Characteristics of changeable systems across value chains

References

• Aguila, J. O., and W. ElMaraghy. 2018. “Structural Complexity and Robustness of Supply Chain Networks Based on Product Architecture.” International Journal of Production Research 56 (20): 6701–6718. doi:10.1080/00207543.2018.1489158.
   Google Scholar
• Ahmad, N., D. C. Wynn, and P. J. Clarkson. 2013. “Change Impact on a Product and its Redesign Process: a Tool for Knowledge Capture and Reuse.” Research in Engineering Design 24: 219–244.
   Web of Science ®Google Scholar
• Alblas, A., and J. Jayaram. 2015. “Design Resilience in the Fuzzy Front end (FFE) Context: an Empirical Examination.” International Journal of Production Research 53 (22): 6820–6838. doi:10.1080/00207543.2014.899718.
   Web of Science ®Google Scholar
• Barbosa, C., and A. Azevedo. 2019. “Assessing the Impact of Performance Determinants in Complex MTO/ETO Supply Chains Through an Extended Hybrid Modelling Approach.” International Journal of Production Research 57 (11): 3577–3597. doi:10.1080/00207543.2018.1543970.
   Web of Science ®Google Scholar
• Bauer, H., A. Schönmann, and G. Reinhart. 2017. Approach for Model-Based Change Impact Analysis in Factory Systems. 2017 IEEE International Systems Engineering Symposium (ISSE), IEEE, October 2017, pp.1-7, DOI: 10.1109/SysEng.2017.8088301.
   Google Scholar
• Brooks, C., and G. M. Mocko. 2011. A Method for Evaluating Manufacturing Change in Engineering Design. Proc. ASME 2011 Int. Des. Eng. Tech. Conf. Comput. Inf. Eng. Conf. 1–10.
   Google Scholar
• Chen, S. L., R. J. Jiao, and M. M. Tsend. 2009. “Evolutionary Product Line Design Balancing Customer Needs and Product Commonality.” CIRP Annals – Manufacturing Technology 58 (1): 123–126.
   Web of Science ®Google Scholar
• Clarkson, P. J., C. Simons, and C. Eckert. 2004. “Predicting Change Propagation in Complex Design.” Journal of Mechanical Design 126: 788.
   Web of Science ®Google Scholar
• Do, N., I. J. Choi, and M. Song. 2008. “Propagation of Engineering Changes to Multiple Product Data Views Using History of Product Structure Changes.” International Journal of Computer Integrated Manufacturing 21: 19–32.
   Web of Science ®Google Scholar
• Dolgui, A., D. Ivanov, and B. Sokolov. 2018. “Ripple Effect in the Supply Chain: an Analysis and Recent Literature.” International Journal of Production Research 7543: 1–17.
   Google Scholar
• Eckert, C., P. J. Clarkson, and W. Zanker. 2004. “Change and Customisation in Complex Engineering Domains.” Research in Engineering Design 15: 1–21.
   Web of Science ®Google Scholar
• Egger, J., and T. Masood. 2020. “Augmented Reality in Support of Intelligent Manufacturing – A Systematic Literature Review”.” Computers & Industrial Engineering 140. 106195, 1--22.doi:10.1016/j.cie.2019.106195.
   Web of Science ®Google Scholar
• Eisa, H., A. Garstenauer, and T. Blackburn. 2018. “Causes of Engineering Change Propagation: An Analysis During Product Lifecycle.” Engineering Management Journal 30: 3–13.
   Web of Science ®Google Scholar
• Ellram, L. M., W. L. Tate, and C. R. Carter. 2007. “Product-process-supply Chain: an Integrative Approach to Three-Dimensional Concurrent Engineering.” International Journal of Physical Distribution & Logistics Management 37: 305–330.
   Google Scholar
• ElMaraghy, W., H. ElMaraghy, T. Tomiyama, and L. Monostori. 2012. “Complexity in Engineering Design and Manufacturing.” CIRP Annals – Manufacturing Technology 61: 793–814.
   Web of Science ®Google Scholar
• Ernst, H. 2002. “Success Factors of new Product Development: A Review of the Empirical Literature.” International Journal of Management Reviews 4: 1–40.
   Web of Science ®Google Scholar
• Fei, G., J. Gao, O. Owodunni, and X. Tang. 2011. “A Method for Engineering Design Change Analysis Using System Modelling and Knowledge Management Techniques.” International Journal of Computer Integrated Manufacturing 24: 535–551.
   Web of Science ®Google Scholar
• Fine, C. H. 1998. ClockSpeed:Winning Industry Control in the Age of Temporary Advantage. Massachusetts: Perseus Books Reading.
   Google Scholar
• Fine, C. H., B. Golany, and H. Naseraldin. 2005. “Modeling Tradeoffs in Three-Dimensional Concurrent Engineering: A Goal Programming Approach.” Journal of Operations Management 23: 389–403.
   Web of Science ®Google Scholar
• Fricke, E., B. Gebhard, H. Negele, and E. Igenbergs. 2000. “Coping with Changes: Causes, Findings and Strategies.” Systems Engineering 3: 169–179.
   Google Scholar
• Fricke, E., and A. P. Schulz. 2005. “Design for Changeability (DfC): Principles to Enable Changes in Systems Throughout Their Entire Lifecycle.” Systems Engineering 8: 342–359.
   Google Scholar
• Gernhardt, B., T. Vogel, M. Givehchi, L. Wang, and M. Hemmje. 2016. Knowledge-based production planning within the reference planning process supporting manufacturing change management. Proc. ASME 2016 Int. Manuf. Sci. Eng. Conf. MSEC2016, Blacksburg, Virginia, USA, 27 June - 1 July 2016, 1–10.
   Google Scholar
• Giffin, M., O. De Weck, B. Gergana, R. Keller, C. Eckert, and P. J. Clarkson. 2009. “Change Propagation Analysis in Complex Technical Systems.” Journal of Mechanical Design 131: 1–14.
   Web of Science ®Google Scholar
• Hamraz, B., N. H. M. Caldwell, and P. J. Clarkson. 2013a. “A Holistic Categorization Framework for Literature on Engineering Change Management.” Systems Engineering 16: 473–505.
   Web of Science ®Google Scholar
• Hamraz, B., N. H. M. Caldwell, and P. John Clarkson. 2012. “A Multidomain Engineering Change Propagation Model to Support Uncertainty Reduction and Risk Management in Design.” Journal of Mechanical Design 134 (10). 100905, 1--14.doi:10.1115/1.4007397.
   PubMed Web of Science ®Google Scholar
• Hamraz, B., N. H. M. Caldwell, D. C. Wynn, and P. J. Clarkson. 2013b. “Requirements-based Development of an Improved Engineering Change Management Method.” Journal of Engineering Design 24: 765–793.
   Web of Science ®Google Scholar
• Hamraz, B., and P. J. Clarkson. 2015. “Industrial Evaluation of FBS Linkage – a Method to Support Engineering Change Management.” Journal of Engineering Design 26: 24–47.
   Web of Science ®Google Scholar
• Hawer, S., B. Sager, H. Braun, and G. Reinhart. 2017. “An Adaptable Model for the Factory Planning Process: Analyzing Data Based Interdependencies.” Procedia CIRP 62: 117–122.
   Google Scholar
• Hein, P. H., N. Voris, and B. Morkos. 2018. “Predicting Requirement Change Propagation Through Investigation of Physical and Functional Domains.” Research in Engineering Design 29: 309–328.
   Web of Science ®Google Scholar
• Hoang, X.-L., P. Marks, M. Weyrich, and A. Fay. 2017. “Modeling of Interdependencies Between Product, Processes and Resources to Support the Evolution of Mechatronic Systems.” IFAC-PapersOnLine 50: 4348–4353.
   Google Scholar
• Hu, J., and M.-A. Cardin. 2015. “Generating Flexibility in the Design of Engineering Systems to Enable Better Sustainability and Lifecycle Performance.” Research in Engineering Design 26: 121–143.
   Web of Science ®Google Scholar
• Huang, G. Q., and K. L. Mak. 1999. “Current Practices of Engineering Change Management in UK Manufacturing Industries.” International Journal of Operations & Production Management 19: 21–37.
   Web of Science ®Google Scholar
• Ilhami, M. A., A. Subagyo, and N. A. Masruroh. 2018. “Trade-offs Mathematical Modelling of 3DCE in new Product Development: Real Three Dimensions and Directions for Development.” IOP Conference Series: Materials Science and Engineering 337. 012025, 1--6.doi:10.1088/1757-899X/337/1/012025.
   Google Scholar
• Ivanov, D., B. Sokolov, and A. Dolgui. 2014. “The Ripple Effect in Supply Chains: Trade-off “Efficiency-Flexibility- Resilience” in Disruption Management.” International Journal of Production Research 52: 2154–2172.
   Web of Science ®Google Scholar
• Jarrett, T. A. W., C. M. Eckert, N. H. M. Caldwell, and P. J. Clarkson. 2011. “Engineering Change: an Overview and Perspective on the Literature.” Research in Engineering Design 22 (2): 103–124.
   Web of Science ®Google Scholar
• Karthik, K., and K. J. Reddy. 2016. “Engineering Changes in Product Design - A Review.” IOP Conference Series: Materials Science and Engineering 149: 1–13.
   Google Scholar
• Keller, R., C. M. Eckert, and P. J. Clarkson. 2005. Multiple views to support engineering change management for complex products. 3rd Int. Conf. Coord. Mult. Views Explor. Vis. 33–41.
   Google Scholar
• Kim, S.-G. 2004. "Axiomatic Design of Multi-Scale Systems." Proceedings of The Third International Conference on Axiomatic Design (ICAD-2004), Seoul, 21-24 June, 2004. ICAD-2004-29, 1--5.
   Google Scholar
• Kocar, V., and A. Akgunduz. 2010. “ADVICE: A Virtual Environment for Engineering Change Management.” Computers in Industry 61: 15–28.
   Web of Science ®Google Scholar
• Koch, J., A. Gritsch, and G. Reinhart. 2016. “Process Design for the Management of Changes in Manufacturing: Toward a Manufacturing Change Management Process.” CIRP Journal of Manufacturing Science and Technology 14: 10–19.
   Web of Science ®Google Scholar
• Koh, E. C. Y. 2017. “A Study on the Requirements to Support the Accurate Prediction of Engineering Change Propagation.” Systems Engineering 20: 147–157.
   Web of Science ®Google Scholar
• Koh, E. C. Y., N. H. M. Caldwell, and P. J. Clarkson. 2012. “A Method to Assess the Effects of Engineering Change Propagation.” Research in Engineering Design 23: 329–351.
   Web of Science ®Google Scholar
• Koh, E. C. Y., N. H. M. Caldwell, and P. J. Clarkson. 2013. “A Technique to Assess the Changeability of Complex Engineering Systems.” Journal of Engineering Design 24: 477–498.
   Web of Science ®Google Scholar
• Koh, E. C. Y., A. Förg, M. Kreimeyer, and M. Lienkamp. 2015. “Using Engineering Change Forecast to Prioritise Component Modularisation.” Research in Engineering Design 26: 337–353.
   Web of Science ®Google Scholar
• Lee, J., and Y. S. Hong. 2015. “Design Freeze Sequencing Using Bayesian Network Framework.” Industrial Management and Data Systems 115 (7): 1204–1224.
   Web of Science ®Google Scholar
• Leng, S., L. Wang, G. Chen, and D. Tang. 2016. “Engineering Change Information Propagation in Aviation Industrial Manufacturing Execution Processes.” The International Journal of Advanced Manufacturing Technology 83: 575–585.
   Web of Science ®Google Scholar
• Li, H.-H. J., Y. J. Shi, M. Gregory, and K. H. Tan. 2014. “Rapid Production Ramp-up Capability: a Collaborative Supply Network Perspective.” International Journal of Production Research 52: 2999–3013.
   Web of Science ®Google Scholar
• Li, Y., W. Zhao, and S. Tong. 2017. “Simulation Based Scheduling of Multiple Change Propagations in Multistage Product Development Processes.” Expert Systems with Applications 89: 1–19.
   Web of Science ®Google Scholar
• Malak, R. C., and J. C. Aurich. 2013. “Software Tool for Planning and Analyzing Engineering Changes in Manufacturing Systems.” Procedia CIRP 12: 348–353.
   Google Scholar
• Malik, A. A., T. Masood, and A. Bilberg. 2020a. “Virtual Reality in Manufacturing: Immersive and Collaborative Artificial-Reality in Design of Human-Robot Workspace.” International Journal of Computer Integrated Manufacturing 33 (1): 22–37. doi:10.1080/0951192X.2019.1690685.
   Web of Science ®Google Scholar
• Malik, A. A., T. Masood, and R. Kousar. 2020b. Reconfiguring and ramping-up ventilator production in the face of COVID-19: Can robots help? pre-print, 15 April 2020, arXiv:2004.07360, https://arxiv.org/abs/2004.07360.
   Google Scholar
• Malik, A. A., T. Masood, and R. Kousar. 2020c. “Repurposing Factories with Robotics in the face of COVID-19.” Science Robotics 5 (43). eabc2782 (2 pages + 1:31 minute simulation movie). doi: 10.1126/scirobotics.abc2782.
   PubMed Web of Science ®Google Scholar
• Masmoudi, M., P. Leclaire, M. Zolghadri, and M. Haddar. 2017. “Engineering Change Management: A Novel Approach for Dependency Identification and Change Propagation for Product Redesign.” IFAC-PapersOnLine 50: 12410–12415.
   Google Scholar
• Masood, T., and J. Egger. 2019. “Augmented Reality in Support of Industry 4.0 – Implementation Challenges and Success Factors.” Robotics and Computer-Integrated Manufacturing 58: 181–195. doi:10.1016/j.rcim.2019.02.003.
   Web of Science ®Google Scholar
• Masood, T., and J. Egger. 2020. “Adopting Augmented Reality in the age of Industrial Digitalisation.” Computers in Industry 115. 103112, 1--14.doi:10.1016/j.compind.2019.07.002.
   Web of Science ®Google Scholar
• Masood, T., J. Robinson, and P. J. Clarkson. 2017a. Designing a resilient supply network for the manufacture of modular buildings: In European Operations Management Association (EurOMA) Conference. Edinburgh, 1-5 July 2017, 10 pages.
   Google Scholar
• Masood, T., E. So, and D. McFarlane. 2017b. Disaster Management Operations – Big Data Analytics to Resilient Supply Networks: In European Operations Management Association (EurOMA) Conference. Edinburgh, 1-5 July 2017, 10 pages.
   Google Scholar
• Masood, T., and P. Sonntag. 2020. "Industry 4.0: Adoption Challenges and Benefits for SMEs." Computers in Industry 121. 103261, 1--12. doi: 10.1016/j.compind.2020.103261.
   Google Scholar
• Masood, T., and R. H. Weston. 2012. Enabling Competitive Design of Next Generation Reconfigurable Manufacturing Enterprises. In Enabling Manufacturing Competitiveness and Economic Sustainability. Ed: Elmaraghy, H.A., Springer, Part 4, 409-414, doi: 10.1007/978-3-642-23860-4_67.
   Google Scholar
• Masood, T., and R. H. Weston. 2013. “Modelling Framework to Support Decision-Making in Manufacturing Enterprises.” Advances in Decision Sciences 2013 (234939): 1–23. doi:10.1155/2013/234939.
   Google Scholar
• Masood, T., R. Weston, and A. Rahimifard. 2013. “A Model-Driven Approach to Enabling Change Capability in SMEs.” The International Journal of Advanced Manufacturing Technology 69 (1-4): 805–821. doi:10.1007/s00170-013-4853-9.
   Web of Science ®Google Scholar
• Meyer, M., A. Brintrup, and K. Windt. 2014. “Linking Product and Machine Network Structure Using Nested Pattern Analysis.” Procedia CIRP 17: 278–283.
   Google Scholar
• Mirdamadi, S., S. Addouche, and M. Zolghadri. 2018. “A Bayesian Approach to Model Change Propagation Mechanisms.” Procedia CIRP 70: 1–6.
   Google Scholar
• Morkos, B., P. Shankar, and J. D. Summers. 2012. “Predicting Requirement Change Propagation, Using Higher Order Design Structure Matrices: an Industry Case Study.” Journal of Engineering Design 23 (12): 905–926. doi: 10.1080/09544828.2012.662273.
   Web of Science ®Google Scholar
• Morkos, B., and J. Summers. 2010. “Requirement Change Propagation Prediction Approach: Results From an Industry Case Study.” Proc. ASME Int. Des. Eng. Tech. Conf, 1–11.
   Google Scholar
• Ou-Yang, C., and M. C. Cheng. 2003. “Developing a PDM / MRP Integration Framework to Evaluate the Influence of Engineering Change on Inventory Scrap Cost.” The International Journal of Advanced Manufacturing Technology 22: 161–174.
   Web of Science ®Google Scholar
• Pasqual, M. C., and O. L. De Weck. 2012. “Multilayer Network Model for Analysis and Management of Change Propagation.” Research in Engineering Design 23: 305–328.
   Web of Science ®Google Scholar
• Plehn, C., F. Stein, R. De Neufville, and G. Reinhart. 2016. “Assessing the Impact of Changes and Their Knock-on Effects in Manufacturing Systems.” Procedia CIRP 57: 479–486.
   Google Scholar
• Qazi, A., A. Dickson, J. Quigley, and B. Gaudenzi. 2018. “Supply Chain Risk Network Management: A Bayesian Belief Network and Expected Utility Based Approach for Managing Supply Chain Risks.” International Journal of Production Economics 196: 24–42.
   Web of Science ®Google Scholar
• Quang, H. T., and Y. Hara. 2018. “Risks and Performance in Supply Chain: the Push Effect.” Int. J. Prod. Res 7543: 1–20.
   Google Scholar
• Rashid, A., T. Masood, J. A. Erkoyuncu, B. Tjahjono, N. Khan, and M. Shami. 2018. “Enterprise Systems’ Life Cycle in Pursuit of Resilient Smart Factory for Emerging Aircraft Industry: A Synthesis of Critical Success Factors, Theory, Knowledge Gaps and Implications.” Enterprise Information Systems 12 (2): 96–136. doi:10.1080/17517575.2016.1258087.
   Web of Science ®Google Scholar
• Reddi, K. R., and Y. B. Moon. 2011. “System Dynamics Modeling of Engineering Change Management in a Collaborative Environment.” The International Journal of Advanced Manufacturing Technology 55: 1225–1239.
   Web of Science ®Google Scholar
• Reddi, K. R., and Y. B. Moon. 2013. “Modelling Engineering Change Management in a new Product Development Supply Chain.” International Journal of Production Research 51: 5271–5291.
   Web of Science ®Google Scholar
• Schuh, G., M. Riesener, and S. Breunig. 2017. “Design for Changeability: Incorporating Change Propagation Analysis in Modular Product Platform Design.” Procedia CIRP 61: 63–68.
   Google Scholar
• Shankar, P., B. Morkos, and J. D. Summers. 2012. “Reasons for Change Propagation: A Case Study in an Automotive OEM.” Research in Engineering Design 23: 291–303.
   Web of Science ®Google Scholar
• Shankar, P., J. D. Summers, and K. Phelan. 2017. “A Verification and Validation Planning Method to Address Change Propagation Effects in Engineering Design and Manufacturing.” Concurrent Engineering 25: 151–162.
   Web of Science ®Google Scholar
• Siddharth, L., and P. Sarkar. 2017. “A Methodology for Predicting the Effect of Engineering Design Changes.” Procedia CIRP 60: 452–457.
   Google Scholar
• Singh, S., S. C. Misra, and F. T. S. Chan. 2020. “Establishment of Critical Success Factors for Implementation of Product Lifecycle Management Systems.” International Journal of Production Research 58 (4): 997–1016. doi:10.1080/00207543.2019.1605227.
   Web of Science ®Google Scholar
• Stanev, S., H. Krappe, H. A. Ola, K. Georgoulias, and N. Papakostas. 2008. “Efficient Change Management for the Flexible Production of the Future.” Journal of Manufacturing Technology Management 19 (6): 712–726.
   Google Scholar
• Subrahmanian, E., C. Lee, and H. Granger. 2015. “Managing and Supporting Product Life Cycle Through Engineering Change Management for a Complex Product.” Research in Engineering Design 26: 189–217.
   Web of Science ®Google Scholar
• Tavčar, J., I. Demšar, and J. Duhovnik. 2018. “Engineering Change Management Maturity Assessment Model with Lean Criteria for Automotive Supply Chain.” Journal of Engineering Design 29: 235–257.
   Web of Science ®Google Scholar
• Tavčar, J., and J. Duhovnik. 2005. “Engineering Change Management in Individual and Mass Production.” Robotics and Computer-Integrated Manufacturing 21: 205–215.
   Web of Science ®Google Scholar
• Terwiesch, C., and C. Loch. 1999. “Managing the Process of Engineering Change Orders: the Case of the Climate Control System in Automobile Development.” Journal of Product Innovation Management 16: 160–172.
   Web of Science ®Google Scholar
• Ullah, I., D. Tang, Q. Wang, and L. Yin. 2017. “Least Risky Change Propagation Path Analysis in Product Design Process.” Systems Engineering 20: 379–391.
   Web of Science ®Google Scholar
• Ullah, I., D. Tang, and L. Yin. 2016. “Engineering Product and Process Design Changes: A Literature Overview.” Procedia CIRP 56: 25–33.
   Google Scholar
• Ullah, I., D. Tang, L. Yin, I. Hussain, and Q. Wang. 2018. “Cost-effective Propagation Paths for Multiple Change Requirements in the Product Design.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232: 1572–1585.
   Web of Science ®Google Scholar
• Váncza, J., L. Monostori, D. Lutters, S. R. Kumara, M. Tseng, and P. Valckenaers. 2011. “Cooperative and Responsive Manufacturing Enterprises.” CIRP Annals – Manufacturing Technology 60: 797–820.
   Web of Science ®Google Scholar
• Vernadat, F. B., F. T. S. Chan, A. Molina, S. Y. Nof, and H. Panetto. 2018. “Information Systems and Knowledge Management in Industrial Engineering: Recent Advances and new Perspectives.” International Journal of Production Research 56 (8): 2707–2713. doi:10.1080/00207543.2018.1454615.
   Web of Science ®Google Scholar
• Wänström, C., and P. Jonsson. 2006. “The Impact of Engineering Changes on Materials Planning.” Journal of Manufacturing Technology Management 17: 561–584.
   Google Scholar
• Wasmer, A., G. Staub, and R. W. Vroom. 2011. “An Industry Approach to Shared, Cross-Organisational Engineering Change Handling - The Road Towards Standards for Product Data Processing.” Comput. Des 43: 533–545.
   Web of Science ®Google Scholar
• Wiendahl, H. P., H. A. ElMaraghy, P. Nyhuis, M. F. Zäh, H. H. Wiendahl, N. Duffie, and M. Brieke. 2007. “Changeable Manufacturing - Classification, Design and Operation.” CIRP Annals – Manufacturing Technology 56: 783–809.
   Web of Science ®Google Scholar
• Wu, W.-H., L.-C. Fang, W.-Y. Wang, M.-C. Yu, and H.-Y. Kao. 2014. “An Advanced CMII-Based Engineering Change Management Framework: the Integration of PLM and ERP Perspectives.” International Journal of Production Research 52 (20): 6092–6109. doi:10.1080/00207543.2014.911987.
   Web of Science ®Google Scholar
• Wynn, D. C., N. H. M. Caldwell, and P. J. Clarkson. 2014. “Predicting Change Propagation in Complex Design Workflows.” J. Mech. Des 136: 1–13.
   Web of Science ®Google Scholar
• Yang, J., M. Goltz, and S. Han. 2004. “Parameter-based Engineering Changes for a Distributed Engineering Environment.” Concurrent Engineering 12: 275–286.
   Web of Science ®Google Scholar
• Yin, L., D. Tang, Y. Kang, and S. Leng. 2016. “Topology Face – Based Change Propagation Analysis in Aircraft- Assembly Tooling Design.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230: 120–135.
   Web of Science ®Google Scholar
• Yin, L., D. Tang, Q. Wang, I. Ullah, and H. Zhang. 2017. “Engineering Change Management of Product Design Using Model-Based Definition Technology.” Journal of Computing and Information Science in Engineering 17 (4). 041006, 1--19.doi:10.1115/1.4036121.
   Web of Science ®Google Scholar