Set-up and production planning in hybrid manufacturing–remanufacturing systems with large returns

References

• Akcali, E., and S. Cetinkaya. 2011. “Quantitative Models for Inventory and Production Planning in Closed-loop Supply Chains.” International Journal of Production Research 49 (8): 2373–2407.
   Web of Science ®Google Scholar
• Assid, M., A. Gharbi, and A. Hajji. 2015. “Joint Production, Setup and Preventive Maintenance Policies of Unreliable Two-product Manufacturing Systems.” International Journal of Production Research 53 (15): 4668–4683.
   Web of Science ®Google Scholar
• Boukas, E. K., and J. P. Kenne. 1997. “Maintenance and Production Control of Manufacturing Systems with Setups.” Lectures in Applied Mathematics 33 (3): 545–567.
   Google Scholar
• Bulmus, S., S. X. Zhu, and R. Teunter. 2013. “Capacity and Production Decisions Under a Remanufacturing Strategy.” International Journal of Production Economics 145 (1): 359–370.
   Web of Science ®Google Scholar
• Cai, X., M. Lai, X. Li, Y. Li, and X. Wu. 2014. “Optimal Acquisition and Production Policy in a Hybrid Manufacturing/Remanufacturing System with Core Acquisition at Different Quality Levels.” European Journal of Operational Research 233 (2): 374–382.
   Web of Science ®Google Scholar
• Elhafsi, M., and S. X. Bai. 1996. “Optimal Production Control of a Dynamic Two-product Manufacturing System with Setup Costs and Setup Times.” Journal of Global Optimization 9: 183–216.
   Web of Science ®Google Scholar
• Flapper, S. M., J.-P. Gayon, and L. Lim. 2014. “On the Optimal Control of Manufacturing and Remanufacturing Activities with a Single Shared Server.” European Journal of Operational Research 234: 86–98.
   Web of Science ®Google Scholar
• Fleischmann, M., J. M. Bloemhof-Ruwaard, R. Dekker, E. Van der Laan, J. A. E. E. Van Nunen, and L. N. Van Wassenhove. 1997. “Quantitative Models for Reverse Logistics: A Review.” European Journal of Operational Research 103 (1): 1–17.
   Web of Science ®Google Scholar
• Gharbi, A., J. P. Kenne, and A. Hajji. 2006. “Operational Level Based Policies in Production Rate Control of Unreliable Manufacturing Systems with Set-ups.” International Journal of Production Research 44 (3): 545–567.
   Web of Science ®Google Scholar
• Gupta, S. M., ed. 2014. Reverse Supply Chains: Issues and Analysis. Boca Raton, FL: CRC Press, Taylor \ & Francis Group.
   Google Scholar
• Hajji, A., A. Gharbi, and J. P. Kenne. 2004. “Production and Set-up Control of a Failure-prone Manufacturing System.” International Journal of Production Research 42 (6): 1107–1130.
   Web of Science ®Google Scholar
• Huang, Y.-S., M.-W. Chen, and C.-C. Fang. 2013. “A Study of the Optimal Production Strategy for Hybrid Production Systems.” International Journal of Production Research 51 (19): 5853–5865.
   Web of Science ®Google Scholar
• Kenne, J. P., P. Dejax, and A. Gharbi. 2012. “Production Planning of a Hybrid Manufacturing - Remanufacturing System Under Uncertainty Within a Closed-loop Supply Chain.” International Journal of Production Economics 135 (1): 81–93.
   Web of Science ®Google Scholar
• Khmelnitsky, E., E. Presman, and S. Sethi. 2011. “Optimal Production Control of a Failure-prone Machine.” Annals of Operations Research 182: 67–86.
   Web of Science ®Google Scholar
• Kiesmuller, G. P., and C. W. Scherer. 2003. “Computational Issues in a Stochastic Finite Horizon One Product Recovery Inventory Model.” European Journal of Operational Research 146 (3): 553–579.
   Web of Science ®Google Scholar
• Kouedeu, A., J.-P. Kenne, P. Dejax, V. Songmene, and V. Polotski. 2015. “Stochastic Models and Numerical Solutions for Manufacturing/Remanufacturing Systems with Applications to the Printer Cartridge Industry.” Journal of Manufacturing Systems 37 (3): 662–671.
   Google Scholar
• Krikke, H. R., A. V. Harten, and P. C. Shuur. 1999. “Business Case Océ: Reverse Logistic Network Re-design for Copiers.” OR Spektrum 21: 381–409.
   Google Scholar
• Kushner, H., and P. Dupuis. 1992. Numerical Methods for Stochastic Control Problems in Continuous Time. New York: Springer Verlag.
   Google Scholar
• Li, X., Y. Li, and S. Saghafian. 2013. “A Hybrid Manufacturing/Remanufacturing System with Random Remanufacturing Yield and Market-driven Product Acquisition.” IEEE Transactions on Engineering Management 60 (2): 424–437.
   Web of Science ®Google Scholar
• Minner, S., and R. Kleber. 2001. “Optimal Control of Production and Remanufacturing in a Simple Recovery Model with Linear Cost Functions.” OR Spectrum 23 (3): 3–24.
   Google Scholar
• Ostlin, J., and H. Ekholm. 2007. “Lean Production Principles in Remanufacturing -- A Case Study at a Toner Cartridge Remanufacturer.” Proceedings of the IEEE International Symposium on Electronics and the Environment, 216–221.
   Google Scholar
• Polotski, V., J.-P. Kenne, and A. Gharbi. 2015a. “Optimal Production Scheduling for Manufacturing--remanufacturing Systems with Setups.” Journal of Manufacturing Systems 37 (3): 703–714.
   Web of Science ®Google Scholar
• Polotski, V., J.-P. Kenne, and A. Gharbi. 2015b. “Failure-prone Manufacturing Systems with Setups: Feasibility and Optimality Under Various Hypotheses About Perturbations and Setup Interplay.” International Journal of Mathematics in Operational Research 7 (6): 681–705.
   Google Scholar
• Polotski, V., J.-P. Kenne, and A. Gharbi. 2015c. “Production and Setup Policy Optimization for Hybrid Manufacturing--Remanufacturing Systems. In 15th IFAC Symposium on Information Control Problems in Manufacturing edited by A. Dolgui and M. Zaremba, IFAC-Papers.” OnLine 48 (3): 2021–2026.
   Google Scholar
• Polotski, V., J.-P. Kenne, and A. Gharbi. 2016. “Production and Setup Policy Optimization for Hybrid Manufacturing--Remanufacturing Systems.” International Journal of Production Economics 183(Part B): 322–333.
   Web of Science ®Google Scholar
• Rubio, S., and A. Corominas. 2008. “Optimal Manufacturing--remanufacturing Policies in a Lean Production Environment.” Computers & Industrial Engineering 55 (1): 234–242.
   Web of Science ®Google Scholar
• Srivatsan, N., and Y. Dallery. 1998. “Partial Characterization of Optimal Hedging Point Policies in Unreliable Two-part-type Manufacturing Systems.” Operations Research 46 (1): 36–45.
   Web of Science ®Google Scholar
• Sharifnia, A., M. Caramanis, and S. Gershwin. 1991. “Dynamics and Flow Control in Manufacturing Systems.” Discrete Event Dynamic Systems Theory and Applications 1: 149–175.
   Google Scholar
• Tang, O., and R. Teunter. 2006. “Economic Lot Scheduling Problem with Returns.” Production and Operations Management 15 (4): 488–497.
   Web of Science ®Google Scholar
• Teunter, R., Z. Bayindir, and W. V. D. Heuvel. 2006. “Dynamic Lot Sizing with Product Returns and Remanufacturing.” International Journal of Production Research 44 (20): 4377–4400.
   Web of Science ®Google Scholar
• Van der Laan, E., M. Salomon, R. Dekker, and L. N. van Wassenhove. 1999. “Inventory Control in Hybrid Systems with Remanufacturing.” Management Science 45: 733–747.
   Web of Science ®Google Scholar
• Vercraene, S., J.-P. Gayon, and S. Flapper. 2014. “Coordination of Manufacturing, Remanufacturing and Returns Acceptance in Hybrid Manufacturing/Remanufacturing Systems.” International Journal of Production Economics 148: 62–70.
   Web of Science ®Google Scholar
• Xu, X., Y. Li, and X. Cai. 2012. “Optimal Policies in Hybrid Manufacturing/Remanufacturing Systems with Random Price-sensitive Product Returns.” International Journal of Production Research 50 (23): 6978–6998.
   Web of Science ®Google Scholar
• Yang, J., H. Yan, and M. I. Taksar. 2000. “Optimal Production and Setup Scheduling: A One Machine, Two Product System.” Annals of Operations research 98: 291–311.
   Web of Science ®Google Scholar
• Zanoni, S., I. Ferretti, and O. Tang. 2006. “Cost Performance and Bullwhip Effect in a Hybrid Manufacturing and Remanufacturing System with Different Control Policies.” International Journal of Production Research 44 (18--19): 3847–3862.
   Web of Science ®Google Scholar