The influence of additive manufacturing on the configuration of make-to-order spare parts supply chain under heterogeneous demand

References

• Abbink, R. A. J. A. 2015. “The Impact of Additive Manufacturing on Service Supply Chains.” Master diss., Eindhoven University of Technology.
   Google Scholar
• Allen, J. 2006. “An Investigation into the Comparative Costs of Additive Manufacture vs. Machine from Solid for Aero Engine Parts.” Rolls-Royce PLC Derby (United Kingdom).
   Google Scholar
• Allen, J. 2011. “The Potential for Aero Engine Component Manufacture Using Additive Layer Manufacturing.” Aerodays Conference, Madrid.
   Google Scholar
• Andersson, J., and J. Marklund. 2000. “Decentralized Inventory Control in a Two-level Distribution System.” European Journal of Operational Research 127 (3): 483–506. doi: 10.1016/S0377-2217(99)00332-X
   Web of Science ®Google Scholar
• Angerhofer, B. J., and M. C. Angelides. 2000. “System Dynamics Modelling in Supply Chain Management: Research Review.” Proceedings of the 2000 Winter Simulation Conference, Vol. 1, 342–351.
   Google Scholar
• Ashour Pour, M., S. Zanoni, A. Bacchetti, M. Zanardini, and M. Perona. 2017. “Additive Manufacturing Impacts on a Two-level Supply Chain.” International Journal of Systems Science: Operations & Logistics. doi:10.1080/23302674.2017.1340985.
   Google Scholar
• ASTM. 2012. F2792-12a: Standard Terminology for Additive Manufacturing Technologies. American Society for Testing and Materials (ASTM). https://www.astm.org/Standards/F2792.htm.
   Google Scholar
• Atzeni, E., and A. Salmi. 2012. “Economics of Additive Manufacturing for End-usable Metal Parts.” International Journal of Advanced Manufacturing Technology 62 (9): 1147–1155. doi: 10.1007/s00170-011-3878-1
   Web of Science ®Google Scholar
• Baumers, M., L. Beltrametti, A. Gasparre, and R. Hague. 2017. “Informing Additive Manufacturing Technology Adoption: Total Cost and the Impact of Capacity Utilisation.” International Journal of Production Research 55 (23): 6957–6970. doi: 10.1080/00207543.2017.1334978
   Web of Science ®Google Scholar
• Baumers, M., P. Dickens, C. Tuck, and R. Hague. 2016. “The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-Push.” Technological Forecasting and Social Change 102: 193–201. doi: 10.1016/j.techfore.2015.02.015
   Web of Science ®Google Scholar
• Berger, Roland. 2013. Roland Berger Strategy Consultants. http://www.rolandberger.com/media/pdf/Roland_Berger_Additive_Manufacturing_20131129.pdf.
   Google Scholar
• Berman, B. 2012. “3-D Printing: The New Industrial Revolution.” Business Horizons 55 (2): 155–162. doi: 10.1016/j.bushor.2011.11.003
   Web of Science ®Google Scholar
• Bogers, M., R. Hadar, and A. Bilberg. 2016. “Additive Manufacturing for Consumer-centric Business Models: Implications for Supply Chains in Consumer Goods Manufacturing.” Technological Forecasting and Social Change 102: 225–239. doi: 10.1016/j.techfore.2015.07.024
   Web of Science ®Google Scholar
• Boon, W., and B. V. Wee. 2017. “Influence of 3D Printing on Transport: A Theory and Experts Judgment-based Conceptual Model.” Transport Reviews 1: 120.
   Google Scholar
• Costabile, G., M. Fera, F. Fruggiero, A. Lambiase, and D. Pham. 2017. “Cost Models of Additive Manufacturing: A Literature Review.” International Journal of Industrial Engineering Computations 8 (2): 263–283. doi: 10.5267/j.ijiec.2016.9.001
   Web of Science ®Google Scholar
• Dentistry. 2011. “Dentistry: Objet to Showcase 3D Printing Solutions for Digital Dentistry at LMT Lab Day, Chicago.” Health and Medicine Week, March 7.
   Google Scholar
• Economist. 2012. “Additive Manufacturing: Print Me a Jet Engine.” The Economist. http://www.economist.com/blogs/schumpeter/2012/11/additive-manufacturing.
   Google Scholar
• Gupta, D., and S. Benjaafar. 2004. “Make-to-order, Make-to-stock, or Delay Product Differentiation? A Common Framework for Modeling and Analysis.” IIE Transactions 36 (6): 529–546. doi: 10.1080/07408170490438519
   Web of Science ®Google Scholar
• Ha, S., K. Ransikarbum, H. Han, D. Kwon, H. Kim, and N. Kim. 2018. “A Dimensional Compensation Algorithm for Vertical Bending Deformation of 3D Printed Parts in Selective Laser Sintering.” Rapid Prototyping Journal 24 (6): 955–963. doi: 10.1108/RPJ-12-2016-0202
   Web of Science ®Google Scholar
• Hennessey, R. 2013. “3D Printing Hits the Fashion World.” http://www.forbes.com/sites/rachelhennessey/2013/08/07/3-d-printed-clothes-coud-be-the-next-big-thing-to-hit-fashion/.
   Google Scholar
• Holland, S., T. Foster, W. MacNaughtan, and C. Tuck. 2018. “Design and Characterisation of Food Grade Powders and Inks for Microstructure Control Using 3D Printing.” Journal of Food Engineering 220: 12–19. doi: 10.1016/j.jfoodeng.2017.06.008
   Web of Science ®Google Scholar
• Holmström, J., J. Partanen, J. Tuomi, and M. Walter. 2010. “Rapid Manufacturing in the Spare Parts Supply Chain: Alternative Approaches to Capacity Deployment.” Journal of Manufacturing Technology Management 21 (6): 687–697. doi: 10.1108/17410381011063996
   Google Scholar
• Hopkinson, N., and P. Dickens. 2003. “Analysis of Rapid Manufacturing – Using Layer Manufacturing Processes for Production.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217 (1): 31–39.
   Web of Science ®Google Scholar
• Huang, S. H., P. Liu, A. Mokasdar, and L. Hou. 2013. “Additive Manufacturing and its Societal Impact: A Literature Review.” The International Journal of Advanced Manufacturing Technology 67 (5–8): 1191–1203. doi: 10.1007/s00170-012-4558-5
   Web of Science ®Google Scholar
• Huiskonen, J. 2001. “Maintenance Spare Parts Logistics: Special Characteristics and Strategic Choices.” International Journal of Production Economics 71 (1): 125–133. doi: 10.1016/S0925-5273(00)00112-2
   Web of Science ®Google Scholar
• Jia, F., X. Wang, N. Mustafee, and L. Hao. 2016. “Investigating the Feasibility of Supply Chain-centric Business Models in 3D Chocolate Printing: A Simulation Study.” Technological Forecasting & Social Change 102: 202–213. doi: 10.1016/j.techfore.2015.07.026
   Web of Science ®Google Scholar
• Khajavi, S. H., J. Partanen, and J. Holmström. 2014. “Additive Manufacturing in the Spare Parts Supply Chain.” Computers in Industry 65 (1): 50–63. doi: 10.1016/j.compind.2013.07.008
   Web of Science ®Google Scholar
• Kilpi, J., J. Töyli, and A. Vepsäläinen. 2009. “Cooperative Strategies for the Availability Service of Repairable Aircraft Components.” International Journal of Production Economics 117 (2): 360–370. doi: 10.1016/j.ijpe.2008.12.001
   Web of Science ®Google Scholar
• Lan, H. 2009. “Web-based Rapid Prototyping and Manufacturing Systems: A Review.” Computers in Industry 60 (9): 643–656. doi: 10.1016/j.compind.2009.05.003
   Web of Science ®Google Scholar
• Law, Averill, and David Kelton. 1991. Simulation Modeling and Analysis. Vol. 2. New York: McGraw-Hill.
   Google Scholar
• Li, Y., G. Jia, Y. Cheng, and Y. Hu. 2017. “Additive Manufacturing Technology in Spare Parts Supply Chain: A Comparative Study.” International Journal of Production Research 55 (5): 1498–1515. doi: 10.1080/00207543.2016.1231433
   Web of Science ®Google Scholar
• Lindemann, C., U. Jahnke, M. Moi, and R. Koch. 2012. “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing.” 23th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, Austin, TX, August 6–8.
   Google Scholar
• Liu, P., S. H. Huang, A. Mokasdar, H. Zhou, and L. Hou. 2014. “The Impact of Additive Manufacturing in the Aircraft Spare Parts Supply Chain: Supply Chain Operation Reference (SCOR) Model-based Analysis.” Production Planning & Control 25 (13–14): 1169–1181. doi: 10.1080/09537287.2013.808835
   Web of Science ®Google Scholar
• Markillie, P. 2012. “A Third Industrial Revolution.” The Economist. http://www.economist.com/node/21552901.
   Google Scholar
• Muir, M., and A. Haddud. 2017. “Additive Manufacturing in the Mechanical Engineering and Medical Industries Spare Parts Supply Chain.” Journal of Manufacturing Technology Management 29 (2): 372–397.
   Web of Science ®Google Scholar
• Niazi, M., and A. Hussain. 2011. “Agent-based Computing from Multi-agent Systems to Agent-based Models: A Visual Survey.” Scientometrics 89 (2): 479–499. doi: 10.1007/s11192-011-0468-9
   Web of Science ®Google Scholar
• Nicol, David. 1988. “Parallel Discrete-event Simulation of FCFS Stochastic Queueing Networks.” PPEALS ‘88 Proceedings of the ACM/SIGPLAN Conference on Parallel Programming: Experience with Applications, Languages and Systems 23 (9): 124–137.
   Google Scholar
• Peres, F., and D. Noyes. 2006. “Envisioning E-logistics Developments: Making Spare Parts In Situ and on Demand – State of the Art and Guidelines for Future Developments.” Computers in Industry 57 (6): 490–503. doi: 10.1016/j.compind.2006.02.010
   Web of Science ®Google Scholar
• Ransikarbum, K., S. Ha, J. Ma, and N. Kim. 2017. “Multi-objective Optimization Analysis for Part-to-Printer Assignment in a Network of 3D-fused Deposition Modeling.” Journal of Manufacturing Systems 43: 35–46. doi: 10.1016/j.jmsy.2017.02.012
   Web of Science ®Google Scholar
• Reeves, P. 2008. “How the Socioeconomic Benefits of Rapid Manufacturing Can Offset Technological Limitations.” RAPID 2008 Conference and Exposition, Lake Buena Vista, FL, May 20–22.
   Google Scholar
• Rickenbacher, L., A. Spierings, and K. Wegener. 2013. “An Integrated Cost-model for Selective Laser Melting (SLM).” Rapid Prototyping Journal 19 (3): 208–214. doi: 10.1108/13552541311312201
   Web of Science ®Google Scholar
• Ruffo, M., and R. Hague. 2007. “Cost Estimation for Rapid Manufacturing Simultaneous Production of Mixed Components Using Laser Sintering.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (11): 1585–1591. doi: 10.1243/09544054JEM894
   Web of Science ®Google Scholar
• Ruffo, M., C. Tuck, and R. Hague. 2006. “Cost Estimation for Rapid Manufacturing-laser Sintering Production for Low to Medium Volumes.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 (9): 1417–1427. doi: 10.1243/09544054JEM517
   Web of Science ®Google Scholar
• Schröder, M., B. Falk, and R. Schmitt. 2015. “Evaluation of Cost Structures of Additive Manufacturing Processes Using a New Business Model.” Procedia CIRP 30: 311–316. doi: 10.1016/j.procir.2015.02.144
   Google Scholar
• Sedacca, B. 2011. “Hand Built by Lasers.” Engineering and Technology 6 (1): 58–60. doi: 10.1049/et.2011.0110
   Google Scholar
• Simao, H., and W. Powell. 2009. “Approximate Dynamic Programming for Management of High-value Spare Parts.” Journal of Manufacturing Technology Management 20 (2): 147–160. doi: 10.1108/17410380910929592
   Google Scholar
• Song, J. S. J., and Y. Zhang. 2016. Stock or Print? Impact of 3D Printing on Spare Parts Logistics. Social Science Electronic Publishing.
   Google Scholar
• Thomas, D. 2016. “Costs, Benefits, and Adoption of Additive Manufacturing: A Supply Chain Perspective.” The International Journal of Advanced Manufacturing Technology 85 (5–8): 1857–1876. doi: 10.1007/s00170-015-7973-6
   PubMed Web of Science ®Google Scholar
• Thomas, D. S., and S. W. Gilbert. 2014. “Costs and Cost-effectiveness of Additive Manufacturing.” NIST Special Publication No. 1176, 12.
   Google Scholar
• Tuck, C., and R. Hague. 2006. “The Pivotal Role of Rapid Manufacturing in the Production of Cost-effective Customized Products.” International Journal of Mass Customisation 1 (2–3): 360–373. doi: 10.1504/IJMASSC.2006.008630
   Google Scholar
• Wagner, S. M., and R. O. Walton. 2016. “Additive Manufacturing’s Impact and Future in the Aviation Industry.” Production Planning & Control 27 (13): 1124–1130. doi: 10.1080/09537287.2016.1199824
   Web of Science ®Google Scholar
• Walter, M., J. Holmström, J. Tuomi, and H. Yrjölä. 2004. “Rapid Manufacturing and Its Impact on Supply Chain Management.” Proceedings of the Logistics Research Network Annual Conference, 9–10.
   Google Scholar
• Wise, R., and P. Baumgartner. 1999. “Go Downstream: The New Profit Imperative in Manufacturing.” Harvard Business Review 77 (5): 133–141.
   PubMed Web of Science ®Google Scholar