Integrated simulation–optimisation of pull control systems

References

• Aglan, Canan, and Mehmet Bulent Durmusoglu. 2014. “Lot-splitting Approach of a Hybrid Manufacturing System Under CONWIP Production Control: A Mathematical Model.” International Journal of Production Research (ahead-of-print) :1–23. In press.
   Web of Science ®Google Scholar
• Alfieri, A., and A. Matta. 2012a. “Mathematical Programming Formulations for Approximate Simulation of Multistage Production Systems.” European Journal of Operational Research 219 (3): 773–783.
   Web of Science ®Google Scholar
• Alfieri, A., and A. Matta. 2012b. “Mathematical Programming Representation of Pull Controlled Single-product Serial Manufacturing Systems.” Journal of Intelligent Manufacturing 23 (1): 23–35.
   Web of Science ®Google Scholar
• Alfieri, A., and A. Matta. 2013. “Mathematical Programming Time-based Decomposition Algorithm for Discrete Event Simulation.” European Journal of Operational Research 231 (3): 557–566.
   Web of Science ®Google Scholar
• Alfieri, A., A. Matta, and G. Pedrielli. In press. “Mathematical Programming Formulations for Approximate Simulation Optimization of Closed-loop Systems.” Annals of Operations Research. doi: 10.1007/s10479-013-1480-7.
   Google Scholar
• Axster, S., and K. Rosling. 1993. “Installation vs. Echelon Stock Policies for Multilevel Inventory Control.” Management Science 39 (10): 1274–1280.
   Web of Science ®Google Scholar
• Bonvik, A. M., C. E. Couch, and S. B. Gershwin. 1997. “A Comparison of Production-line Control Mechanisms.” International Journal of Production Research 35 (3): 789–804.
   Web of Science ®Google Scholar
• Chan, W. K., and L. W. Schruben. 2003. “Properties of Discrete Event Systems from Their Mathematical Programming Representations.” In Proceedings of the 2003 Winter Simulation Conference, edited by S. Chick, P. J. Sanchez, D. Ferrin, and D. J. Morrice, 496–502. Piscataway, NJ: Institute of Electrical and Electronics Engineers.
   Google Scholar
• Chan, W. K., and L. W. Schruben. 2008a. “Mathematical Programming Models of Closed Tandem Queueing Networks.” ACM Transactions on Modeling and Computer Simulation 19 (1).
   Web of Science ®Google Scholar
• Chan, W. K., and L. W. Schruben. 2008b. “Optimization Models of Discrete-event System Dynamics.” Operations Research 56 (5): 1218-1237.
   Web of Science ®Google Scholar
• Cochran, J. K., and H. A. Kaylani. 2008. “Optimal Design of A Hybrid Push/Pull Serial Manufacturing System with Multiple Part Types.” International Journal of Production Research 46 (4): 949–965.
   Web of Science ®Google Scholar
• Cottenceau, B., L. Hardouin, and I. Ouerghi. 2008. “Kanban Policy Improvement Thanks to a (max, +)-Algebra Analysis.” International Journal of Systems Science 39 (7): 689–698.
   Web of Science ®Google Scholar
• Dallery, Y., and G. Liberopoulos. 2000. “Extended Kanban Control System: Combining Kanban and Base Stock.” IIE Transactions 32 (4): 369–386.
   Web of Science ®Google Scholar
• Daniel, J. S. R., and C. Rajendran. 2006. “Heuristic Approaches to Determine Base-stock Levels in a Serial Supply Chain with a Single Objective and with Multiple Objectives.” European Journal of Operational Research 175 (1): 566–592.
   Web of Science ®Google Scholar
• Deleersnyder, J.-L., T. J. Hodgson, H. Muller-Malek, and P. J. O’Grady. 1989. “Kanban Controlled Pull Systems: An Analytic Approach.” Management Science 35 (9): 1079–1091.
   Web of Science ®Google Scholar
• Di Mascolo, M., Y. Frein, and Y. Dallery. 1996. “An Analytical Method for Performance Evaluation of Kanban Controlled Production Systems.” Operations Research 44 (1): 50–64.
   Web of Science ®Google Scholar
• Duri, C., Y. Frein, and M. Di Mascolo. 2000. “Comparison Among Three Pull Control Policies: Kanban, Base Stock, and Generalized Kanban.” Annals of Operations Research 93 (1–4): 41–69.
   Web of Science ®Google Scholar
• Frein, Y., M. Di Mascolo, and Y. Dallery. 1995. “On the Design of Generalized Kanban Control Systems.” International Journal of Operations and Production Management 15 (9): 158–184.
   Web of Science ®Google Scholar
• Fu, M. 2002. “Optimization for Simulation: Theory vs. Practice.” Journal on Computing 14 (3): 192–215.
   Google Scholar
• Gaury, E. G. A., J. P. C. Kleijnen, and H. Pierreval. 2001. “A Methodology to Customize Pull Control Systems.” Journal of the Operational Research Society 52 (7): 789–799.
   Web of Science ®Google Scholar
• Gaury, E. G. A., H. Pierreval, and J. P. C. Kleijnen. 2000. “An Evolutionary Approach to Select a Pull System Among Kanban, Conwip and Hybrid.” Journal of Intelligent Manufacturing 11 (2): 157–167.
   Web of Science ®Google Scholar
• Geraghty, J., and C. Heavey. 2005. “A Review and Comparison of Hybrid and Pull-type Production Control Strategies.” OR Spectrum 27 (2–3): 435–457.
   Google Scholar
• Hao, Q., and W. Shen. 2008. “Implementing a Hybrid Simulation Model for a Kanban-based Material Handling System.” Robotics and Computer-Integrated Manufacturing 24 (5): 635–646.
   Web of Science ®Google Scholar
• Helber, S., K. Schimmelpfeng, and R. Stolletz. 2011. “Setting Inventory Levels of CONWIP Flow Lines via Linear Programming.” BuR Business Research Journal 4 (1): 98–115.
   Google Scholar
• Helber, S., K. Schimmelpfeng, R. Stolletz, and S. Lagershausen. 2011. “Using Linear Programming to Analyze and Optimize Stochastic Flow Lines.” Annals of Operations Research 182 (1): 193–211.
   Web of Science ®Google Scholar
• Hopp, W. J., and M. L. Spearman. 2007. Factory Physics. New York: McGraw-Hill.
   Google Scholar
• Huang, C.-C., and A. Kusiak. 1996. “Overview of Kanban Systems.” International Journal of Computer Integrated Manufacturing 9 (3): 169–189.
   Web of Science ®Google Scholar
• Karaesmen, F., and Y. Dallery. 2000. “A Performance Comparison of Pull Type Control Mechanisms for Multi-Stage Manufacturing.” International Journal of Production Economics 68 (1): 59–71.
   Web of Science ®Google Scholar
• Kleijnen, J. P. C. 2008. “Design and Analysis of Simulation Experiments.” Vol. 111. International Series in Operations Research & Management Science. New York: Springer.
   Google Scholar
• Köchel, P., and U. Nieländer. 2002. “Kanban Optimization by Simulation and Evolution.” Production Planning & Control 13 (8): 725–734.
   Web of Science ®Google Scholar
• Koulouriotis, D. E., A. S. Xanthopoulos, and V. D. Tourassis. 2010. “Simulation Optimisation of Pull Control Policies for Serial Manufacturing Lines and Assembly Manufacturing Systems Using Genetic Algorithms.” International Journal of Production Research 48 (10): 2887–2912.
   Web of Science ®Google Scholar
• Liberopoulos, G., and Y. Dallery. 2000. “A Unified Framework for Pull Control Mechanisms in Multi-stage Manufacturing Systems.” Annals of Operations Research 93 (1–4): 325–355.
   Web of Science ®Google Scholar
• Matta, A. 2008. “Simulation Optimization with Mathematical Programming Representation Of Discrete Event Systems.” In Proceedings of the 2008 Winter Simulation Conference, edited by S. J. Mason, R. R. Hill, L. Monch, O. Rose, T. Jefferson, and J. W. Fowler, 1393–1400. Piscataway, NJ: Institute of Electrical and Electronics Engineers Inc.
   Google Scholar
• Matta, A., Y. Dallery, and M. Di Mascolo. 2005. “Analysis of Assembly Systems Controlled with Kanbans.” European Journal of Operational Research 166 (2): 310–336.
   Web of Science ®Google Scholar
• Ohno, K. 2011. “The Optimal Control of Just-in-time-based Production and Distribution Systems and Performance Comparisons with Optimized Pull Systems.” European Journal of Operational Research 213 (1): 124–133.
   Web of Science ®Google Scholar
• Oladipupo, O., A. Rotondo, P. Young, and J. Geraghty. 2014. “On Designing Robust Kanban Production Control Strategies in Multiproduct Manufacturing Environments.” Vol. 68. In Handbook of Research on Design and Management of Lean Production Systems, edited by V. Modrák and P. Semano, 68–88. Košice: IGI Global.
   Google Scholar
• Park, Chan-Woo, and Hyo-Seong Lee. 2013. “Performance Evaluation of a Multi-product CONWIP Assembly System with Correlated External Demands.” International Journal of Production Economics 144 (1): 334–344.
   Web of Science ®Google Scholar
• Pedrielli, G. 2013. “Discrete Event Systems Simulation-Optimization: Time Buffer Framework.” PhD thesis. Mechanical Engineering Department, Politecnico di Milano, Italy.
   Google Scholar
• Rouwenhorst, B., B. Reuter, V. Stockrahm, G. J. van Houtum, R. J. Mantel, and W. H. M. Zijm. 2000. “Warehouse Design and Control: Framework and Literature Review.” European Journal of Operational Research 122 (3): 515–533.
   Web of Science ®Google Scholar
• Schruben, LW. 2000. “Mathematical Programming Models of Discrete Event System Dynamics.” In Proceedings of the 2000 Winter Simulation Conference, edited by J. A. Joines, R. R. Bartona, K. Kang, and P. A. Fishwick, 381–385. Piscataway, NJ: Institute of Electrical and Electronics Engineers.
   Google Scholar
• Schwarz, J.A., and R. Stolletz. 2013. “A Sampling Approach for the Analysis of Time-dependent Stochastic Flow Lines.” In Proceedings of the 2013 Conference on Stochastic Models of Manufacturing and Service Operations, Kloster Seeon, Germany.
   Google Scholar
• Shang, K. H., and J.-S. Song. 2007. “Serial Supply Chains with Economies of Scale: Bounds and Approximations.” Operations Research 55 (5): 843–853.
   Web of Science ®Google Scholar
• Shang, K. H., J.-S. Song, and P. H. Zipkin. 2009. “Coordination Mechanisms in Decentralized Serial Inventory Systems with Batch Ordering.” Management Science 55 (4): 685–695.
   Web of Science ®Google Scholar
• Smew, W., P. Young, and J. Geraghty. 2013. “Supply Chain Analysis Using Simulation, Gaussian Process Modelling and Optimisation.” Operational Research 186 (3): 1099–1113.
   Google Scholar
• Song, D.-P. 2013. “Threshold-type Control Policies and System Stability for Serial Supply Chain Systems.” In Optimal Control and Optimization of Stochastic Supply Chain Systems, 131–148. New York: Springer.
   Google Scholar
• Spearman, M. L., and M. A. Zazanis. 1992. “Push and Pull Production Systems: Issues and Comparisons.” Operations Research 40 (3): 521–532.
   Web of Science ®Google Scholar
• Stolletz, R, and S. Weiss. 2013. “Buffer Allocation Using Exact Linear Programming Formulations and Sampling Approaches.” In Preprints of the 2013 IFAC Conference on Manufacturing Modelling, Management, and Control, Saint Petersburg, Russia.
   Google Scholar
• Wang, L.-F., and L.-Y. Shi. 2013. “Simulation Optimization: A Review on Theory and Applications.” Acta Automatica Sinica 39 (11): 1957–1968.
   Google Scholar
• Yan, H., G. Yin, and S. X. C. Lou. 1994. “Using Stochastic Optimization to Determine Threshold Values for the Control of Unreliable Manufacturing Systems.” Journal of Optimization Theory and Applications 83 (3): 511–539.
   Web of Science ®Google Scholar
• Yang, T., H.-P. Fu, and K.-Y. Yang. 2007. “An Evolutionary-simulation Approach for the Optimization of Multi-constant Work-in-process Strategya case study.” International Journal of Production Economics 107 (1): 104–114.
   Web of Science ®Google Scholar