Theory of constraints: review and bibliometric analysis

References

• Abdelsalam, H. M., M. Magdy, and A. M. AlShaar. 2013. “Optimal Location of New Distribution Center in Supply Chain Network Design with Varying Inventory Capacity.” In Handbook of Optimization, Intelligent Systems Reference Library, vol 38, edited by I. Zelinka, V. Snášel, and A. Abraham. Springer, Berlin, Heidelberg. doi: 10.1007/978-3-642-30504-7_22
   Google Scholar
• Adams, J., E. Balas, and D. Zawack. 1988. “Shifting Bottleneck Procedure for Job Shop Scheduling.” Management Science 34 (3): 391–401. doi: 10.1287/mnsc.34.3.391
   Web of Science ®Google Scholar
• Aryanezhad, M. B., and A. R. Komijan. 2004. “An Improved Algorithm for Optimizing Product Mix Under the Theory of Constraints.” International Journal of Production Research 42 (20): 4221–4233. doi: 10.1080/00207540410001695961.
   Web of Science ®Google Scholar
• Atwater, J. B., and S. S. Chakravorty. 2002. “A Study of the Utilization of Capacity Constrained Resources in Drum-Buffer-Rope Systems.” Production and Operations Management 11 (2): 259–273. doi: 10.1111/j.1937-5956.2002.tb00495.x
   Web of Science ®Google Scholar
• Banerjee, A., and S. K. Mukhopadhyay. 2016. “A Contemporary TOC Innovative Thinking Process in the Backdrop of Leagile Supply Chain.” Journal of Enterprise Information Management 29 (3): 400–431. doi: 10.1108/JEIM-08-2014-0086
   Web of Science ®Google Scholar
• Barnard, A. 2010. “Continuous Improvement and Auditing.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 403–454. New York, NY: McGraw-Hill.
   Google Scholar
• Barnard, A., and R. E. Immelman. 2010. “Holistic TOC Implementation Case Studies – Lessons Learned from the Public and Private Sector.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 455–498. New York, NY: McGraw-Hill.
   Google Scholar
• Bashiri, M., and M. M. Tabrizi. 2010. “Supply Chain Design: A Holistic Approach.” Expert Systems with Applications 37 (1): 688–693. doi:10.1016/j.eswa.2009.06.006.
   Web of Science ®Google Scholar
• Benavides, M. B., and H. Van Landeghem. 2015. “Implementation of S-DBR in Four Manufacturing SMEs: A Research Case Study.” Production Planning & Control 26 (13): 1110–1127. doi: 10.1080/09537287.2015.1015060
   Web of Science ®Google Scholar
• Betterton, C. E., and J. F. Cox III. 2009. “Espoused Drum-Buffer-Rope Flow Control in Serial Lines: A Comparative Study of Simulation Models.” International Journal of Production Economics 117 (1): 66–79. doi: 10.1016/j.ijpe.2008.08.050
   Web of Science ®Google Scholar
• Bevilacqua, M., F. E. Ciarapica, and G. Giacchetta. 2009. “Critical Chain and Risk Analysis Applied to High-Risk Industry Maintenance: A Case Study.” International Journal of Project Management 27 (4): 419–432. doi: 10.1016/j.ijproman.2008.06.006
   Web of Science ®Google Scholar
• Bevilacqua, M., F. E. Ciarapica, and G. Mazzuto. 2014. “Critical Chain and Theory of Constraints Applied to Yachting Shipbuilding: A Case Study.” International Journal of Project Organisation and Management 6 (4): 379–397. doi: 10.1504/IJPOM.2014.066411
   Google Scholar
• Bhattacharya, A., and P. Vasant. 2007. “Soft-Sensing of Level of Satisfaction in TOC Product-Mix Decision Heuristic Using Robust Fuzzy-LP.” European Journal of Operational Research 177 (1): 55–70. doi:10.1016/j.ejor.2005.11.017.
   Web of Science ®Google Scholar
• Biel, K., and C. H. Glock. 2017. “Governing the Dynamics of Multi-Stage Production Systems Subject to Learning and Forgetting Effects: A Simulation Study.” International Journal of Production Research, 1–23. doi:10.1080/00207543.2017.1338780.
   Web of Science ®Google Scholar
• Blackstone Jr., J. H. 2001. “Theory of Constraints – A Status Report.” International Journal of Production Research 39 (6): 1053–1080. doi:10.1080/00207540010028119.
   Web of Science ®Google Scholar
• Breen, A. M., T. Burton-Houle, and D. C. Aron. 2002. “Applying the Theory of Constraints in Health Care: Part 1—The Philosophy.” Quality Management in Healthcare 10 (3): 40–46. doi: 10.1097/00019514-200210030-00010
   PubMedGoogle Scholar
• Buchmann-Slorup, R. 2014. “Applying Critical Chain Buffer Management Theory in Location-Based Management.” Construction Management and Economics 32 (6): 506–519. doi: 10.1080/01446193.2013.797094
   Google Scholar
• Büdd, C. S., and J. Cerveny. 2010. “A Critical Chain Project Management Primer.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 45–76. New York, NY: McGraw-Hill.
   Google Scholar
• Cao, Z. C., Y. Z. Peng, and Q. D. Wu. 2010. “Re-Entrant Manufacturing System Scheduling Based on Drum-Buffer-Rope.” Computer Integrated Manufacturing Systems 16 (12): 2668–2673.
   Google Scholar
• Cattaneo, C., and G. Bassani. 2016. “The TOC Thinking Process: The Viability of Change.” Human Systems Management 35 (4): 301–323. doi: 10.3233/HSM-161616
   Web of Science ®Google Scholar
• Cerveny, J. F., and S. D. Galup. 2002. “Critical Chain Project Management Holistic Solution Aligning Quantitative and Qualitative Project Management Methods.” Production and Inventory Management Journal 43 (3/4): 55–64.
   Google Scholar
• Chaharsoughi, S., and N. Jafari. 2007. “A Simulated Annealing Approach for Product Mix Decisions.” Scientia Iranica 14 (3): 230–235.
   Web of Science ®Google Scholar
• Chakravorty, S. S., and J. B. Atwater. 2005. “The Impact of Free Goods on the Performance of Drum-Buffer-Rope Scheduling Systems.” International Journal of Production Economics 95 (3): 347–357. doi: 10.1016/j.ijpe.2004.01.001
   Web of Science ®Google Scholar
• Chakravorty, S. S., and D. N. Hales. 2015. “Improving Labour Relations Performance Using a Simplified Drum Buffer Rope (S-DBR) Technique.” Production Planning & Control 27 (2): 02–113.
   Web of Science ®Google Scholar
• Chang, K. H., Y. C. Chang, and Y. S. Chang. 2017. “Applying Theory of Constraints-Based Approach to Solve Memory Allocation of Cloud Storage.” International Journal of Systems Science: Operations & Logistics 4 (4): 311–329.
   Google Scholar
• Chang, Y. C., K. H. Chang, and C. W. Huang. 2014. “Integrate Market Demand Forecast and Demand-Pull Replenishment to Improve the Inventory Management Effectiveness of Wafer Fabrication.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 (4): 617–636. doi: 10.1177/0954405413505556
   Web of Science ®Google Scholar
• Chang, Y. C., K. H. Chang, and Y. C. Lei. 2014. “Probe of the Replenishment Strategy and Grouping Rule in the Semiconductor Industry.” Journal of Testing and Evaluation 42 (2): 484–497. doi: 10.1520/JTE20120146
   Web of Science ®Google Scholar
• Chang, Y. C., K. H. Chang, and W. C. Sun. 2015. “Enhancement of Inventory Management for the Wafer Manufacturing Industry by Combining Market Demand Forecast and Demand-Pull Replenishment.” Journal of Testing and Evaluation 43 (4): 948–963. doi: 10.1520/JTE20130216
   Web of Science ®Google Scholar
• Chang, Y. C., and W. T. Huang. 2011a. “A Modification of Simplified Drum-Buffer-Rope for Re-Entrant Flow Shop Scheduling.” Information Technology Journal 10 (1): 40–50. doi: 10.3923/itj.2011.40.50
   Google Scholar
• Chang, Y. C., and W. T. Huang. 2011b. “Using Simplified Drum-Buffer-Rope for Re-Entrant Flow Shop Scheduling in a Random Environment.” African Journal of Business Management 5 (26).
   Google Scholar
• Chang, Y. C., and W. T. Huang. 2014. “An Enhanced Model for SDBR in a Random Reentrant Flow Shop Environment.” International Journal of Production Research 52 (6): 1808–1826. doi: 10.1080/00207543.2013.848491
   Web of Science ®Google Scholar
• Chaudhari, C. V., and S. K. Mukhopadhyay. 2003. “Application of Theory of Constraints in an Integrated Poultry Industry.” International Journal of Production Research 41 (4): 799–817. doi:10.1080/0020754031000065548.
   Web of Science ®Google Scholar
• Cheng, C. 2010. “Theory of Constraints in Prisons.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 813–841. New York, NY: McGraw-Hill.
   Google Scholar
• Chou, Y. C., C. H. Lu, and Y. Y. Tang. 2012. “Identifying Inventory Problems in the Aerospace Industry Using the Theory of Constraints.” International Journal of Production Research 50 (16): 4686–4698. doi:10.1080/00207543.2011.631598.
   Web of Science ®Google Scholar
• Chu, C. C. 2008. “Buffer Sizing and Critical Chain Project Management.” Computer Integrated Manufacturing Systems, CIMS 14 (5): 1029–1035.
   Google Scholar
• Clegg, B. 2018. “Perceptions of Growth-Impeding Constraints Acting upon SMEs’ Operations and the Identification and use of Transitionary Paths to Elevate Them.” International Journal of Operations and Production Management 38 (3): 756–783. doi:10.1108/IJOPM-12-2015-0736.
   Web of Science ®Google Scholar
• Cohen, O. 2010. “Daily Management with TOC.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 671–727. New York, NY: McGraw-Hill.
   Google Scholar
• Coman, A. 2008. “ARENA Mapping: An Effective Strategy Focusing Tool.” Human Systems Management 27 (4): 305–312.
   Google Scholar
• Coman, A., and B. Ronen. 2000. “Production Outsourcing: A Linear Programming Model for the Theory-of-Constraints.” International Journal of Production Research 38 (7): 1631–1639. doi: 10.1080/002075400188762
   Web of Science ®Google Scholar
• Coman, A., and B. Ronen. 2007. “Managing Strategic and Tactical Constraints in the Hi-Tech Industry.” International Journal of Production Research 45 (4): 779–788. doi: 10.1080/00207540600597237
   Web of Science ®Google Scholar
• Coman, A., and B. Ronen. 2009. “Focused SWOT: Diagnosing Critical Strengths and Weaknesses.” International Journal of Production Research 47 (20): 5677–5689. doi: 10.1080/00207540802146130
   Web of Science ®Google Scholar
• Cooper, M. J., and T. W. Loe. 2000. “Using the Theory of Constraints’ Thinking Processes to Improve Problem-Solving Skills in Marketing.” Journal of Marketing Education 22 (2): 137–146. doi: 10.1177/0273475300222008
   Google Scholar
• Corbett, T. 1999. Throughput Accounting. The North River Press.
   Google Scholar
• Corbett, T. 2000. “Throughput Accounting and Activity-Based Costing: The Driving Factors Behind Each Methodology.” Journal of Cost Management 14 (1): 37–45.
   Google Scholar
• Costa, J. M., H. Rozenfeld, C. S. T. Amaral, R. M. Marcacinit, and S. O. Rezende. 2013. “Systematization of Recurrent New Product Development Management Problems.” Engineering Management Journal 25 (1): 19–34. doi: 10.1080/10429247.2013.11431963
   Web of Science ®Google Scholar
• Cox III, J. F., and L. H. Boyd. 2018. “Using the Theory of Constraints’ Processes of Ongoing Improvement to Address the Provider Appointment Scheduling System Design Problem.” Health Systems. doi:10.1080/20476965.2018.1471439.
   Web of Science ®Google Scholar
• Cox III, J. F., L. H. Boyd, T. T. Sullivan, R. A. Reid, and B. Cartier. 2012. The Theory of Constraints International Certification Organization Dictionary. 2nd ed.
   Google Scholar
• Cox III, J. F., and J. G. Schleier, eds. 2010. Theory of Constraints Handbook. New York, NY: McGraw-Hill.
   Google Scholar
• Dalci, I., and L. Kosan. 2012. “Theory of Constraints Thinking-Process Tools Facilitate Goal Achievement for Hotel Management: A Case Study of Improving Customer Satisfaction.” Journal of Hospitality Marketing & Management 21 (5): 541–568. doi: 10.1080/19368623.2012.626751
   Google Scholar
• Darlington, J., M. Francis, P. Found, and A. Thomas. 2015. “Design and Implementation of a Drum-Buffer-Rope Pull-System.” Production Planning & Control 26 (6): 489–504. doi: 10.1080/09537287.2014.926409
   Web of Science ®Google Scholar
• de Souza, F. B., and H. R. Baptista. 2010. “Proposta de Avanço Para o Método Tambor-Pulmão-Corda Simplificado Aplicado em Ambientes de Produção sob Encomenda.” Gestão & Produção 17 (4): 735–746. doi: 10.1590/S0104-530X2010000400008
   Google Scholar
• de Souza, F. B., and S. R. I. Pires. 2010. “Theory of Constraints Contributions to Outbound Logistics.” Management Research Review 33 (7): 683–700. doi:10.1108/01409171011055780.
   Google Scholar
• de Souza, F. B., and S. R. I. Pires. 2014. “Making to Availability: An Application of the Theory of Constraints in Make-to-Stock Environments.” Gestao e Producao 21 (1): 65–76. doi:10.1590/S0104-530X2013005000007.
   Google Scholar
• de Souza, F. B., V. A. Sobreiro, M. S. Nagano, and J. W. de Souza Manfrinato. 2013. “When Less is Better: Insights from the Product Mix Dilemma from the Theory of Constraints Perspective.” International Journal of Production Research 51 (19): 5839–5852. doi:10.1080/00207543.2013.802052.
   Web of Science ®Google Scholar
• de Souza, M. C., T. A. Souza, and G. L. R. Vaccaro. 2016. “Hospital Bed Management: An Analysis From the Perspective of the Theory of Constraints.” Revista Espacios 37 (30).
   Google Scholar
• Dettmer, H. W. 2007. The Logical Thinking Process: A Systems Approach to Complex Problem Solving. Milwaukee: ASQ Quality Press.
   Google Scholar
• Eden, Y., and B. Ronen. 1991. “The Hourly Rate: Myth and Reality.” Industrial Management 33: 28–30.
   Google Scholar
• Eden, Y., and B. Ronen. 2007. Approximately Right Not Precisely Wrong: Cost Accounting Pricing & Decision Making. The North River Press.
   Google Scholar
• Ehie, I., and C. Sheu. 2005. “Integrating Six Sigma and Theory of Constraints for Continuous Improvement: A Case Study.” Journal of Manufacturing Technology Management 16 (5): 542–553. doi:10.1108/17410380510600518.
   Google Scholar
• Fahimnia, B., J. Sarkis, and H. Davarzani. 2015. “Green Supply Chain Management: A Review and Bibliometric Analysis.” International Journal of Production Economics 162: 101–114. doi:10.1016/j.ijpe.2015.01.003.
   Web of Science ®Google Scholar
• Finch, B. J., and R. L. Luebbe. 2000. “Response to ‘Theory of Constraints and Linear Programming: A Re-Examination’.” International Journal of Production Research 38 (6): 1465–1466. doi:10.1080/002075400188960.
   Web of Science ®Google Scholar
• Fredendall, L. D., and B. R. Lea. 1997. “Improving the Product Mix Heuristic in the Theory of Constraints.” International Journal of Production Research 35 (6): 1535–1544. doi:10.1080/002075497195100.
   Web of Science ®Google Scholar
• Fredendall, L. D., J. W. Patterson, C. Lenhartz, and B. C. Mitchell. 2002. “What Should be Changed?” Quality Progress 35 (1).
   Google Scholar
• Gelders, L. F., and L. N. Van Wassenhove. 1985. “Capacity Planning in MRP, JIT and OPT: A Critique.” Engineering Costs and Production Economics 9 (1-3): 201–209. doi: 10.1016/0167-188X(85)90029-1
   Web of Science ®Google Scholar
• Georgiadis, P., and A. Politou. 2013. “Dynamic Drum-Buffer-Rope Approach for Production Planning and Control in Capacitated Flow-Shop Manufacturing Systems.” Computers and Industrial Engineering 65 (4): 689–703. doi:10.1016/j.cie.2013.04.013.
   Web of Science ®Google Scholar
• Geri, N., and B. Ronen. 2005. “Relevance Lost: The Rise and Fall of Activity-Based Costing.” Human Systems Management 24 (2): 133–144.
   Google Scholar
• Ghorbani, M., S. M. Arabzad, H. Shirouyehzad, and A. Shahin. 2014. “Developing a Logical Model for Cellular Manufacturing Systems by Theory of Constraints Thinking Process Approach.” International Journal of Logistics Systems and Management 18 (2): 270–282. doi: 10.1504/IJLSM.2014.062330
   Google Scholar
• Goldratt, E. M. 1988. “Computerized Shop Floor Scheduling.” International Journal of Production Research 26 (3): 443–455. doi:10.1080/00207548808947875.
   Web of Science ®Google Scholar
• Goldratt, E. M. 1990a. The Haystack Syndrome: Sifting Information Out of the Data Ocean. Croton-on-Hudson, NY: North River Press.
   Google Scholar
• Goldratt, E. M. 1990b. What is This Thing Called Theory of Constraints and how Should it be Implemented? Croton-on-Hudson, NY: North River Press.
   Google Scholar
• Goldratt, E. M. 1994. It’s Not Luck. Great Barrington, MA: North River Press.
   Google Scholar
• Goldratt, E. M. 1997. Critical Chain. Great Barrington, MA: North River Press.
   Google Scholar
• Goldratt, E. M. 2008. The Choice. Great Barrington, MA: North River Press.
   Google Scholar
• Goldratt, E. M. 2010. “Introduction to TOC – My Perspective.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 3–9. New York, NY: McGraw-Hill.
   Google Scholar
• Goldratt, E. M., and J. Cox. 1984. The Goal: Excellence in Manufacturing. Croton-on-Hudson, NY: North River Press.
   Google Scholar
• Goldratt, E. M., I. Eshkoli, and J. Brownleer. 2009 Isn’t It Obvious? Great Barrington, MA: North River Press.
   Google Scholar
• Goldratt, E. M., and R. E. Fox. 1986. The Race. Croton-on-Hudson, NY: North River Press.
   Google Scholar
• Goldratt, E. M., E. Schragenheim, and C. A. Ptak. 2000. Necessary but Not Sufficient. Great Barrington, MA: North River Press.
   Google Scholar
• Goldratt-Ashlag, E. 2010. “The Layers of Resistance: The Buy-In Process According to TOC.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 571–585. New York, NY: McGraw-Hill.
   Google Scholar
• Golmohammadi, D. 2015. “A Study of Scheduling Under the Theory of Constraints.” International Journal of Production Economics 165: 38–50. doi: 10.1016/j.ijpe.2015.03.015
   Web of Science ®Google Scholar
• González, M. O. A., J. S. Gonçalves, and R. M. Vasconcelos. 2017. “Sustainable Development: Case Study in the Implementation of Renewable Energy in Brazil.” Journal of Cleaner Production 142: 461–475. doi: 10.1016/j.jclepro.2016.10.052
   Web of Science ®Google Scholar
• González-Benito, J., G. Lannelongue, and J. A. Alfaro-Tanco. 2013. “Study of Supply-Chain Management in the Automotive Industry: A Bibliometric Analysis.” International Journal of Production Research 51 (13): 3849–3863. doi:10.1080/00207543.2012.752586.
   Web of Science ®Google Scholar
• Groop, J., M. Ketokivi, M. Gupta, and J. Holmström. 2017. “Improving Home Care: Knowledge Creation Through Engagement and Design.” Journal of Operations Management 53-56: 9–22. doi:10.1016/j.jom.2017.11.001.
   Web of Science ®Google Scholar
• Grosfeld-Nir, A., B. Ronen, and N. Kozlovsky. 2007. “The Pareto Managerial Principle: When Does it Apply?” International Journal of Production Research 45 (10): 2317–2325. doi: 10.1080/00207540600818203
   Web of Science ®Google Scholar
• Grünwald, H., P. E. T. Striekwold, and P. J. Weeda. 1989. “A Framework for Quantitative Comparison of Production Control Concepts.” International Journal of Production Research 27 (2): 281–292. doi: 10.1080/00207548908942547
   Web of Science ®Google Scholar
• Gupta, M. 2001. “Activity-Based Throughput Management in a Manufacturing Company.” International Journal of Production Research 39 (6): 1163–1182. doi: 10.1080/00207540010023556
   Web of Science ®Google Scholar
• Gupta, M. 2003. “Constraints Management – Recent Advances and Practices.” International Journal of Production Research 41 (4): 647–659. doi:10.1080/0020754031000065458.
   Web of Science ®Google Scholar
• Gupta, M., and S. Andersen. 2012. “Revisiting Local TOC Measures in an Internal Supply Chain: A Note.” International Journal of Production Research 50 (19): 5363–5371. doi: 10.1080/00207543.2011.627389
   Web of Science ®Google Scholar
• Gupta, M., and S. Andersen. 2018. “Throughput/Inventory Dollar-Days: TOC-Based Measures for Supply Chain Collaboration.” International Journal of Production Research, 1–17. doi:10.1080/00207543.2018.1444805. doi: 10.1080/00207543.2018.1456698
   Web of Science ®Google Scholar
• Gupta, M., S. J. Baxendale, and P. S. Raju. 2002. “Integrating ABM/TOC Approaches for Performance Improvement: A Framework and Application.” International Journal of Production Research 40 (14): 3225–3251. doi: 10.1080/00207540210147016
   Web of Science ®Google Scholar
• Gupta, M., and L. H. Boyd. 2008. “Theory of Constraints: A Theory for Operations Management.” International Journal of Operations and Production Management 28 (10): 991–1012. doi:10.1108/01443570810903122.
   Web of Science ®Google Scholar
• Gupta, M., L. H. Boyd, and F. Kuzmits. 2011. “The Evaporating Cloud: A Tool for Resolving Workplace Conflict.” International Journal of Conflict Management 22 (4): 394–412. doi: 10.1108/10444061111171387
   Web of Science ®Google Scholar
• Gupta, M., L. H. Boyd, and L. Sussman. 2004. “To Better Maps: A TOC Primer for Strategic Planning.” Business Horizons 47 (2): 15–26. doi: 10.1016/j.bushor.2003.10.001
   Google Scholar
• Hall, N. G. 2012. “Project Management: Recent Developments and Research Opportunities.” Journal of Systems Science and Systems Engineering 21 (2): 129–143. doi: 10.1007/s11518-012-5190-5
   Web of Science ®Google Scholar
• Herroelen, W., and R. Leus. 2001. “On the Merits and Pitfalls of Critical Chain Scheduling.” Journal of Operations Management 19 (5): 559–577. doi:10.1016/S0272-6963(01)00054-7.
   Web of Science ®Google Scholar
• Herroelen, W., and R. Leus. 2004. “Robust and Reactive Project Scheduling: A Review and Classification of Procedures.” International Journal of Production Research 42 (8): 1599–1620. doi:10.1080/00207540310001638055.
   Web of Science ®Google Scholar
• Hilmola, O. P., and W. Li. 2016. “Throughput Accounting Heuristics is Still Adequate: Response to Criticism.” Expert Systems with Applications 58: 221–228. doi: 10.1016/j.eswa.2016.03.051
   Web of Science ®Google Scholar
• Hsu, T., and S. Chung. 1998. “The TOC-Based Algorithm for Solving Product Mix Problems.” Production Planning and Control 9 (1): doi:36–46. 10.1080/095372898234505.
   Web of Science ®Google Scholar
• Hu, X., E. Demeulemeester, N. Cui, J. Wang, and W. Tian. 2017. “Improved Critical Chain Buffer Management Framework Considering Resource Costs and Schedule Stability.” Flexible Services and Manufacturing Journal 29 (2): 159–183. doi: 10.1007/s10696-016-9241-y
   Web of Science ®Google Scholar
• Hua, Z. S., S. Coulibaly, and W. Wang. 2006. “TOC & TRIZ Based Product Design Method and its Application.” Computer Integrated Manufacturing Systems-Beijing 12 (6).
   Google Scholar
• Hunink, M. M. 2001. “In Search of Tools to Aid Logical Thinking and Communicating About Medical Decision Making.” Medical Decision Making 21 (4): 267–277. doi: 10.1177/0272989X0102100402
   PubMed Web of Science ®Google Scholar
• Inman, R. A., M. L. Sale, and K. W. Green Jr. 2009. “Analysis of the Relationships Among TOC Use, TOC Outcomes, and Organizational Performance.” International Journal of Operations & Production Management 29 (4): 341–356. doi: 10.1108/01443570910945819
   Web of Science ®Google Scholar
• Irani, Z., A. Gunasekaran, and Y. K. Dwivedi. 2010. “Radio Frequency Identification (RFID): Research Trends and Framework.” International Journal of Production Research 48 (9): 2485–2511. doi:10.1080/00207540903564900.
   Web of Science ®Google Scholar
• Iranmanesh, M., A. K. Siti-Nabiha, and M. Sabbah. 2012. “The Retention of Trained Production Workers in a Small Manufacturing Company in Malaysia.” International Journal of Entrepreneurship and Small Business 16 (1): 71–82. doi: 10.1504/IJESB.2012.046918
   Google Scholar
• Jacobs, F. R. 1984. “OPT Uncovered: Many Production Planning and Scheduling Concepts Can be Applied with or Without the Software.” Industrial Engineering 16 (10).
   Google Scholar
• Jiang, X., H. Wu, T. Tsai, and H. Hu. 2013. “Diverse Replenishment Frequency Model for TOC Supply Chain Replenishment Systems with Capacity Constraints.” International Journal of Modelling, Identification and Control 19 (3): 248–256. doi: 10.1504/IJMIC.2013.055430
   Google Scholar
• Kania, E., G. Housden, and K. Hitchner. 2002. “The Theory of Constraints: A Unique Alternative to Traditional Project Management.” Drug Information Journal 36 (3): 611–621. doi: 10.1177/009286150203600315
   Google Scholar
• Kee, R., and C. Schmidt. 2000. “A Comparative Analysis of Utilizing Activity-Based Costing and the Theory of Constraints for Making Product-Mix Decisions.” International Journal of Production Economics 63 (1): 1–17. doi: 10.1016/S0925-5273(99)00005-5
   Web of Science ®Google Scholar
• Kim, S., J. F. Cox, and V. J. Mabin. 2010. “An Exploratory Study of Protective Inventory in a Re-Entrant Line with Protective Capacity.” International Journal of Production Research 48 (14): 4153–4178. doi:10.1080/00207540902991666.
   Web of Science ®Google Scholar
• Kim, S., V. J. Mabin, and J. Davies. 2008. “The Theory of Constraints Thinking Processes: Retrospect and Prospect.” International Journal of Operations and Production Management 28 (2): 155–184. doi:10.1108/01443570810846883.
   Web of Science ®Google Scholar
• Kishira, Y. 2006. “A Case Study of Reengineering Public Works Management at a Japanese Government Ministry.” PM World Today 8 (11).
   Google Scholar
• Kishira, Y. 2009a. Transformation Management by Harmony. Great Barrington: North River Press.
   Google Scholar
• Kishira, Y. 2009b. Win-Win-Win Public Work Management Transformation. http://www.sanpouyoshi.jp/conf2009/pdf/conf2009-kishira.pdf.
   Google Scholar
• Klimentova, S., and T. Hirtz. 2012. “A Deep Diagnosis of Causes of Problems in Public Administration Based on the Theory of Constraints.” International Journal of Knowledge, Culture and Change Management.
   Google Scholar
• Kuo, T. C., S. H. Chang, and S. N. Huang. 2009. “Due-Date Performance Improvement Using TOC’s Aggregated Time Buffer Method at a Wafer Fabrication Factory.” Expert Systems with Applications 36 (2): 1783–1792. doi: 10.1016/j.eswa.2007.12.038
   Web of Science ®Google Scholar
• Lacerda, D. P., R. A. Cassel, and L. H. Rodrigues. 2010. “Service Process Analysis Using Process Engineering and the Theory of Constraints Thinking Process.” Business Process Management Journal 16 (2): 264–281. doi: 10.1108/14637151011035598
   Google Scholar
• Lang, L. 2010. “Mafia Offers: Dealing with a Market Constraint.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 603–628. New York, NY: McGraw-Hill.
   Google Scholar
• Leach, L. P. 1999. “Critical Chain Project Management Improves Project Performance.” Project Management Journal 30 (2): 39–51. doi: 10.1177/875697289903000207
   Google Scholar
• Lechler, T. G., B. Ronen, and E. A. Stohr. 2005. “Critical Chain: A New Project Management Paradigm or Old Wine in New Bottles?” EMJ – Engineering Management Journal 17 (4): 45–58. doi:10.1080/10429247.2005.11431672.
   Google Scholar
• Lee, J., J. Chang, C. Tsai, and R. Li. 2010. “Research on Enhancement of TOC Simplified Drum-Buffer-Rope System Using Novel Generic Procedures.” Expert Systems with Applications 37 (5): 3747–3754. doi:10.1016/j.eswa.2009.11.049.
   Web of Science ®Google Scholar
• Lee, T., and G. Plenert. 1996. “Maximizing Product Mix Profitability-What’s the Best Analysis Tool.” Production Planning & Control 7 (6): 547–553. doi: 10.1080/09537289608930388
   Web of Science ®Google Scholar
• Lee, H., and D. W. Seo. 2016. “Performance Evaluation of WIP-Controlled Line Production Systems with Constant Processing Times.” Computers & Industrial Engineering 94: 138–146. doi: 10.1016/j.cie.2016.02.006
   Web of Science ®Google Scholar
• Leshno, M., and B. Ronen. 2001. “The Complete Kit Concept–Implementation in the Health Care System.” Human Systems Management 20 (4): 313–318.
   Google Scholar
• Librelato, T. P., D. P. Lacerda, L. H. Rodrigues, and D. R. Veit. 2014. “A Process Improvement Approach Based on the Value Stream Mapping and the Theory of Constraints Thinking Process.” Business Process Management Journal 20 (6): 922–949. doi: 10.1108/BPMJ-07-2013-0098
   Google Scholar
• Linhares, A. 2009. “Theory of Constraints and the Combinatorial Complexity of the Product-Mix Decision.” International Journal of Production Economics 121 (1): 121–129. doi: 10.1016/j.ijpe.2009.04.023
   Web of Science ®Google Scholar
• Liu, S. X., J. H. Song, and J. F. Tang. 2006. “Critical Chain Based Approach for Resource-Constrained Project Scheduling.” Acta Automatica Sinica 32 (1): 60–66.
   Google Scholar
• Liu, X., R. Tan, and L. Yao. 2008. “Application Research on Integrated Process Model for the Conceptual Design of Product Innovation.” Chinese Journal of Mechanical Engineering 44 (9): 154–162. doi: 10.3901/JME.2008.09.154
   Google Scholar
• Long, L. D., and A. Ohsato. 2008. “Fuzzy Critical Chain Method for Project Scheduling Under Resource Constraints and Uncertainty.” International Journal of Project Management 26 (6): 688–698. doi:10.1016/j.ijproman.2007.09.012.
   Google Scholar
• Lowalekar, H., and R. R. Ravi. 2017. “Revolutionizing Blood Bank Inventory Management Using the TOC Thinking Process: An Indian Case Study.” International Journal of Production Economics 186: 89–122. doi: 10.1016/j.ijpe.2017.02.003
   Web of Science ®Google Scholar
• Luebbe, R., and B. Finch. 1992. “Theory of Constraints and Linear Programming: A Comparison.” International Journal of Production Research 30 (6): 1471–1478. doi:10.1080/00207549208942967.
   Web of Science ®Google Scholar
• Lundrigan, R. 1986. “What is this Thing Called OPT?” Production and Inventory Management Washington, D.C. 27 (2): 2–12.
   Google Scholar
• Mabin, V. J., and S. J. Balderstone. 1999. The World of the Theory of Constraints: A Review of the International Literature. CRC Press.
   Google Scholar
• Mabin, V. J., and S. J. Balderstone. 2003. “The Performance of the Theory of Constraints Methodology: Analysis and Discussion of Successful TOC Applications.” International Journal of Operations and Production Management 23 (5-6): 568–595. doi:10.1108/01443570310476636.
   Web of Science ®Google Scholar
• Mabin, V. J., and J. Davies. 2003. “Framework for Understanding the Complementary Nature of TOC Frames: Insights from the Product Mix Dilemma.” International Journal of Production Research 41 (4): 661–680. doi:10.1080/0020754031000065467.
   Web of Science ®Google Scholar
• Manikas, A., M. Gupta, and L. H. Boyd. 2015. “Experiential Exercises with Four Production Planning and Control Systems.” International Journal of Production Research 53 (14): 4206–4217. doi:10.1080/00207543.2014.985393.
   Web of Science ®Google Scholar
• Meleton Jr, M. P. 1986. “OPT – Fantasy or Breakthrough?” Production and Inventory Management Washington, D.C. 27 (2): 13–21.
   Google Scholar
• Mishra, N., M. K. Tiwari, R. Shankar, and F. T. Chan. 2005. “Hybrid Tabu-Simulated Annealing Based Approach to Solve Multi-Constraint Product Mix Decision Problem.” Expert Systems with Applications 29 (2): 446–454. doi: 10.1016/j.eswa.2005.04.044
   Web of Science ®Google Scholar
• Moily, J. P. 2015. “Economic Manufacturing Quantity and its Integrating Implications.” Production and Operations Management 24 (11): 1696–1705. doi: 10.1111/poms.12411
   Web of Science ®Google Scholar
• Naor, M., E. S. Bernardes, and A. Coman. 2013. “Theory of Constraints: Is it a Theory and a Good one?” International Journal of Production Research 51 (2): 542–554. doi: 10.1080/00207543.2011.654137
   Web of Science ®Google Scholar
• Nazari-Shirkouhi, S., H. Eivazy, R. Ghodsi, K. Rezaie, and E. Atashpaz-Gargari. 2010. “Solving the Integrated Product Mix-Outsourcing Problem Using the Imperialist Competitive Algorithm.” Expert Systems with Applications 37 (12): 7615–7626. doi:10.1016/j.eswa.2010.04.081.
   Web of Science ®Google Scholar
• Neely, A. D., and M. D. Byrne. 1992. “A Simulation Study of Bottleneck Scheduling.” International Journal of Production Economics 26 (1-3): 187–192. doi:10.1016/0925-5273(92)90062-C.
   Web of Science ®Google Scholar
• Niv, M. B., Z. Lieber, and B. Ronen. 2010. “Focused Management in a Court System: Doing More with the Existing Resources.” Human Systems Management 29 (4): 265–277. doi:10.3233/HSM-2010-0731.
   Google Scholar
• Onwubolu, G. C. 2001. “Tabu Search-Based Algorithm for the TOC Product Mix Decision.” International Journal of Production Research 39 (10): 2065–2076. doi:10.1080/00207540010005736.
   Web of Science ®Google Scholar
• Panizzolo, R. 2016. “Theory of Constraints (TOC) Production and Manufacturing Performance.” International Journal of Industrial Engineering and Management 7 (1): 15–23.
   Google Scholar
• Patterson, M. C. 1992. “The Product-Mix Decision: A Comparison of Theory of Constraints and Labor-Based Management Accounting.” Production and Inventory Management Journal 33 (3).
   Google Scholar
• Patwardhan, M. B., A. Sarría-Santamera, and D. B. Matchar. 2006. “Improving the Process of Developing Technical Reports for Health Care Decision-Makers: Using the Theory of Constraints in the Evidence-Based Practice Centers.” International Journal of Technology Assessment in Health Care 22 (1): 26–32. doi: 10.1017/S026646230605080X
   PubMed Web of Science ®Google Scholar
• Pérez, J. L. 1997. “TOC for World Class Global Supply Chain Management.” Computers and Industrial Engineering 33 (1-2): 289–293. doi: 10.1016/S0360-8352(97)00095-8
   Web of Science ®Google Scholar
• Plenert, G. 1993. “Optimizing Theory of Constraints When Multiple Constrained Resources Exist.” European Journal of Operational Research 70 (1): 126–133. doi:10.1016/0377-2217(93)90237-H.
   Web of Science ®Google Scholar
• Plenert, G. 1999. “Focusing Material Requirements Planning (MRP) Towards Performance.” European Journal of Operational Research 119 (1): 91–99. doi:10.1016/S0377-2217(98)00339-7.
   Web of Science ®Google Scholar
• Plenert, G., and T. D. Best. 1986. “MRP, JIT, and OPT: What’s ‘Best’?” Production and Inventory Management Washington, D.C. 27 (2): 22–29.
   Google Scholar
• Ponte, B., J. Costas, J. Puche, D. De la Fuente, and R. Pino. 2016. “Holism Versus Reductionism in Supply Chain Management: An Economic Analysis.” Decision Support Systems 86: 83–94. doi: 10.1016/j.dss.2016.03.010
   Web of Science ®Google Scholar
• Pretorius, P. 2014. “Introducing in-Between Decision Points to TOCs Five Focusing Steps.” International Journal of Production Research 52 (2): 496–506. doi:10.1080/00207543.2013.836612.
   Web of Science ®Google Scholar
• Rahman, S. 1998. “Theory of Constraints: A Review of the Philosophy and its Applications.” International Journal of Operations and Production Management 18 (4): 336–355. doi:10.1108/01443579810199720.
   Web of Science ®Google Scholar
• Rahman, S. 2002. “The Theory of Constraints’ Thinking Process Approach to Developing Strategies in Supply Chains.” International Journal of Physical Distribution & Logistics Management 32 (10): 809–828. doi:10.1108/09600030210455429.
   Google Scholar
• Rand, G. K. 2000. “Critical Chain: The Theory of Constraints Applied to Project Management.” International Journal of Project Management 18 (3): 173–177. doi: 10.1016/S0263-7863(99)00019-8
   Google Scholar
• Ray, A., B. Sarkar, and S. Sanyal. 2011. “An Exploratory Analysis of Optimizing Product Mix Through Heuristic: an Eclectic Decision.” International Journal of Industrial Engineering 18 (9).
   Google Scholar
• Raz, T., R. Barnes, and D. Dvir. 2003. “A Critical Look at Critical Chain Project Management.” Project Management Journal 34 (4): 24–32. doi: 10.1177/875697280303400404
   Google Scholar
• Reid, R. A. 2006. “Productivity and Quality Improvement: An Implementation Framework.” International Journal of Productivity and Quality Management 1 (1-2): 26–36. doi: 10.1504/IJPQM.2006.008371
   Google Scholar
• Reid, R. A., and J. R. Cormier. 2003. “Applying the TOC TP: A Case Study in the Service Sector.” Managing Service Quality: An International Journal 13 (5): 349–369. doi: 10.1108/09604520310495831
   Google Scholar
• Reid, R. A., and T. E. Shoemaker. 2006. “Using the Theory of Constraints to Focus Organizational Improvement Efforts: Part 1-Defining the Problem.” American Water Works Association. Journal 98 (7). doi: 10.1002/j.1551-8833.2006.tb07711.x
   Web of Science ®Google Scholar
• Rogalska, M., and Z. Hejducki. 2007. “Time Buffers in Construction Process Scheduling.” Journal of Civil Engineering and Management 13 (2): 143–148.
   Google Scholar
• Ronen, B., A. Coman, and E. Schragenheim. 2001. “Peak Management.” International Journal of Production Research 39 (14): 3183–3193. doi: 10.1080/00207540110054588
   Web of Science ®Google Scholar
• Ronen, B., R. Gur, and S. Pass. 1994. “Focused Management in Military Organizations: An Avenue for Future Industrial Engineering.” Computers & Industrial Engineering 27 (1-4): 543–544. doi: 10.1016/0360-8352(94)90354-9
   Web of Science ®Google Scholar
• Ronen, B., T. G. Lechler, and E. A. Stohr. 2012. “The 25/25 Rule: Achieving More by Doing Less.” International Journal of Production Research 50 (24): 7126–7133. doi: 10.1080/00207543.2011.636387
   Web of Science ®Google Scholar
• Ronen, B., and Y. Spector. 1992. “Managing System Constraints: A Cost/Utilization Approach.” International Journal of Production Research 30 (9): 2045–2061. doi: 10.1080/00207549208948137
   Web of Science ®Google Scholar
• Ronen, B., and M. K. Starr. 1990. “Synchronized Manufacturing as in OPT: From Practice to Theory.” Computers and Industrial Engineering 18 (4): 585–600. doi:10.1016/0360-8352(90)90017-G.
   Web of Science ®Google Scholar
• Rossi Filho, T. A., D. A. J. Pacheco, I. Pergher, J. A. V. Antunes, G. L. R. Vaccaro, and D. F. da Luz. 2013. “A Reference Approach to Deploy the Solution of Logistics Theory of Constraints.” Espacios 34 (7).
   Google Scholar
• Rossi Filho, T. A., D. A. J. Pacheco, I. Pergher, G. L. R. Vaccaro, and J. A. V. Antunes. 2016. “A New Approach for Decision Making in Distribution Supply Chains: A Theory of Constraints Perspective.” International Journal of Logistics Systems and Management 25 (2): 266–282. doi:10.1504/IJLSM.2016.078916.
   Google Scholar
• Russell, G. R., and T. D. Fry. 1997. “Order Review/Release and Lot Splitting in Drum-Buffer-Rope.” International Journal of Production Research 35 (3): 827–845. doi:10.1080/002075497195731.
   Web of Science ®Google Scholar
• Sahi, G., M. Gupta, and P. C. Patel. 2017. “A Measure of Throughput Orientation: Scale Development and Nomological Validation.” Decision Sciences 48 (3): 420–453. doi:10.1111/deci.12227.
   Web of Science ®Google Scholar
• Sanjika, T. M., and C. N. Bezuidenhout. 2016. “A Primary Influence Vertex Approach to Identify Driving Factors in Complex Integrated Agri-Industrial Systems – an Example from Sugarcane Supply and Processing Systems.” International Journal of Production Research 54 (15): 4506–4519. doi:10.1080/00207543.2015.1064552.
   Web of Science ®Google Scholar
• Scheinkopf, L. 2010. “Thinking Process Including S&T Trees.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 729–786. New York, NY: McGraw-Hill.
   Google Scholar
• Schragenheim, E. 2010a. “Managing Make-to-Stock and the Concept of Make-to-Availability.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 239–264. New York, NY: McGraw-Hill.
   Google Scholar
• Schragenheim, A. 2010b. “Supply Chain Management.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 265–302. New York, NY: McGraw-Hill.
   Google Scholar
• Schragenheim, E. 2012. “Developing the Process for Top Level Decision Making.” Annals of 10th TOCICO International Conference. http://c.ymcdn.com/sites/www.tocico.org/resource/resmgr/2012_foundation_pdfs/schragenheim,_eli_final_5-23.pdf.
   Google Scholar
• Schragenheim, E., and H. W. Dettmer. 2001. Manufacturing at Warp Speed. Boca Raton: St. Lucie Press.
   Google Scholar
• Schragenheim, E., H. W. Dettmer, and J. W. Patterson. 2009. Supply Chain Management at Warp Speed: Integrating the System From End to End. CRC Press.
   Google Scholar
• Schragenheim, E., and B. Ronen. 1990. “Drum-Buffer-Rope Shop Floor Control.” Production and Inventory Management Washington, D.C. 31 (3): 18–22.
   Google Scholar
• Schragenheim, E., A. Weisenstern, and A. Schragenheim. 2006. “What’s Really New in Simplified DBR.” Annals of Theory of Constraints International Certification Organization – TOCICO.
   Google Scholar
• Shoemaker, T. E., and R. A. Reid. 2005. “Applying the TOC Thinking Process: A Case Study in the Government Sector.” Human Systems Management 24 (1): 21–37.
   Google Scholar
• Simatupang, T. M., A. C. Wright, and R. Sridharan. 2004. “Applying the Theory of Constraints to Supply Chain Collaboration.” Supply Chain Management: An International Journal 9 (1): 57–70. doi:10.1108/13598540410517584.
   Web of Science ®Google Scholar
• Sobreiro, V. A., and M. S. Nagano. 2012. “A Review and Evaluation on Constructive Heuristics to Optimise Product Mix Based on the Theory of Constraints.” International Journal of Production Research 50 (20): 5936–5948. doi:10.1080/00207543.2011.638940.
   Web of Science ®Google Scholar
• Sokolov, A. Y., and T. V. Elsukova. 2016. “Using Abc to Enhance Throughput Accounting: An Integrated Management Approach.” Academy of Strategic Management Journal 15 (Special Issue 4): 8–15.
   Google Scholar
• Sommer, K. A., and V. J. Mabin. 2016. “Insights Into the Eldercare Conundrum Through Complementary Lenses of Boardman’s SSM and TOC’s Evaporating Cloud.” European Journal of Operational Research 248 (1): 286–300. doi: 10.1016/j.ejor.2015.06.033
   Web of Science ®Google Scholar
• Souren, R., H. Ahn, and C. Schmitz. 2005. “Optimal Product Mix Decisions Based on the Theory of Constraints? Exposing Rarely Emphasized Premises of Throughput Accounting.” International Journal of Production Research 43 (2): 361–374. doi:10.1080/0020754042000273040.
   Web of Science ®Google Scholar
• Spector, Y. 2011. “Theory of Constraint Methodology Where the Constraint is the Business Model.” International Journal of Production Research 49 (11): 3387–3394. doi: 10.1080/00207541003801283
   Web of Science ®Google Scholar
• Spencer, M. S., and J. F. Cox. 1995. “Optimum Production Technology (OPT) and the Theory of Constraints (TOC): Analysis and Genealogy.” International Journal of Production Research 33 (6): 1495–1504. doi:10.1080/00207549508930224.
   Web of Science ®Google Scholar
• Stevenson, M., L. C. Hendry, and B. G. Kingsman. 2005. “A Review of Production Planning and Control: The Applicability of Key Concepts to the Make-to-Order Industry.” International Journal of Production Research 43 (5): 869–898. doi:10.1080/0020754042000298520.
   Web of Science ®Google Scholar
• Steyn, H. 2001. “An Investigation Into the Fundamentals of Critical Chain Project Scheduling.” International Journal of Project Management 19 (6): 363–369. doi: 10.1016/S0263-7863(00)00026-0
   Google Scholar
• Steyn, H. 2002. “Project Management Applications of the Theory of Constraints Beyond Critical Chain Scheduling.” International Journal of Project Management 20 (1): 75–80. doi: 10.1016/S0263-7863(00)00054-5
   Google Scholar
• Suerken, K. 2010. “Theory of Constraints for Education.” In Theory of Constraints Handbook, edited by J. F. Cox III, and J. G. Schleier, 787–812. New York, NY: McGraw-Hill.
   Google Scholar
• Sun, R., and K. Leng. 2013. “Inventory Control Policy for E-Tail Organizations Based on TOC.” Information Technology Journal 12 (24): 8171–8175. doi:10.3923/itj.2013.8171.8175.
   Google Scholar
• Taticchi, P., P. Garengo, S. S. Nudurupati, F. Tonelli, and R. Pasqualino. 2015. “A Review of Decision-Support Tools and Performance Measurement and Sustainable Supply Chain Management.” International Journal of Production Research 53 (21): 6473–6494. doi:10.1080/00207543.2014.939239.
   Web of Science ®Google Scholar
• Taylor III, L. J., B. Murphy, and W. Price. 2006. “Goldratt’s Thinking Process Applied to Employee Retention.” Business Process Management Journal 12 (5): 646–670. doi: 10.1108/14637150610691055
   Google Scholar
• Taylor III, L. J., and I. Poyner. 2008. “Goldratt’s Thinking Process Applied to the Problems Associated with Trained Employee Retention in a Highly Competitive Labor Market.” Journal of European Industrial Training 32 (7): 594–608. doi: 10.1108/03090590810899847
   Google Scholar
• Taylor III, L. J., and D. Sheffield. 2002. “Goldratt’s Thinking Process Applied to Medical Claims Processing.” Hospital Topics 80 (4): 13–21. doi: 10.1080/00185860209598005
   PubMedGoogle Scholar
• Thürer, M., and M. Stevenson. 2017. “On the Beat of the Drum: Improving the Flow Shop Performance of the Drum–Buffer–Rope Scheduling Mechanism.” International Journal of Production Research 56 (9): 3294–3305. doi:10.1080/00207543.2017.1401245.
   Web of Science ®Google Scholar
• Thürer, M., M. Stevenson, C. Silva, and T. Qu. 2017. “Drum-buffer-rope and Workload Control in High-Variety Flow and Job Shops with Bottlenecks: An Assessment by Simulation.” International Journal of Production Economics 188: 116–127. doi: 10.1016/j.ijpe.2017.03.025
   Web of Science ®Google Scholar
• Tollington, T., and P. Wachter. 2001. “ABC/TA for Internet Retail Shopping.” International Journal of Retail & Distribution Management 29 (4): 149–155. doi: 10.1108/09590550110387944
   Google Scholar
• Tsai, W. H., J. C. Chang, C. L. Hsieh, T. S. Tsaur, and C. W. Wang. 2016. “Sustainability Concept in Decision-Making: Carbon Tax Consideration for Joint Product Mix Decision.” Sustainability 8 (12).
   PubMed Web of Science ®Google Scholar
• Tsai, W. H., H. C. Chen, J. D. Leu, Y. C. Chang, and T. W. Lin. 2013. “A Product-Mix Decision Model Using Green Manufacturing Technologies Under Activity-Based Costing.” Journal of Cleaner Production 57: 178–187. doi: 10.1016/j.jclepro.2013.04.011
   Web of Science ®Google Scholar
• Tsai, W. H., L. Kuo, T. W. Lin, Y. C. Kuo, and Y. S. Shen. 2010. “Price Elasticity of Demand and Capacity Expansion Features in an Enhanced ABC Product-Mix Decision Model.” International Journal of Production Research 48 (21): 6387–6416. doi: 10.1080/00207540903289763
   Web of Science ®Google Scholar
• Tsai, W. H., C. W. Lai, L. J. Tseng, and W. C. Chou. 2008. “Embedding Management Discretionary Power Into an ABC Model for a Joint Products Mix Decision.” International Journal of Production Economics 115 (1): 210–220. doi:10.1016/j.ijpe.2008.05.013.
   Web of Science ®Google Scholar
• Tsou, C. M. 2013. “On the Strategy of Supply Chain Collaboration Based on Dynamic Inventory Target Level Management: A Theory of Constraint Perspective.” Applied Mathematical Modelling 37 (7): 5204–5214. doi: 10.1016/j.apm.2012.10.031
   Web of Science ®Google Scholar
• Tukel, O. I., W. O. Rom, and S. D. Eksioglu. 2006. “An Investigation of Buffer Sizing Techniques in Critical Chain Scheduling.” European Journal of Operational Research 172 (2): 401–416. doi: 10.1016/j.ejor.2004.10.019
   Web of Science ®Google Scholar
• Umble, M., and E. Umble. 2000. “Manage Your Projects for Success: An Application of the Theory of Constraints.” Production and Inventory Management Journal 41 (2).
   Google Scholar
• Umble, M., and E. Umble. 2006. “Utilizing Buffer Management to Improve Performance in a Healthcare Environment.” European Journal of Operational Research 174 (2): 1060–1075. doi: 10.1016/j.ejor.2005.02.059
   Web of Science ®Google Scholar
• van Eck, N. J., and L. Waltman. 2010. “Software Survey: VOSviewer, a Computer Program for Bibliometric Mapping.” Scientometrics 84 (2): 523–538. doi:10.1007/s11192-009-0146-3.
   PubMed Web of Science ®Google Scholar
• van Eck, N. J., and L. Waltman. 2014. “Visualizing Bibliometric Networks.” In Measuring Scholarly Impact: Methods and Practice, edited by Y. Ding, R. Rousseau, and D. Wolfram, 285–320. Springer.
   Google Scholar
• van Eck, N. J., and L. Waltman. 2016. Vosviewer Manual: Manual for VOSviewer Version 1.6.5. CWTS, Universiteit Leiden.
   Google Scholar
• van Eck, N. J., and L. Waltman. 2017. “Citation-Based Clustering of Publications Using CitNetExplorer and VOSviewer.” Scientometrics 111 (2): 1053–1070. doi:10.1007/s11192-017-2300-7.
   PubMed Web of Science ®Google Scholar
• Wang, L. C., C. Y. Cheng, Y. T. Tseng, and Y. F. Liu. 2015. “Demand-Pull Replenishment Model for Hospital Inventory Management: A Dynamic Buffer-Adjustment Approach.” International Journal of Production Research 53 (24): 7533–7546. doi:10.1080/00207543.2015.1102353.
   Web of Science ®Google Scholar
• Wang, J. Q., S. D. Sun, G. G. Niu, and Y. N. Zhai. 2011. “Capacity-Constrained Product Mix Optimization Based on Theory of Constraints and Immune Algorithm.” Computer Integrated Manufacturing Systems 17 (6): 1247–1256.
   Google Scholar
• Wang, W. X., X. Wang, X. L. Ge, and L. Deng. 2014. “Multi-Objective Optimization Model for Multi-Project Scheduling on Critical Chain.” Advances in Engineering Software 68: 33–39. doi: 10.1016/j.advengsoft.2013.11.004
   Web of Science ®Google Scholar
• Watson, K. J., J. H. Blackstone, and S. C. Gardiner. 2007. “The Evolution of a Management Philosophy: The Theory of Constraints.” Journal of Operations Management 25 (2): 387–402. doi:10.1016/j.jom.2006.04.004.
   Web of Science ®Google Scholar
• Watson, K. J., and T. Polito. 2003. “Comparison of DRP and TOC Financial Performance Within a Multi-Product, Multi-Echelon Physical Distribution Environment.” International Journal of Production Research 41 (4): 741–765. doi:10.1080/0020754031000065511.
   Web of Science ®Google Scholar
• Wei, Z., X. Song, and D. Wang. 2017. “Manufacturing Flexibility, Business Model Design, and Firm Performance.” International Journal of Production Economics 193: 87–97. doi:10.1016/j.ijpe.2017.07.004.
   Web of Science ®Google Scholar
• Wu, H. H., H. H. Huang, and W. T. Jen. 2012. “A Study of the Elongated Replenishment Frequency of TOC Supply Chain Replenishment Systems in Plants.” International Journal of Production Research 50 (19): 5567–5581. doi:10.1080/00207543.2011.649803.
   Web of Science ®Google Scholar
• Wu, H. H., A. H. Lee, and T. P. Tsai. 2014. “A Two-Level Replenishment Frequency Model for TOC Supply Chain Replenishment Systems Under Capacity Constraint.” Computers & Industrial Engineering 72: 152–159. doi: 10.1016/j.cie.2014.03.006
   Web of Science ®Google Scholar
• Wu, S., J. S. Morris, and T. M. Gordon. 1994. “A Simulation Analysis of the Effectiveness of Drum-Buffer-Rope Scheduling in Furniture Manufacturing.” Computers and Industrial Engineering 26 (4): 757–764. doi:10.1016/0360-8352(94)90010-8.
   Web of Science ®Google Scholar
• Yan, L., B. Jinsong, H. Xiaofeng, and J. Ye. 2009. “A Heuristic Project Scheduling Approach for Quick Response to Maritime Disaster Rescue.” International Journal of Project Management 27 (6): 620–628. doi: 10.1016/j.ijproman.2008.10.001
   Web of Science ®Google Scholar
• Yang, S., and L. Fu. 2014. “Critical Chain and Evidence Reasoning Applied to Multi-Project Resource Schedule in Automobile R&D Process.” International Journal of Project Management 32 (1): 166–177. doi: 10.1016/j.ijproman.2013.01.010
   Web of Science ®Google Scholar
• Yeo, K. T., and J. H. Ning. 2002. “Integrating Supply Chain and Critical Chain Concepts in Engineer-Procure-Construct (EPC) Projects.” International Journal of Project Management 20 (4): 253–262. doi:10.1016/S0263-7863(01)00021-7.
   Google Scholar
• Yuan, K. J., S. H. Chang, and R. K. Li. 2003. “Enhancement of Theory of Constraints Replenishment Using a Novel Generic Buffer Management Procedure.” International Journal of Production Research 41 (4): 725–740. doi: 10.1080/0020754031000065502
   Web of Science ®Google Scholar
• Zegordi, S. H., K. Itoh, T. Enkawa, and S. L. Chung. 1995. “Simulated Annealing Scheme Incorporating Move Desirability Table for Solution of Facility Layout Problems.” Journal of the Operations Research Society of Japan 38 (1): 1–20. doi: 10.15807/jorsj.38.1
   Google Scholar
• Zhang, J., S. Jia, and E. Díaz. 2015. “A New Buffer Sizing Approach Based on the Uncertainty of Project Activities.” Concurrent Engineering 23 (1): 3–12. doi: 10.1177/1063293X14561871
   Web of Science ®Google Scholar
• Zhang, J., X. Song, H. Chen, and R. Shi. 2015. “Optimisation of Critical Chain Sequencing Based on Activities Information Flow Interactions.” International Journal of Production Research 53 (20): 6231–6241. doi:10.1080/00207543.2015.1043157.
   Web of Science ®Google Scholar
• Zhang, J., X. Song, H. Chen, and R. Shi. 2016. “Determination of Critical Chain Project Buffer Based on Information Flow Interactions.” Journal of the Operational Research Society 67 (9): 1146–1157. doi: 10.1057/jors.2016.9
   Web of Science ®Google Scholar
• Zhang, J., X. Song, and E. Díaz. 2014. “Buffer Sizing of Critical Chain Based on Attribute Optimization.” Concurrent Engineering 22 (3): 253–264. doi: 10.1177/1063293X14541286
   Web of Science ®Google Scholar
• Zhang, J., X. Song, and E. Díaz. 2016. “Project Buffer Sizing of a Critical Chain Based on Comprehensive Resource Tightness.” European Journal of Operational Research 248 (1): 174–182. doi: 10.1016/j.ejor.2015.07.009
   Web of Science ®Google Scholar
• Zhang, J., X. Song, and E. Díaz. 2017. “Critical Chain Project Buffer Sizing Based on Resource Constraints.” International Journal of Production Research 55 (3): 671–683. doi:10.1080/00207543.2016.1200151.
   Web of Science ®Google Scholar
• Zheng, Z., Z. Guo, Y. Zhu, and X. Zhang. 2014. “A Critical Chains Based Distributed Multi-Project Scheduling Approach.” Neurocomputing 143: 282–293. doi: 10.1016/j.neucom.2014.04.056
   Web of Science ®Google Scholar
• Zhuang, Z. Y., and S. C. Chang. 2017. “Deciding Product Mix Based on Time-Driven Activity-Based Costing by Mixed Integer Programming.” Journal of Intelligent Manufacturing 28 (4): 959–974. doi: 10.1007/s10845-014-1032-2
   Web of Science ®Google Scholar
• Zultner, R. E. 1999. “Project Estimation with Critical Chain: Third-Generation Risk Management.” Cutter IT Journal 12 (7): 4–12.
   Google Scholar
• Zupancic, D., B. Buchmeister, and T. Aljaz. 2017. “Reducing the Time of Task Execution with Existing Resources – Comparison of Approaches.” International Journal of Simulation Modelling 16 (3): 484–496. doi:10.2507/IJSIMM16(3)10.394.
   Web of Science ®Google Scholar