff , A , Proctor , F , Kramer , T and Wavering , A . 2000 . “ Cable-based reconfigurable machines for large scale manufacturing ” . In Proceedings of the 2000 Japan–USA Symposium on Flexible Automation Michigan July 23–26
   Google Scholar
• Brussel , H , Bongaerts , L , Wyns , J , Valckenaers , P and Gingerachter , T. van . 1999 . A conceptual framework for holonic manufacturing: identification of manufacturing holons . J. Manuf. Sys. , 18 ( 1 ) : 35 – 52 .
   Web of Science ®Google Scholar
• Bussmann , S and Mcfarlane , DC . 1999 . “ Rationales for holonic manufacturing control ” . In Proceedings of the 2nd International Workshop on Intelligent Manufacturing Systems , 177 – 184 . Beigium : Leuven .
   Google Scholar
• Camarinha-Matos , LM , Afsarmanesh , H , Garita , C and Lima , C . 1998 . Towards an architecture of virtual enterprises . J. Intell. Manuf. , 9 : 189 – 199 .
   Web of Science ®Google Scholar
• Caplinskas , A . 1998 . AI paradigms . J. Intell. Manuf. , 9 : 493 – 502 .
   Web of Science ®Google Scholar
• Chen , L , Xi , JF and Wolf , A . 2001 . “ Modularization in reconfiguration design theory and methodology ” . In CIRP 1st International Conference on Reconfigurable Manufacturing , Michigan : Ann Arbor .
   Google Scholar
• Chen , I-M . 2001 . Rapid response manufacturing through reconfigurable robotic workcells . J. Robotics Compu. Integr. Manuf. , 17 ( 3 ) : 199 – 213 .
   Web of Science ®Google Scholar
• Chen , I-M . 1994 . “ Theory and Applications of Modular Reconfigurable Robotic Systems ” . In PhD thesis , USA : Division of Engineering and Applied Science, California Institute of Technology .
   Google Scholar
• Chen , I-M and Burdick , JW . 1995 . “ Determining task optimal modular robot assembly configurations ” . In IEEE International Conference on Robotics and Automation 132 – 137 . Nagoya, Aichi, , Japan May 21–27
   Google Scholar
• Chick , SE , Olsen , TL , Sethuraman , K , Stecke , KE and White III , CC . 2000 . A descriptive multi-attribute model for reconfigurable machining system selection examining buyer-supplier relationship . Int. J. Agile Manage. Sys. , 2 ( 1 ) : 33 – 48 .
   Google Scholar
• Chirm , J-L and Mcfarland , DC . 2000 . “ A holonic component-based approach to reconfigurable manufacturing control architecture ” . In Proceedings of HolonMas00 London September
   Google Scholar
• Cooke , A , Shankar , N , Jones , L , Ewaldz , D , Haynes , L , Martinez , D , Wada , B and Zweben , C . 1995 . Advanced reconfigurable machine for flexible fabrication . SPIR , 2447 : 102 – 114 .
   Google Scholar
• Corrêa , HL . 2001 . Agile manufacturing as a 21st Century strategy for improving manufacturing competitiveness http://www.correa.com.br/biblioteca/artigos/
   Google Scholar
• Davis , SM . 1987 . Future Perfect , New York : Addison-Wesley .
   Google Scholar
• Degaspari , J . 2002 . All in the family . Mech. Eng. , Feburary : 56 – 58 .
   Web of Science ®Google Scholar
• Deumeingts , G , Vallespir , B , Zanettin , M and Chen , D . 1992 . GRAI-GIM Integrated Methodology, a Methodology for Designing CIM Systems , France : University Bordeaux I . Version 1.0 LAP/GRAI
   Google Scholar
• Dove , R . 1995 . Agility engineering: Lego lessons . Production , March
   Google Scholar
• Erixon , G . 1998 . Modular function deployment–a method for product modularisation, Doctoral thesis , Stockholm : Royal Institute of Technology .
   Google Scholar
• Erol , NA , Altintas , Y and Ito , MR . 2000 . Open system architecture modular tool kit for motion and machining process control . IEEE/ASME Trans. Mechatr. , 5 ( 3 ) : 281 – 291 .
   Web of Science ®Google Scholar
• Fassi , I and Wiens , GJ . 2000 . Multiaxis machining: PKMs and traditional machining centers . J. Manuf. Process. , 2 ( 1 ) : 1 – 13 .
   Google Scholar
• Faulkner , D , Levy , B and Garner , T . 1999 . “ Open-architecture platforms ” . In Circuits Assembly http://www.cassembly.com, January
   Google Scholar
• Fralix , MT . 2001 . From mass production to mass customization . J. Textile Apparel, Technol. Manage. , 1 ( 2 ) : 1 – 7 .
   Google Scholar
• Fryer , AJ , Mckee , GT and Schenker , PS . 1997 . “ Configuring robots from modules: an objected oriented approach ” . In 8th International Conference on Advanced Robotics 907 – 912 . Monterey, CA, , USA
   Google Scholar
• Fukuda , T and Takagawa , I . 2000 . “ Design and control of flexible transfer system ” . In Proceedings of the 3rd World Congress on Intelligent Control and Automation 17 – 22 . Heifei, , China June 28–July 2
   Google Scholar
• Giusti , F , Santochi , M and Arioti , A . 1994 . A reconfigurable assembly cell for mechanical products . Ann. CIRP , 43 ( 1 ) : 1 – 14 .
   Google Scholar
• Goldman , SL and Preiss , K . 1992 . 21st Century Manufacturing Strategy , Iacocca Institute, Lehigh University, Report to US congress .
   Google Scholar
• Gunasekaran , A . 1997 . Implementation of computer-integrated manufacturing: a survey of integration and adaptability issues . Int. J. Compu. Integr. Manuf. , 10 ( 1–4 ) : 266 – 280 .
   Web of Science ®Google Scholar
• Gupta , D and Benjaafar , S . 2004 . Make-to-order, make-to-stock, or delay product differentiation’ a common framework for modeling and analysis . IIE Trans. , June : 529 – 546 .
   Web of Science ®Google Scholar
• Haas , E , Schwarz , RC and Papazian , JM . 2002 . Design and test of a reconfigurable forming die . J. Manuf. Process. , 4 ( 1 ) : 77 – 85 .
   Google Scholar
• Harrison , R , Weston , RH and Monfared , RP . 2001 . Distributed engineering of manufacturing machines . Proc. Inst. Mech. Eng. , 215 ( B ) : 217 – 231 .
   Web of Science ®Google Scholar
• Heilala , J and Voho , P . 2001 . Modular reconfigurable flexible final assembly systems . Assembly Automat. , 21 ( 1 ) : 20 – 28 .
   Web of Science ®Google Scholar
• Heikkila , T , Kollingbaum , M , Valckenaer , P and Bluemink , G-J . 2001 . An agent architecture for manufacturing control: ManAge . Compu. Indust. , 46 : 315 – 331 .
   Web of Science ®Google Scholar
• Ho , JKL and Ranky , PG . 1997 . Object oriented modeling and design of reconfigurable conveyors in flexible assembly systems . Int. J. Compu. Integr. Manuf. , 10 ( 5 ) : 360 – 379 .
   Web of Science ®Google Scholar
• Hon , KKB and Lopez-Jaquez , FJ . 2002 . Configuration of manufacturing cells for dynamic manufacturing . Ann. CIRP , 51 ( 1 ) : 391 – 394 .
   Web of Science ®Google Scholar
• Hong , NK and Hong , S . 1998 . Entity-based models for computer-aided design systems . J. Comp. Civil Eng. , 12 ( 1 ) : 30 – 41 .
   Web of Science ®Google Scholar
• Hooper , R and Tesar , D . 1994 . Computer-aided configuration of modular robotics systems . Compu. Contr. Eng. J. , June : 137 – 142 .
   Web of Science ®Google Scholar
• Ishii , K , Juengel , C and Eubanks , CF . Design for product variety: key to product line structuring . 1995 Design Engineering Technical Conference, ASME , 2(DE-83) 499 – 506 .
   Google Scholar
• Kalita , D and Khargonekar , PP . 2002 . Formal verification for analysis and design of logic controllers for reconfigurable machining systems . IEEE Trans. Robot. Automat. , 18 ( 4 ) : 463 – 474 .
   Google Scholar
• Katz , R , Li , Z and Pierrot , F . 2002 . Engineering Research Center for Reconfigurable Machining Systems: Conceptual Design of a High-Speed Drilling Machine (HSDM) Based on PKM Module Ann Arbor ERC/RMS Report #37, College of Engineering, The University of Michigan, March
   Google Scholar
• Katzy , BR and Dissel , M . 2001 . A toolset for building the virtual enterprise . J. Intell. Manuf. , 12 : 121 – 131 .
   Web of Science ®Google Scholar
• Kaula , R . 1998 . A modular approach toward flexible manufacturing . Integr. Manuf. Sys. , 9 ( 2 ) : 77 – 86 .
   Google Scholar
• Kim , B . 2002 . “ Intelligent agent based planning, scheduling, and control: warehouse management application ” . In PhD thesis , Troy, NY, , USA : Rensselaer Polytechnic Institute .
   Google Scholar
• Koren , Y . 1999 . Will industry adopt PKMs? . Manuf. Eng. , 122 ( 3 ) : 240
   Web of Science ®Google Scholar
• Koren , Y , Heisel , U , Joveane , F , Moriwaki , T , Pritschow , G , Ulsoy , G and van Brussel , H . 1999 . Reconfigurable manufacturing systems . Ann. CIRP , 48 ( 2 ) : 1 – 1 .
   Google Scholar
• Kosanke , K , Vernadat , F and Zelm , M . 1999 . CIMOSA: enterprise engineering and integration . Compu. Indust. , 40 : 83 – 97 .
   Web of Science ®Google Scholar
• Kota , S and Chiou , S-J . 1992 . Conceptual design of mechanisms based on computational synthesis and simulation of kinematic building blocks . Res. Eng. Design , 4 : 75 – 87 .
   Google Scholar
• Krause , F-L and Jansen , H . 1996 . Life Cycle Modeling for Innovative Products and Processes , New York : Charman & Hall .
   Google Scholar
• Kuhnle , H . 2001 . A state-time model to measure the reconfigurability of manufacturing areas–key to performance . Integr. Manuf. Sys. , 12 ( 7 ) : 493 – 499 .
   Google Scholar
• Landers , RG . 2000 . “ A new paradigm in machine tools: reconfigurable machine tools ” . In 2000 Japan–USA Symposium on Flexible Automat , MI : Ann Arbor . July 23–26
   Google Scholar
• Langer , G and Alting , L . 2000 . An architecture for agile shop floor control systems . J. Manuf. Sys. , 19 ( 4 ) : 267 – 280 .
   Web of Science ®Google Scholar
• Lee , GH . 1997 . Reconfigurability consideration design of components and manufacturing systems . Int. J. Adv. Manuf. Technol. , 13 : 376 – 386 .
   Web of Science ®Google Scholar
• Leger , C . 1999 . “ Automated synthesis and optimization of robot configurations: an evolutionary approach ” . In PhD thesis , Pittsburgh, PA, , USA : Carnegie Mellon University .
   Google Scholar
• Levin , M.Sh. 2002 . Towards combinatorial analysis, adaptation, and planning of human-computer systems . Appl. Intell. , 16 ( 3 ) : 235 – 247 .
   Web of Science ®Google Scholar
• Li , H and Williams , TJ . 2002 . Management of complexity in enterprise integration projects by the PERA methodology . J. Intell. Manuf. , 13 : 417 – 427 .
   Web of Science ®Google Scholar
• Liles , DH and Huff , BL . 1990 . A computer based production scheduling architecture suitable for driving a reconfigurable manufacturing system . Compu. Indust. , 19 ( 1–4 ) : 1 – 5 .
   Web of Science ®Google Scholar
• Lucas , MR , Endsley , EW and Tilbury , DM . 1999 . “ Coordinate logic control for reconfigurable machining systems ” . In Proceedings of the American Control Conference 2107 – 2113 . San Diego, CA
   Google Scholar
• Marik , V , Fletcher , M and Pechoucek , M . 2002 . “ Holons & agents: recent developments and mutual impacts ” . In Multi-agent Systems and Applications II , Edited by: Marik , V. , Stepankova , O. , Krautwurmova , H. and Luck , M. 233 – 267 . Berlin : Springer .
   Google Scholar
• Markus , A , Vancza , TK and Monostori , L . 1996 . A market approach to holonic manufacturing . Ann. CIRP , 45 ( 1 ) : 433 – 436 .
   Google Scholar
• Mckinsey Quarterly . 2002 . The False Promise of Mass Customization http://www.iceved.com/ICEVED3/Servicio.nsf/
   Google Scholar
• Mellor , C . 2002 . Quick-change artists: why techs must get ready for reconfigurable manufacturing . Ontario Technol. , January/February : 12 – 15 .
   Google Scholar
• McGrath , ME . 1995 . Product Strategy for High-technology Companies , Homewood IL : Irwin .
   Google Scholar
• Mehrabi , MG , Ulsoy , AG and Koren , Y . 2000a . Reconfigurable manufacturing systems and their enabling technologies . Int. J. Manuf. Technol. Manage. , 1 ( 1 ) : 113 – 130 .
   Google Scholar
• Mehrabi , MG , Ulsoy , AG and Koren , Y . 2000b . Reconfigurable manufacturing systems: key to future manufacturing . J. Intell. Manuf. , 11 : 403 – 419 .
   Web of Science ®Google Scholar
• Mehrabi , MG , Ulsoy , AG , Koren , Y and Heytler , P . 2002 . Trends and perspectives in flexible and reconfigurable manufacturing systems . J. Intell. Manuf. , 13 : 135 – 146 .
   Web of Science ®Google Scholar
• Mehrabi , MG and Kannatey-Asibu , E . 2001 . Mapping theory: a new approach to design of multi-sensor monitoring of reconfigurable machining system (RMS) . J. Manuf. Sys. , 20 ( 5 ) : 297 – 303 .
   Web of Science ®Google Scholar
• Monfared , RP and Weston , RH . 1997 . reconfiguration of manufacturing cell control systems and reuse of their components . Proc. Inst. Mech. Eng. , 211 ( B ) : 495 – 508 .
   Web of Science ®Google Scholar
• Moon , Y-M and Kota , S . 2000 . “ Synthesis of reconfigurable machine tools with screw theory ” . In Proceedings of DETC’00, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conference Baltimore, MD September 10–13, DETC2000/MECH-14066
   Google Scholar
• Moriwaki , T and Nonobik , M . 1994 . Object-oriented design support system for machine tools . J. Intell. Manuf. , 5 : 47 – 54 .
   Web of Science ®Google Scholar
• National Research Council, Commission on Engineering and Technical Systems . 1998 . Visionary Manufaturing Challenges for 2020 , Washington : National Academy Press .
   Google Scholar
• National Research Council of Canada . 2000 . Manufaturing Innovations: An Impact Strategy for 2000–2005 , NRC Manufaturing Technologies Group . http://web.mtg.nrc.ca
   Google Scholar
• Oakland , JS . 1993 . Total Quality Management: The Route to Improving Performance, 1993 , Boston, MA : Butterworth-Heinemann .
   Google Scholar
• O'Grady , J . 1988 . Putting the Just-in-time Philosophy into Practice , New York : Nichols Publishing Company .
   Google Scholar
• Okino , N . 1993 . “ Bionic manufacturing system ” . In Flexible Manufacturing Systems Past-Present-Future , Edited by: Peklenik , J . 73 – 95 . Ljubljana : Faculty of Mechanical Engineering .
   Google Scholar
• Ottaway , TA and Burns , JR . 2000 . An adaptive production control system utilizing agent technology . Int. J. Prod. Res. , 38 ( 4 ) : 721 – 737 .
   Web of Science ®Google Scholar
• Paredis , CJJ . 1996 . “ An agent-based approach to the design of rapidly deployable fault tolerant manipulators ” . In PhD thesis , Pittsburgh, PA : Department of Electrical and Computer Engineering, Carnegie Mellon University .
   Google Scholar
• Paredis , CJJ and Khosla , PK . 1993 . Serial link manipulators from task specifications . Int. Robot. Res. , 12 ( 3 ) : 274 – 287 .
   Web of Science ®Google Scholar
• Park , J , Park , J and Kim , J . 2000 . A generic event control framework for modular flexible manufacturing systems . Compu. Indust. Eng. , 38 : 107 – 123 .
   Web of Science ®Google Scholar
• Perremans , P . 1996 . Feature-based description of modular fixturing elements: the key to an expert system for the automatic design of the physical fixture . Adv. Eng. software , 25 ( 1 ) : 19 – 27 .
   Web of Science ®Google Scholar
• Pine , BJ II . 1992 . Mass customization: the new frontier in business competition . Aust. J. Manage. , 17 ( 2 ) : 273 – 284 .
   Google Scholar
• Prasad , B . 1996 . Concurrent Engineering Fundamentals , Englewood Cliffs, NJ : Prentice Hall .
   Google Scholar
• Pritschow , G , Altintas , Y , Jovane , F , Koren , Y , Mitsuishi , M , Takata , S , Brussel , H. van , Weck , M and Yamazaki , K . 2001 . Open controller architecture–past, present and future . Ann. Int. Inst. Prod. Eng. Res. (CIRP Ann.) , 50 ( 2 ) : 463 – 470 .
   Google Scholar
• Pritschow , G and Wurst , K-H . 1996 . “ Modular robots for flexible assembly ” . In Proceedings of the 28th CIRP International Seminar on Manufaturing System Advances in Manufaturing Technology–Focus on Assembly System 153 – 158 . South Africa, May 15–17
   Google Scholar
• Ramachandran , S and Chen , I-M . 2000 . “ Distributed agent based design of modular reconfigurable robots ” . In 5th International Conference on Computer Integrated Manufaturing 447 – 458 . Singapore
   Google Scholar
• Rogers , GG and Bottaci , L . 1997 . Modular production systems: a new manufacturing paradigm . J. Intell. Manuf. , 8 : 147 – 156 .
   Web of Science ®Google Scholar
• Sanchez , LM and Nagi , R . 2001 . A review of agile manufacturing system . Int. J. Prod. Res. , 39 ( 16 ) : 3561 – 3600 .
   Web of Science ®Google Scholar
• Shen , W and Norrie , DH . 1999 . Agent-based systems for intelligent manufacturing: a state of the art survey . Knowl. Infor. Sys. , 1 ( 2 ) : 129 – 156 .
   Google Scholar
• Shen , W , Norrie , DH and Batthes , J-PA . 2001 . Multi-agent Systems for Concurrent Intelligent Design and Manufaturing , New York : Taylor & Francis .
   Google Scholar
• Shirinzadeh , B . 1993 . Issues in the design of the reconfigurable fixture modules for robotic assembly . J. Manuf. Sys. , 12 ( 1 ) : 1 – 14 .
   Web of Science ®Google Scholar
• Shu , S , Wilkes , M and Kawamura , K . 2000 . “ Development of reusable, configurable, extensible holonic manufacturing system ” . In Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics 1679 – 1684 . Piscataway, , USA
   Google Scholar
• Sihn , W and Rist , T . 1998 . Experiences with the fractal company value shift . CIRP–J. Manuf. Sys. , 27 ( 1 ) : 23 – 30 .
   Google Scholar
• Sims , K . 1994 . “ Evolving virtual creatures ” . In Computer Graphics (Siggraph’94 Proceedings) 15 – 22 . July
   Google Scholar
• Smirnov, Alexander,Constraint & Agent-Based environment for Configuration Management of Manufaturing Systems . 1999 . http://www.ici.ro/ici/revista/sic99_1/art02.html
   Google Scholar
• Smith , PG and Reinertsen , DG . 1997 . Developing Products in Half the Time: New Rules, New Tools , 2nd , New York : Wiley .
   Google Scholar
• Spicer , P , Koren , Y , Shpitalni , M and Yip-Hoi , D . 2002 . Design principles for machining system configurations . Ann. CIRP , 51 ( 1 ) : 275 – 280 .
   Web of Science ®Google Scholar
• Stake , RB . 1999 . A hierarchical classification of the reasons for dividing products into modules , Sweden : Licentiate thesis, Department of Manufaturing Systems, Royal Institute of Technology .
   Google Scholar
• Subbu , R , Sanderson , AC , Hocaoglu , G and Graves , RJ . 1999 . Evolutionary decision support for distributed virtual design in modular product manufacturing . Prod. Plan. Cont. , 10 ( 7 ) : 627 – 642 .
   Web of Science ®Google Scholar
• Sugi , M , Maeda , Y and Aiyama , Y . 2001 . “ Holonic robot system: a flexible assembly system with high reconfigurability ” . In Proceedings of the IEEE International Conference on Robotics and Automat 799 – 805 . Seoul, Korea May 21–26
   Google Scholar
• Suh , NP . 1990 . The Principle of Design , Oxford : Oxford University Press .
   Google Scholar
• Tatra , M , Soparkar , N , Yook , J and Tilbury , D . Real-time data and coordination control for reconfigurable manufacturing systems 23 – 48 . Burlington, Vermont, , USA Real Time Database, in the Second International Workshop on 1997, RTDB '97, 18–19 September
   Google Scholar
• Taylor , GD . 1997 . Design for global manufacturing and assembly . IIE Trans. , 29 ( 7 ) : 585 – 597 .
   Web of Science ®Google Scholar
• Thematic Network . 2000 . MOSYN: Modular Synthesis of Advanced Machine Tools http://www.cecimo.be/TEAMS/Projects/mosyn/TEAMSUpdate-MOSYN.pdf
   Google Scholar
• Tian , G , Yin , G and Taylor , D . 2002 . Internet-based manufacturing: a review and a new infrastructure for distributed intelligent manufacturing . J. Intell. Manuf. , 13 : 323 – 338 .
   Web of Science ®Google Scholar
• Tilbury , DM and Kota , S . 1999 . “ Integrated machine and control design for reconfigurable machine tools ” . In Proceedings of the 1999 ASME/IEEE International conference on Advanced Intelligent Mechatronics 629 – 633 . September 19–23
   Google Scholar
• Tommila , T , Venta , O and Koskinen , K . 2001 . Next generation industrial automation–needs and opportunities . Automat. Technol. Rev. Espoo , : 34 – 41 .
   Google Scholar
• Tsai , Y-T and Wang , K-S . 1999 . The development of modular-based design in considering technology complexity . Eur. J. Oper. Res. , 119 : 692 – 703 .
   Web of Science ®Google Scholar
• Tseng , MM and Du , X . 1998 . Design by customers of mass customization products . CIRP Ann. , 47 ( 1 ) : 103 – 106 .
   Google Scholar
• Tseng , MM and Jiao , jianxin . 1997 . A variant approach to product definition by recognizing functional requirement patterns . J. Eng. Design , 18 ( 4 ) : 329 – 340 .
   Web of Science ®Google Scholar
• Tsukune , H , Tsukamoto , M , Matsushita , T , Tomita , F , Okada , K , Ogasawara , T , Takase , K and Tuba , T . 1993 . Modular manufacturing . J. Intell. Manuf. , 4 : 163 – 181 .
   Web of Science ®Google Scholar
• Turner , CJ , Legault , JM and Cox , DJ . 2000 . “ Configuration management for modular flexible small automation systems: a case study ” . In Proceedings of DETC’00, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conference Baltimore, MD September 10–13, DETC2000/MECH-14122
   Google Scholar
• Ueda , K , Markus , A , Monoston , L , Kals , HJJ and Arai , T . 2001 . Emergent synthesis methodologies for manufacturing . Ann. CIRP , 50 ( 2 ) : 535 – 551 .
   Web of Science ®Google Scholar
• Ueda , K , Vaario , J and Fujii , N . 1998 . Interactive manufacturing: human aspects for biological manufacturing systems . Ann. CIRP , 47 ( 1 ) : 389 – 392 .
   Google Scholar
• Unsal , C , Kylyccote , H and Khosla , PK . 1999 . “ I(CES)-cube: a modular self-reconfigurable bipartite robotic system ” . In Proceedings of SPIE, Vol. 3839: Sensor Fusion and Decentralized Control in Robot. Systems II 258 – 269 . Boston, MA 19–20 September
   Google Scholar
• Valjavec , M and Hardt , DE . 1999 . Closed-loop shape control of the stretch forming process over a reconfigurable tool: precision airframe skin fabrication . Manuf. Sci. Eng. , MED-Vol. 10 : 909 – 919 .
   Google Scholar
• Wang , S and Shin , KG . 2002 . Constructing reconfigurable software for machine control systems . IEEE Trans. Robot. Automat. , 18 ( 4 ) : 475 – 486 .
   Google Scholar
• Warendorf , P and Merchant , ME . 1986 . Development and future trends in computer-integrated manufacturing in USA . Int. J. Technol. Manage , 1 : 161 – 178 .
   Google Scholar
• Wata , K and Onosato , M . 1994 . Random manufacturing system: a new concept of manufacturing systems for production to order . Ann. CIRP , 43 ( 1 ) : 379 – 383 .
   Google Scholar
• Watson , I . 1999 . Case-based reasoning is a methodology not a technology . Knowledge-Based Sys. , 12 : 303 – 308 .
   Web of Science ®Google Scholar
• Weston , R . 1999 . Model-driven, component-based approach to reconfiguring manufacturing software systems . Int. J. Oper. Prod. Manage. , 19 ( 8 ) : 834 – 855 .
   Web of Science ®Google Scholar
• Williams , TJ . 1998 . “ The Purdue enterprise reference architecture and methodology (PERA) ” . In Handbook of Life Cycle Engineering: Concepts, Tools and Techniques , Edited by: Molina , A. , Sanchez , J.M. and Kusiak , A. London : Chapman & Hall .
   Google Scholar
• Womack , J , Jones , D and Roos , D . 1991 . The Machine that Changed the World , New York : Harper-Collins .
   Google Scholar
• Wortmann , JC , Muntslag , DR and Timmermans , PJM . 1997 . Customer-driven Manufaturing , New York : Chapman & Hall .
   Google Scholar
• Yigit , AS , Ulsoy , AG and Allahverdi , A . 2002 . Optimizing modular product design for reconfigurable manufacturing . J. Intell. Manuf. , 13 : 309 – 316 .
   Web of Science ®Google Scholar
• Yusuf , YY , Sarhadi , M and Gunasekaran , A . 1999 . Agile manufacturing: the drivers, concepts and attributes . Int. J. Prod. Eco. , 62 : 33 – 43 .
   Web of Science ®Google Scholar
• Zaremba , MB and Morel , G . 2003 . Integration and control of intelligence in distributed manufacturing . J. Intell. Manuf. , 14 : 25 – 42 .
   Web of Science ®Google Scholar
• Zhang , J , Chan , FTS , Li , P , Lau , HCW and Samaranayak , P . 2002 . Investigation of the reconfigurable control system for an agile manufacturing cell . Int. J. Prod. Res. , 40 ( 15 ) : 3709 – 3723 .
   Web of Science ®Google Scholar
• Zhang , X , Baiasubramanian , S , Brennan , RW and Norrie , D . 2000 . Design and implementation of a real-time holonic control system for manufacturing . Inform. Sci. , 127 : 23 – 44 .
   Web of Science ®Google Scholar
• Zhao , X , Wang , K and Luo , Z . 2000 . A stochastic model of a reconfigurable manufacturing system Part I, a framework . Int. J. Prod. Res. , 38 ( 10 ) : 2273 – 2285 .
   Web of Science ®Google Scholar