Configuration design of scalable reconfigurable manufacturing systems for part family

References

• Abdi, M. R. 2005. Selection of a Layout Configuration for Reconfigurable Manufacturing Systems Using the AHP. Honolulu, Hawaii: ISAHP. http://www.superdecisions.com/∼safety/ISAHP2005/Papers/AbdiR_AHPInReconfigurableManufacturingSystems.pdf.
   Google Scholar
• Abdi, M. R. 2009. “Layout Configuration Selection for Reconfigurable Manufacturing Systems Using the Fuzzy AHP.” International Journal of Manufacturing Technology and Management 17: 149–165. doi: 10.1504/IJMTM.2009.023783
   Google Scholar
• Abdi, M. R., and A. W. Labib. 2003. “A Design Strategy for Reconfigurable Manufacturing Systems (RMSs) Using Analytical Hierarchical Process (AHP): a Case Study.” International Journal of Production Research 41: 2273–2299. doi: 10.1080/0020754031000077266
   Web of Science ®Google Scholar
• Abdi, M. R., and A. W. Labib. 2004. “Grouping and Selecting Products: the Design key of Reconfigurable Manufacturing Systems (RMSs).” International Journal of Production Research 42: 521–546. doi: 10.1080/00207540310001613665
   Web of Science ®Google Scholar
• Abdi, M. R., A. W. Labib, F. D. Edalat, and A Abdi. 2018. “RMS Performance Evaluation Using ANP and Holonic Structure.” In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 197–217. Cham: Springer. https://doi.org/10.1007/978-3-319-76846-5_9.
   Google Scholar
• Aguilar, A., A. Roman-Flores, and J. C. Huegel. 2013. “Design, Refinement, Implementation and Prototype Testing of a Reconfigurable Lathe-Mill.” Journal of Manufacturing Systems 32: 364–371. doi: 10.1016/j.jmsy.2013.01.003
   Web of Science ®Google Scholar
• Andersen, A.-L., T. D. Brunoe, and K. Nielsen. 2015. “Reconfigurable Manufacturing on Multiple Levels: Literature Review and Research Directions.” In Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7–9, 2015, Proceedings, Part I, edited by S. Umeda, M. Nakano, H. Mizuyama, N. Hibino, D. Kiritsis, and G. Von Cieminski, 266–273. Cham: Springer International Publishing.
   Google Scholar
• Ashraf, M., and F. Hasan. 2018. “Configuration Selection for a Reconfigurable Manufacturing Flow Line Involving Part Production with Operation Constraints.” The International Journal of Advanced Manufacturing Technology 98: 2137–2156. doi: 10.1007/s00170-018-2361-7
   Web of Science ®Google Scholar
• Bejlegaard, M., W. Elmaraghy, T. D. Brunoe, A.-L. Andersen, and K. Nielsen. 2018. “Methodology for Reconfigurable Fixture Architecture Design.” CIRP Journal of Manufacturing Science and Technology 23: 172–186. doi: 10.1016/j.cirpj.2018.05.001
   Web of Science ®Google Scholar
• Bensmaine, A., M. Dahane, and L. Benyoucef. 2013. “A Non-Dominated Sorting Genetic Algorithm Based Approach for Optimal Machines Selection in Reconfigurable Manufacturing Environment.” Computers & Industrial Engineering 66: 519–524. doi: 10.1016/j.cie.2012.09.008
   Web of Science ®Google Scholar
• Bortolini, M., F. G. Galizia, and C. Mora. 2018. “Reconfigurable Manufacturing Systems: Literature Review and Research Trend.” Journal of Manufacturing Systems 49: 93–106. doi: 10.1016/j.jmsy.2018.09.005
   Web of Science ®Google Scholar
• Chen, L., F. J. Xi, and A. Macwan. 2005. “Optimal Module Selection for Preliminary Design of Reconfigurable Machine Tools.” Journal of Manufacturing Science and Engineering 127: 104–115. doi: 10.1115/1.1826075
   Web of Science ®Google Scholar
• Dahane, M., and L. Benyoucef. 2016. “An Adapted NSGA-II Algorithm for a Reconfigurable Manufacturing System (RMS) Design Under Machines Reliability Constraints.” In Metaheuristics for Production Systems, edited by E.-G. Talbi, F. Yalaoui, and L. Amodeo, 109–130. Cham: Springer International Publishing.
   Google Scholar
• Dou, J., X. Dai, and Z. Meng. 2009. “Graph Theory-Based Approach to Optimize Single-Product Flow-Line Configurations of RMS.” The International Journal of Advanced Manufacturing Technology 41: 916–931. doi: 10.1007/s00170-008-1541-2
   Web of Science ®Google Scholar
• Dou, J., X. Dai, and Z. Meng. 2010. “Optimisation for Multi-Part Flow-Line Configuration of Reconfigurable Manufacturing System Using GA.” International Journal of Production Research 48: 4071–4100. doi: 10.1080/00207540903036305
   Web of Science ®Google Scholar
• Dou, J., X. Dai, and Z. Meng. 2011. “A GA-based Approach for Optimizing Single-Part Flow-Line Configurations of RMS.” Journal of Intelligent Manufacturing 22: 301–317. doi: 10.1007/s10845-009-0305-7
   Web of Science ®Google Scholar
• Eguia, I., J. C. Molina, S. Lozano, and J. Racero. 2017. “Cell Design and Multi-Period Machine Loading in Cellular Reconfigurable Manufacturing Systems with Alternative Routing.” International Journal of Production Research 55: 2775–2790. doi: 10.1080/00207543.2016.1193673
   Web of Science ®Google Scholar
• Eguia, I., J. Racero, F. Guerrero, and S. Lozano. 2013. “Cell Formation and Scheduling of Part Families for Reconfigurable Cellular Manufacturing Systems Using Tabu Search.” Simulation 89: 1056–1072. doi: 10.1177/0037549713491590
   Google Scholar
• Ersal, T., J. L. Stein, and L. S. Louca. 2004. “A Modular Modeling Approach for the Design of Reconfigurable Machine Tools.” ASME 2004 International Mechanical Engineering Congress and Exposition.
   Google Scholar
• Gadalla, M., and D. Xue. 2017. “Recent Advances in Research on Reconfigurable Machine Tools: A Literature Review.” International Journal of Production Research 55: 1440–1454. doi: 10.1080/00207543.2016.1237795
   Web of Science ®Google Scholar
• Garbie, H. I. 2014. “Performance Analysis and Measurement of Reconfigurable Manufacturing Systems.” Journal of Manufacturing Technology Management 25: 934–957. doi: 10.1108/JMTM-07-2011-0070
   Google Scholar
• Goyal, K. K., P. Jain, and M. Jain. 2012. “Optimal Configuration Selection for Reconfigurable Manufacturing System Using NSGA II and TOPSIS.” International Journal of Production Research 50: 4175–4191. doi: 10.1080/00207543.2011.599345
   Web of Science ®Google Scholar
• Haddou Benderbal, H., M. Dahane, and L. Benyoucef. 2018. “Modularity Assessment in Reconfigurable Manufacturing System (RMS) Design: an Archived Multi-Objective Simulated Annealing-based Approach.” The International Journal of Advanced Manufacturing Technology 94: 729–749. doi: 10.1007/s00170-017-0803-2
   Web of Science ®Google Scholar
• Karp, R. M. 1972. Reducibility among Combinatorial Problems. Complexity of Computer Computations. Boston: Springer.
   Google Scholar
• Katz, R. 2007. “Design Principles of Reconfigurable Machines.” The International Journal of Advanced Manufacturing Technology 34: 430–439. doi: 10.1007/s00170-006-0615-2
   Web of Science ®Google Scholar
• Koren, Y. 2006. General RMS Characteristics. Comparison with Dedicated and Flexible Systems. Reconfigurable Manufacturing Systems and Transformable Factories. Berlin, Heidelberg: Springer.
   Google Scholar
• Koren, Y., U. Heisel, F. Jovane, T. Moriwaki, G. Pritschow, G. Ulsoy, and H. Van brussel. 1999. “Reconfigurable Manufacturing Systems.” CIRP Annals – Manufacturing Technology 48: 527–540. doi: 10.1016/S0007-8506(07)63232-6
   Web of Science ®Google Scholar
• Koren, Y., S. J. Hu, and T. W. Weber. 1998. “Impact of Manufacturing System Configuration on Performance.” CIRP Annals – Manufacturing Technology 47: 369–372. doi: 10.1016/S0007-8506(07)62853-4
   Google Scholar
• Koren, Y., and S. Kota. 1999. Reconfigurable Machine Tool. Google Patents.
   Google Scholar
• Koren, Y., and M. Shpitalni. 2010. “Design of Reconfigurable Manufacturing Systems.” Journal of Manufacturing Systems 29: 130–141. doi: 10.1016/j.jmsy.2011.01.001
   Web of Science ®Google Scholar
• Koren, Y., and A. Ulsoy. 2002. “Vision, Principles and Impact of Reconfigurable Manufacturing Systems.” Powertrain International 5: 14–21.
   Google Scholar
• Koren, Y., W. Wang, and X. Gu. 2017. “Value Creation Through Design for Scalability of Reconfigurable Manufacturing Systems.” International Journal of Production Research 55: 1227–1242. doi: 10.1080/00207543.2016.1145821
   Web of Science ®Google Scholar
• Landers, R. G., B.-K. Min, and Y. Koren. 2001. “Reconfigurable Machine Tools.” CIRP Annals-Manufacturing Technology 50: 269–274. doi: 10.1016/S0007-8506(07)62120-9
   Web of Science ®Google Scholar
• Li, X., A. E. Bayrak, B. I. Epureanu, and Y. Koren. 2018. “Real-time Teaming of Multiple Reconfigurable Manufacturing Systems.” CIRP Annals 67: 437–440. doi: 10.1016/j.cirp.2018.04.051
   Web of Science ®Google Scholar
• Maier-Speredelozzi, V., and S. J. Hu. 2002. “Selecting Manufacturing System Configurations Based on Performance Using AHP.” Technical Papers-Society of Manufacturing Engineers-All Series.
   Google Scholar
• Maier-Speredelozzi, V., Y. Koren, and S. Hu. 2003. “Convertibility Measures for Manufacturing Systems.” CIRP Annals-Manufacturing Technology 52: 367–370. doi: 10.1016/S0007-8506(07)60603-9
   Web of Science ®Google Scholar
• Mehrabi, M. G., A. G. Ulsoy, Y. Koren, and P. Heytler. 2002. “Trends and Perspectives in Flexible and Reconfigurable Manufacturing Systems.” Journal of Intelligent Manufacturing 13: 135–146. doi: 10.1023/A:1014536330551
   Web of Science ®Google Scholar
• Moghaddam, S. K., M. Houshmand, and O. Fatahi Valilai. 2018. “Configuration Design in Scalable Reconfigurable Manufacturing Systems (RMS); a Case of Single-Product Flow Line (SPFL).” International Journal of Production Research 56: 3932–3954. doi: 10.1080/00207543.2017.1412531
   Web of Science ®Google Scholar
• Moon, Y. 2006. Reconfigurable Machine Tool Design. Reconfigurable Manufacturing Systems and Transformable Factories. Berlin, Heidelberg: Springer.
   Google Scholar
• Padayachee, J., and G. Bright. 2012. “Modular Machine Tools: Design and Barriers to Industrial Implementation.” Journal of Manufacturing Systems 31: 92–102. doi: 10.1016/j.jmsy.2011.10.003
   Web of Science ®Google Scholar
• Pasek, Z. 2006. Challenges in the Design of Reconfigurable Machine Tools.
   Google Scholar
• Pattanaik, L., P. Jain, and N. Mehta. 2007. “Cell Formation in the Presence of Reconfigurable Machines.” The International Journal of Advanced Manufacturing Technology 34: 335–345. doi: 10.1007/s00170-006-0592-5
   Web of Science ®Google Scholar
• Pérez, R., A. Molina, and M. Ramírez-Cadena. 2014. “Development of an Integrated Approach to the Design of Reconfigurable Micro/Mesoscale CNC Machine Tools.” Journal of Manufacturing Science and Engineering 136: 031003. doi: 10.1115/1.4025405
   Web of Science ®Google Scholar
• Renzi, C., F. Leali, M. Cavazzuti, and A. Andrisano. 2014. “A Review on Artificial Intelligence Applications to the Optimal Design of Dedicated and Reconfigurable Manufacturing Systems.” The International Journal of Advanced Manufacturing Technology 72: 403–418. doi: 10.1007/s00170-014-5674-1
   Web of Science ®Google Scholar
• Son, S.-Y. 2000. “Design Principles and Methodologies for Reconfigurable Machining Systems.” Thesis (PhD), Michigan.
   Google Scholar
• Spicer, J. P. 2002. “A Design Methodology for Scalable Machining Systems.” Thesis (PhD), Michigan.
   Google Scholar
• Spicer, P., and H. J. Carlo. 2007. “Integrating Reconfiguration Cost Into the Design of Multi-Period Scalable Reconfigurable Manufacturing Systems.” Journal of Manufacturing Science and Engineering 129: 202–210. doi: 10.1115/1.2383196
   Web of Science ®Google Scholar
• Spicer, P., Y. Koren, M. Shpitalni, and D. Yip-Hoi. 2002. “Design Principles for Machining System Configurations.” CIRP Annals – Manufacturing Technology 51: 275–280. doi: 10.1016/S0007-8506(07)61516-9
   Web of Science ®Google Scholar
• Spicer, P., D. Yip-Hoi, and Y. Koren. 2005. “Scalable Reconfigurable Equipment Design Principles.” International Journal of Production Research 43: 4839–4852. doi: 10.1080/00268970500183042
   Web of Science ®Google Scholar
• Takahashi, K., K. Morikawa, T. Myreshka, T. Ohiro, and A. Takubo. 2006. “Selecting an Optimal Production Order and Its Corresponding Configuration in a Reconfigurable Manufacturing System with Multiple Product Groups.” In Reconfigurable Manufacturing Systems and Transformable Factories, edited by A. I. Dashchenko, 609–626. Berlin, Heidelberg: Springer Berlin Heidelberg.
   Google Scholar
• Tang, L., D. M. Yip-Hoi, W. Wang, and Y. Koren. 2004. “Concurrent Line-Balancing, Equipment Selection and throughput Analysis for Multi-Part Optimal Line Design.” Journal for Manufacturing Science and Production 6: 71–82. doi: 10.1515/IJMSP.2004.6.1-2.71
   Google Scholar
• Tang, L., D. Yip-Hoi, W. Wang, and Y. Koren. 2005. “Selection Principles on Manufacturing System for Part Family.” Proceedings of the CIRP 3rd international conference on reconfigurable manufacturing, Ann Arbor, MI.
   Google Scholar
• Wang, W., and Y. Koren. 2012. “Scalability Planning for Reconfigurable Manufacturing Systems.” Journal of Manufacturing Systems 31: 83–91. doi: 10.1016/j.jmsy.2011.11.001
   Web of Science ®Google Scholar
• Xiaobo, Z., W. Jiancai, and L. Zhenbi. 2000. “A Stochastic Model of a Reconfigurable Manufacturing System Part 1: A Framework.” International Journal of Production Research 38: 2273–2285. doi: 10.1080/00207540050028098
   Web of Science ®Google Scholar
• Xiaobo, Z., J. Wang, and Z. Luo. 2000. “A Stochastic Model of a Reconfigurable Manufacturing System Part 2: Optimal Configurations.” International Journal of Production Research 38: 2829–2842. doi: 10.1080/002075400411501
   Web of Science ®Google Scholar
• Xiaobo, Z., J. Wang, and Z. Luo. 2001a. “A Stochastic Model of a Reconfigurable Manufacturing System Part 3: Optimal Selection Policy.” International Journal of Production Research 39: 747–758. doi: 10.1080/00207540010005754
   Web of Science ®Google Scholar
• Xiaobo, Z., J. Wang, and Z. Luo. 2001b. “A Stochastic Model of a Reconfigurable Manufacturing System – Part 4: Performance Measure.” International Journal of Production Research 39: 1113–1126. doi: 10.1080/00207540010022962
   Web of Science ®Google Scholar
• Yamada, Y. 2006. “Dynamic Reconfiguration of Reconfigurable Manufacturing Systems Using Particle Swarm Optimization.” Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006, Ann Arbor. IEEE, 1444–1449.
   Google Scholar
• Yamada, Y., K. Ookoudo, and Y. Komura. 2003. “Layout Optimization of Manufacturing Cells and Allocation Optimization of Transport Robots in Reconfigurable Manufacturing Systems Using Particle Swarm Optimization.” Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and systems, 2003. (IROS 2003), October 27–31, 2003. 2049–2054.
   Google Scholar
• Yang, S., and S. Hu. 2000. “Productivity Analysis of a six CNC Machine Manufacturing System with Different Configurations.” Proceedings of the 2000 Japan-USA flexible Automation Conference, 499–505.
   Google Scholar
• Youssef, A. M., and H. A. Elmaraghy. 2006a. “Assessment of Manufacturing Systems Reconfiguration Smoothness.” The International Journal of Advanced Manufacturing Technology 30: 174–193. doi: 10.1007/s00170-005-0034-9
   Web of Science ®Google Scholar
• Youssef, A. M., and H. A. Elmaraghy. 2006b. “Modelling and Optimization of Multiple-Aspect RMS Configurations.” International Journal of Production Research 44: 4929–4958. doi: 10.1080/00207540600620955
   Web of Science ®Google Scholar
• Youssef, A. M., and H. A. Elmaraghy. 2007. “Optimal Configuration Selection for Reconfigurable Manufacturing Systems.” International Journal of Flexible Manufacturing Systems 19: 67–106. doi: 10.1007/s10696-007-9020-x
   Google Scholar
• Youssef, A., and H. Elmaraghy. 2008. “Availability Consideration in the Optimal Selection of Multiple-Aspect RMS Configurations.” International Journal of Production Research 46: 5849–5882. doi: 10.1080/00207540701261626
   Web of Science ®Google Scholar
• Yu, J.-M., H.-H. Doh, H.-W. Kim, J.-S. Kim, D.-H. Lee, and S.-H. Nam. 2012. “Iterative Algorithms for Part Grouping and Loading in Cellular Reconfigurable Manufacturing Systems.” Journal of the Operational Research Society 63: 1635–1644. doi: 10.1057/jors.2012.9
   Web of Science ®Google Scholar
• Zheng, W., and H. Zhong. 2012. Reconfigurable Machine Tools Design Methodology.
   Google Scholar
• Zhong, W., V. Maier-Speredelozzi, A. Bratzel, S. S. Young, and S. Hu. 2000. “Performance Analysis of Machining Systems with Different Configurations.” Proceedings 2000 Japan-USA flexible Automation Conference, 7.
   Google Scholar