References
- Alducin-Quintero, Gerardo, Alejandro Rojo, Francisco Plata, Arturo Hernndez, and Manuel Contero. 2012. “3D Model Annotation as a Tool for Improving Design Intent Communication: A Case Study on its Impact in the Engineering Change Process.” http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1736122.
- Alizon, Fabrice, Steven B. Shooter, and Timothy W. Simpson. 2006. “Reuse of Manufacturing Knowledge to Facilitate Platform-based Product Realization.” Journal of Computing and Information Science in Engineering 6 (2): 170–178. doi:10.1115/1.2202135.
- American Society of Mechanical Engineers. 2012. Digital Product Definition Data Practices: Engineering drawing and related documentation practices (Standard No. ASME Y14.41-2012). New York: The American Society of Mechanical Engineers. https://www.asme.org/products/codes-standards/y1441-2012-digital-product-definition-data.
- American Society of Mechanical Engineers. 2016. 3D Model Data Organization Schema (Standard No. ASME Y14.41.1-DRAFT). New York: The American Society of Mechanical Engineers. https://cstools.asme.org/csconnect/CommitteePages.cfm?Committee=100688394.
- Barnard Feeney, Allison, Simon P. Frechette, and Vijay Srinivasan. 2015. “A Portrait of an ISO STEP Tolerancing Standard as an Enabler of Smart Manufacturing Systems.” Journal of Computing and Information Science in Engineering 15 (2): 021001–021001. doi:10.1115/1.4029050.
- Booker, Peter Jeffrey. 1963. A History of Engineering Drawing, London: Chatto & Windus.
- Boothroyd Dewhurst Inc. 2016. DFA/DFM. http://www.dfma.com/software/dfma.htm.
- Camba, Jorge, Manuel Contero, Michael Johnson, and Pedro Company. 2014. “Extended 3D Annotations as a New Mechanism to Explicitly Communicate Geometric Design Intent and Increase CAD Model Reusability.” Computer-Aided Design 57: 61–73. http://www.sciencedirect.com/science/article/pii/S0010448514001456.
- Chang, Xiaomeng, Rahul Rai, and Janis Terpenny. 2010. “Development and Utilization of Ontologies in Design for Manufacturing.” Journal of Mechanical Design, Transactions of the ASME 132 (2): 0210091–02100912. doi:10.1115/1.4000697.
- Cochrane, Sean, Robert Young, Keith Case, Jennifer Harding, James Gao, Shilpa Dani, and David Baxter. 2009. “Manufacturing Knowledge Verification in Design Support Systems.” International Journal of Production Research 47 (12): 3179–3204. doi:10.1080/00207540701802452.
- da Silva, Carlos, Eduardo Sanches, Eduardo Gomes Salgado, Carlos Henrique Pereira Mello, Eduardo da Silva Oliveira, and Fabiano Leal. 2014. “Integration of Computer Simulation in Design for Manufacturing and Assembly.” International Journal of Production Research 52 (10): 2851–2866. doi:10.1080/00207543.2013.853887.
- Defense Acquisition University. 2011. DoD Life Cycle Management (LCM) & Product Support Manager (PSM) Rapid Deployment Training. http://www.dau.mil/homepage%20documents/PSM%20RDT%20%28v10%20Tailored2014%20Jun52011%29.pdf.
- Dencovski, Kristian, Ulrich Löwen, Timo Holm, Michael Amberg, Michael Amberg, Mathias Maurmaier, and Peter Göhner. 2010. Production System’s Life Cycle-oriented Innovation of Industrial Information Systems, book section 19, 389–410. doi:10.5772/9523.
- Dimensional Metrology Standards Consortium. 2014. Part 1: Overview and Fundamental Principles in Quality Information Framework (QIF) – An Integrated Model for Manufacturing Quality Information (Standard No. ANSI/DMSC QIF v.2.1). Burleson, TX: DMSC. http://qifstandards.org/download/.
- Energetics Inc. 2015. Measurement Science Roadmap for Prognostics and Health Management for Smart Manufacturing System. Report. National Institute of Standards and Technology.
- Gao, R., L. Wang, R. Teti, D. Dornfeld, S. Kumara, M. Mori, and M. Helu. 2015. “Cloud-enabled Prognosis for Manufacturing.” CIRP Annals -- Manufacturing Technology 64 (2): 749–772. http://www.sciencedirect.com/science/article/pii/S000785061500150X.
- Garbie, Ibrahim H. 2013. “DFSME: Design for Sustainable Manufacturing Enterprises (An Economic Viewpoint).” International Journal of Production Research 51 (2): 479–503. doi:10.1080/00207543.2011.652746.
- GE Aviation. 2013. Joined at the Hip: Where the 3-D Printed Jet Engine Meets the Human Body. http://www.gereports.com/post/74545196348/joined-at-the-hip-where-the-3-d-printed-jet.
- Geometric. 2015. Design for Manufacturing and Assembly. http://dfmpro.geometricglobal.com/.
- Guerra-Zubiaga, D. A., and R. I. M. Young. 2008. “Design of a Manufacturing Knowledge Model.” International Journal of Computer Integrated Manufacturing 21 (5): 526–539. doi:10.1080/09511920701258040.
- Hague, R., S. Mansour, and N. Saleh. 2004. “Material and Design Considerations for Rapid Manufacturing.” International Journal of Production Research 42 (22): 4691–4708. doi:10.1080/00207840410001733940.
- Hedberg Jr, Thomas. 2016. Enabling IIoT through Digital Thread Integration of Enterprise Systems. ARC Industry Forum. ARC Advisory Group. https://youtu.be/5sQaU5dGF8w.
- Hedberg Jr, Thomas D., Joshua Lubell, Lyle Fischer, Larry Maggiano, and Allison Barnard Feeney. 2016. “Testing the Digital Thread in Support of Model-based Manufacturing and Inspection.” Journal of Computing and Information Science in Engineering 16 (2): 1–10. doi:10.1115/1.4032697.
- Helu, Moneer, and Thomas Hedberg Jr. 2015. “Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed.” Procedia Manufacturing 1: 86–97. doi:10.1016/j.promfg.2015.09.066
- International Standards Organization. 2014. Industrial Automation Systems and Integration -- Product Data Representation and Exchange -- Part 242: Application Protocol: Managed M-based 3D Engineering (Standard No. ISO 10303-242:2014). Geneva: International Standards Organization. http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=57620.
- International Standards Organization. 2015. Technical Product Documentation -- Digital Product Definition Data Practices (Standard No. ISO 16792:2006). Geneva: International Standards Organization. http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=31065.
- Li, Min, Shuming Gao, and Charlie C. Wang. 2006. “Real-time Collaborative Design with Heterogeneous CAD Systems based on Neutral Modeling Commands.” Journal of Computing and Information Science in Engineering 7 (2): 113–125. doi:10.1115/1.2720880.
- Mentor Graphics2015. Design for Manufacturing with Calibre. http://www.mentor.com/products/ic-nanometer-design/design-for-manufacturing.
- MTConnect Institute. 2014. MTConnect (Standard No. MTConnect version 1.3.0). McLane, VA: MTConnect Institute. http://www.mtconnect.org/standard-documents?terms=on.
- Regli, William, Jarek Rossignac, Vadim Shapiro, and Vijay Srinivasan. 2016. “The New Frontiers in Computational Modeling of Material Structures.” Computer-Aided Design 77: 73–85. http://www.sciencedirect.com/science/article/pii/S0010448516300033.
- Reumler, Shawn P, Kyle E Zimmerman, Nathan Hartman, Thomas Hedberg Jr, and Allison Barnard Feeney. 2016. “Promoting Model-based Definition to Establish a Common Information Model.” Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference: June 27-July1, 2016, Blacksburg, VA. New York: ASME.
- Rezakhanlou, Fraydoun, and Cedric Villani. 2008. Entropy methods for the Boltzmann equation (lectures from a special semester at the Centre mile Borel, Institut H. Poincar, Paris, 2001), Germany: Springer.
- Shannon, Claude Elwood. 1948. “A Mathematical Theory of Communication.” The Bell System Technical Journal 27: 379–423. http://cm.bell-labs.com/cm/ms/what/shannonday/shannon1948.pdf.
- Trainer, Asa, Thomas Hedberg Jr, Allison Barnard Feeney, Kevin Fischer, and Phil Rosche. 2016. “Gaps Analysis of Integrating Product Design, Manufacturing, and Quality Data in the Supply Chain using Model-based Definition.” Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference: June 27-July1, 2016, Blacksburg, VA. New York: ASME.
- Whittenburg, Mitzi. 2012. “Model-based Enterprise: An Innovative Technology-enabled Contract Management Approach.” Journal of Contract Management 10: 103–112.
- Wu, Dazhong, J. Lane Thames, David W. Rosen, and Dirk Schaefer. 2013. “Enhancing the Product Realization Process with Cloud-based Design and Manufacturing Systems.” Journal of Computing and Information Science in Engineering 13 (4). doi: 10.1115/1.4025257.
- Wu, Dazhong, David W. Rosen, Lihui Wang, and Dirk Schaefer. 2015. “Cloud-based Design and Manufacturing: A New Paradigm in Digital Manufacturing and Design Innovation.” Computer-Aided Design 59: 1–14. http://www.sciencedirect.com/science/article/pii/S0010448514001560.
- Xu, Xun. 2012. “From Cloud Computing to Cloud Manufacturing.” Robotics and Computer-Integrated Manufacturing 28 (1): 75–86. http://www.sciencedirect.com/science/article/pii/S0736584511000949.
- Young, Bob, Anne-Francoise Cutting-Decelle, David Guerra, George Gunendran, Bishnu Das, and Sean Cochrane. 2005. Sharing Manufacturing Information and Knowledge in Design Decision and Support, book section 14, 173–185. Netherlands: Springer.
- Young, R. I. M., A. G. Gunendran, A. F. Cutting-Decelle, and M. Gruninger. 2007. “Manufacturing Knowledge Sharing in PLM: A Progression Towards the Use of Heavy Weight Ontologies.” International Journal of Production Research 45 (7): 1505–1519. doi: 10.1080/00207540600942268.